Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

Metalworking Fluids

For more than 60 years TRIM® metalworking fluids has lead the industry for all types of cutting and grinding operations. Known worldwide for superior performance, TRIM meets the demands of specialized industries such as automotive, aerospace, and medical parts manufacturers.

For the full range of cutting and grinding applications for synthetics, semisynthetics, and soluble oils, TRIM delivers longer tool and sump life, better finished parts, and a better bottom line.

Number of products in category is 45

TRIM® C116

Low-foam synthetic

TRIM C116 is a high-performance synthetic fluid for working cast iron and mild steels. State-of the-art technologies provide excellent cooling and chip settling, very low foam, good tramp oil rejection and machine cleanliness while leaving a protective film on the machine tool.

  • Provides excellent corrosion inhibition on ferrous alloys
  • Excellent biostability
  • Extremely low carry off for very low total operation costs
  • Very low foam and mist
  • Low chemical odour
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools
  • Very good tramp oil rejection

TRIM® C120 CG

Carbide Grinding Synthetic Fluid

TRIM C120 CG is formulated specifically for the carbide grinding industry. This synthetic product is intended for grinding carbide, but is equally good on ceramics, cermets, chill cast alloys and tool steels. TRIM C120 CG minimises cobalt leaching while still maintaining superior cutting and non-cutting characteristics.

  • Keeps super-abrasive wheels clean
  • Does not attack wheel bonding systems
  • Designed to carry grinding swarf to the filter but will release swarf in properly designed settling tanks
  • Will not be stripped out by conventional filtration systems
  • Is low foaming
  • Rejects tramp oil
  • Has superior sump life
  • Resists cobalt leaching for improved operator safety, stronger parts and cleaner machines
  • Very low carryoff for extremely low fluid operating costs
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C270

High-performance Synthetic

TRIM<sup>®</sup> C270

This product has Rolls Royce Approval CSS 130

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odour which dissipates further after one or two days

TRIM® C272

Cutting and Grinding Fluid Concentrate

TRIM C272 is a synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM C272 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C272 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes

  • Approved by the following aero engine OEMs – Rolls-Royce, GE and Safran Aero Engines, contact your Master Fluid Solutions representative for the relevant approval documentation
  • Very stable formula provides long operational life with consistent performance
  • Extremely low foam in mineral free water
  • Excellent tramp oil rejection
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C274

High-performance low-foam synthetic

TRIM C274 is a high-performance synthetic fluid for working cast iron and steel alloys as well as corrosion resistant alloys such as inconel and titanium. TRIM C274 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C274 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes.

  • Very stable formula provides long operational life with consistent performance
  • Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE)
  • Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding
  • Extremely low foam in mineral free water
  • Excellent tramp oil rejection
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C276

Clean-running Synthetic

TRIM<sup>®</sup> C276

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling and tapping operations
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odour which dissipates further after one or two days
  • Minimizes the buildup of sticky residues

TRIM® C276WP

Cutting and Grinding Fluid Concentrate

TRIM C276WP is a synthetic coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM C276WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C276WP has superior cooling, rust prevention and chip settling characteristics of a premium synthetic product combined with excellent compatibility with sensitive aluminium alloys.

  • Very stable formula provides long operational life with consistent performance
  • Extremely low foam in mineral free water
  • Excellent compatibility with sensitive aluminium alloys
  • Excellent tramp oil rejection
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C350

Premium Synthetic Metalworking Fluid

TRIM<sup>®</sup> C350

TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C360

Cutting and Grinding Fluid Concentrate

TRIM C360 is a very low foam, high lubricity, high EP synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. TRIM C360 has been formulated especially for applications where maximum performance is required in machine tools which both machine and grind hard aerospace alloys in the same cycle. Due to its synthetic formula, TRIM C360 has exceptional tramp oil rejecting properties and is highly filterable through even the finest of filtration devices. This, coupled to a superb antimicrobial package, ensures prolonged sump life even in the harshest of machine shop environments.

  • A very versatile product that works well in a wide range of operations
  • Excellent extreme pressure performance without chlorine or sulphur additives
  • Keeps machines extremely clean whilst leaving a soft fluid film that protects metal surfaces
  • Water like working solution ensures low carry-off for low total operating cost
  • Keeps grinding wheels clean for higher feed rates, better surface integrity and faster stock removal
  • Highly filterable even through sub 10μm filters
  • Exceptional sump life
  • Exceptional tramp oil rejection
  • Coolant is easily removed with water or aqueous cleaners

TRIM® E715

Multi-metal Machining Emulsion

TRIM E715 is a high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives
Ian Sandusky / Practical Machinist Interview at 2022 IMTS

TRIM® E720

Amine Free Machining & Grinding Emulsion

TRIM E720 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to heavy duty machining jobs on aluminium and stainless steel. The inhibitor package in TRIM E720 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

  • Very stable formula provides long operational life with consistent performance
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Will run effectively for long periods without the need for costly additives

TRIM® E730

Boron-free, Multi-metal Machining Emulsion

TRIM E730 is a boron-free, high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E730 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM® E806

Magnesium and multi-metal machining emulsion

TRIM E806 is a truly unique metalworking fluid emulsion concentrate with unparalleled metal compatibility and all round machining performance characteristics. The product is primarily designed for machining magnesium alloys used in the aerospace, automotive and general industry sectors. TRIM E806 does not tarnish the most sensitive magnesium alloys even after relatively long exposure times plus it is impervious to magnesium salt build-up in the sump - something which splits normal emulsions in a matter of days. Another problem with magnesium machining, hydrogen gas evolution, is virtually nil with TRIM E806. The product also has the lubricity and extreme pressure performance to machine other alloys commonly seen in the aerospace industry such as wrought aluminiums, stainless steels, inconel® and titanium.

  • Safe for use on even the most sensitive magnesium alloys
  • Little or no hydrogen gas evolution when machining magnesium
  • Bio package extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications

TRIM® E850

Premium Emulsion

TRIM<sup>®</sup> E850

TRIM E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers exceptional lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM® E905

High-lubricity, extreme pressure emulsion

TRIM E905 is a high quality, high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. TRIM E905 has broad application in machining and grinding of a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of TRIM E905 makes it a first choice for high quality, consistent parts manufacturing.

  • A very universal product that works well in a wide range of operations
  • Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
  • Extremely hard water tolerant
  • Very low foam even at high pressures
  • Extremely fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Easily recycled or disposed of without special handling or equipment

TRIM® E909

Amine Free Machining & Grinding Emulsion

TRIM E909 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. Very high levels of extreme pressure additives in this product make it particularly suitable for the heavy duty machining jobs on stainless steel and other difficult to machine alloys. The inhibitor package in TRIM E909 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

  • Very stable formula provides long operational life with consistent performance
  • Hard water tolerant
  • Traditional extreme pressure (EP) additives control built-up edge (BUE)
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Will run effectively for long periods without the need for costly additives

TRIM® E923

Cutting and Grinding Fluid Concentrate

TRIM<sup>®</sup> E923

TRIM E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine free extreme pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations whilst still providing the excellent non-cutting characteristics normally associated with traditional, high quality emulsions from Master Fluid Solutions. The optimised lubricity and extreme pressure package matches heavy duty neat oils on difficult to machine materials such as inconel, titanium, stainless steel and high tensile strength steels.

  • Delivers exceptional lubricity and EP performance
  • Has the necessary performance to replace neat oils in certain applications
  • Very long sump life
  • Low foam even in soft water areas
  • Hard water tolerant
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM® E950

High Performance Machining Emulsion

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM® HyperSol™ 888NXT

neo-synthetic precision aerospace machining fluid

TRIM<sup>®</sup> HyperSol™ 888NXT

Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminium alloys. Delivering low foam, low odour and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

  • exceptional performance on hard aerospace metals
  • superior lubricity for machining softer aluminium alloys
  • trouble-free production
  • safest, environmentally-friendly ingredients
  • long-running lifespan delivers high customer value
  • less scrap, low foam and low odour
Ian Sandusky / Practical Machinist Interview at 2022 IMTS

TRIM® MicroSol™ 456

Low-foam Ferrous Semisynthetic

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminium alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

TRIM® MicroSol™ 515

Cutting and Grinding Fluid Concentrate

TRIM MicroSol 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys.

  • Medium to high levels of lubrication without chlorinated or sulphurised EP additives
  • Compatible with aluminium, all steels, yellow metals and cast iron
  • Extremely hard water tolerant
  • Alternative to emulsion products for machining of high silica aluminium alloys
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • No aggressive biocides
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers, or phenolic compounds

TRIM® MicroSol™ 519

Premium Microemulsion

TRIM MicroSol 519 is a medium to high lubricity, semisynthetic, microemulsion coolant. The formula provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. Whilst it is particularly suited to machining and grinding cast iron and steel, it does very well in mixed metal situations and is a proven performer on aluminium alloys, stainless steels and titanium.

  • Formaldehyde releaser and boron free
  • Low foaming for modern high-pressure, high-volume applications
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 530

High-lubricity Semisynthetic

TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.

  • Lubrication package gives excellent performance for aluminium machining
  • Excellent choice for aluminium alloy wheel machining applications
  • Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel® machining applications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to milky soluble oils on aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and coolant carry-off

TRIM® MicroSol™ 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM<sup>®</sup> MicroSol™ 585XT

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols and chlorinated or sulfurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 590XT

Advanced Technology Aerospace Semisynthetic

TRIM<sup>®</sup> MicroSol™ 590XT

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to milky soluble oils on high-silica aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol™ 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM<sup>®</sup> MicroSol™ 690XT

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Boron and formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols, chlorinated or sulphurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® OE105

Ester Based Superfinishing Oil

TRIM<sup>®</sup> OE105

TRIM OE105 is an ester based neat grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity whilst keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials

  • Excellent extreme-pressure additive package for efficient metal removal
  • Very high lubricity
  • Great detergency
  • Fully saturated ester ensures unsurpassed oxidation stability
  • Ester based formulation ensures very low misting potential
  • Very high flash point for such a low viscosity product
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE209

Ester Based Cutting and Grinding Oil

TRIM<sup>®</sup> OE209

TRIM OE209 is a medium to heavy-duty neat cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximise tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

  • Extremely high lubricity ensures fantastic tool life
  • Excellent detergency keeps grinding wheels clean
  • Does not leach cobalt from carbide tool alloys
  • Chlorine and sulphur free
  • Readily biodegradable
  • Saturated ester based formulation ensures very low foam and misting
  • Very High flash point
  • Unsurpassed oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE310 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE310 NS

TRIM OE310 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE315 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE315 NS

TRIM OE315 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE322 NS

Ester Based Neat Cutting Oil

TRIM<sup>®</sup> OE322 NS

TRIM OE322 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE330 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE330 NS

TRIM OE330 NS is a very heavy-duty neat cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion resistant steel alloys. TRIM OE330 NS is especially effective in slow speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high odour neat oils used in Sunnen honing machines.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OE335

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE335

TRIM OE335 is a heavy-duty neat cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximise tool life in operations such as gear hobbing.

  • Extremely high lubricity ensures fantastic tool life
  • Readily biodegradable
  • Ester based formulation ensures very low misting potential
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® OG108

High Performance Tool Grinding Oil

TRIM<sup>®</sup> OG108

TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

  • Very highly refined base oil ensures low mist and high flash point
  • Good flushing properties keeps grinding wheels very clean
  • Excellent friction reducing properties ensures long wheel life
  • Excellent heat transferring properties
  • Excellent oxidation stability
  • Highly filterable in pre-coat filter systems
  • Low foaming
  • No reaction with cobalt
  • Kind to machine components and elastomers
  • Light colour and low odour for good operator acceptance

TRIM® OG210

General Grinding Oil

TRIM<sup>®</sup> OG210

TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

  • Very highly refined base oil ensures low mist and high flash point
  • Good flushing properties keeps grinding wheels very clean
  • Excellent lubricity and EP properties ensures long wheel life and good surface finish
  • Excellent heat transferring properties
  • Excellent oxidation stability
  • Highly filterable in pre-coat filter systems
  • Low foaming
  • No reaction with cobalt
  • Kind to machine components and elastomers
  • Light colour and low odour for good operator acceptance

TRIM® OG225

Medium to Heavy Duty Neat Grinding Oil

TRIM<sup>®</sup> OG225

TRIM OG225 is a medium to heavy-duty neat oil designed for use in grinding operations of hardened steel alloys, tool steels, stainless steels, inconels and titanium. A carefully selected extreme pressure/anti-wear package together with great detergency ensures TRIM OG225 provides very high stock removal rates in flute grinding without burning. It is also formulated to comply with aerospace regulations, i.e. no chlorine and no active sulphur additives. TRIM OG225 can also be used to machine all materials, including yellow metals, in high pressure applications where low oil mist is advantageous.

  • Excellent extreme-pressure/anti-wear additive package for efficient metal removal
  • Excellent filterability in precoat filter systems
  • Hydrocracked base oil ensures very low misting potential
  • Very High flash point
  • Low foaming
  • Excellent oxidation stability
  • Excellent compatibility with copper containing alloys
  • Light colour and low odour for good operator acceptance

TRIM® SC415

Low Foaming Semisynthetic Fluid

TRIM SC415 is a lower foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products especially in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • A very versatile product that works well in a wide range of operations such as grinding, milling, turning, drilling, and tapping
  • Extremely good product for cast iron and steel machining and grinding
  • Extremely fine emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Extremely hard water tolerant
  • Easily recycled or disposed of without special handling or equipment

TRIM® SC440

Low oil Semisynthetic

TRIM SC440 is a low foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products especially in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • Formaldehyde releaser and boron free
  • Provides superior corrosion inhibition on all ferrous metals
  • Fast wetting to get the fluid to the point of cut and keep grinding wheels clean
  • Low foaming for modern high-pressure, high-volume applications
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Uses standard metalworking recycling and disposal techniques

TRIM® SC440SW

Low foam Semisynthetic

TRIM SC440SW is a very low foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel in soft water. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products. SC440SW's clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • No aggressive biocides
  • Low foaming even in soft water
  • Excellent rust protection to prevent clinkering of cast iron chips
  • Keeps the machine and work environment clean even when machining or grinding grey iron
  • Fine micro-emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and keep grinding wheels clean
  • Easily recycled or disposed of without special handling or equipment

TRIM® SC536

Low-oil Semisynthetic

TRIM<sup>®</sup> SC536

TRIM SC536 is a low oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odour level which usually disappears after on-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC617

High Performance Semisynthetic Fluid

TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.

  • A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
  • Extremely good product for cast iron, steel and stainless steel machining and grinding
  • Low foam profile enables use in through tool machining applications
  • Very fine emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Extremely hard water tolerant
  • Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life

TRIM SOL™ sf

General-purpose Emulsion - Siloxane Free

TRIM SOL™ sf

TRIM™ SOL SF is a very high lubricity soluble oil which is suitable for machining and grinding a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining of difficult materials such as stainless steel, inconel and titanium.

  • A very universal product that works well in a wide range of operations
  • Compatible with aluminium, all steels and yellow metals
  • Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
  • Hard water tolerant
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Siloxane free
  • Easily recycled or disposed of without special handling or equipment

TRIM® TAP NC

Nonchlorinated Tapping Fluid

TRIM<sup>®</sup> TAP NC

TRIM TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

  • Especially for taps up to 25mm diameter
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

TRIM® TC 239

Paintable Antifoam/Defoamer

TRIM<sup>®</sup> TC 239

TRIM TC 239 is a paintable, plateable additive used to control foam in metalworking fluids and parts washing systems.

  • Paintable
  • Plateable

TRIM® TC 256

pH Adjuster

TRIM TC 256 is a mixture of compounds that are very effective in maintaining pH and building reserve alkalinity in metalworking fluid working solutions. Controlling pH within the design range of the product and maintaining an appropriate level of reserve alkalinity are key elements in extending sump life, controlling both liquid and vapor phase corrosion, and emulsion stability of soluble oils.

  • pH adjustment
  • Building reserve alkalinity
  • Extending sump life
  • Controlling both liquid and vapor phase corrosion