Home

Home

Spray Alkaline In-process Cleaners

Master STAGES™ spray cleaners clean faster for increased production in applications where the cleaning fluid is sprayed onto the parts. Master STAGES spray cleaners are low foaming and operate at low concentrations and lower temperatures, which increases your bottom line by reducing makeup and saving energy costs. Master STAGES spray cleaners provide corrosion inhibition and eliminate staining rejects.

Number of products in category is 6

Master STAGES™ CLEAN 2017

Economical Heavy-duty Spray Cleaner

Master STAGES™ CLEAN 2017

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

  • Very economical way to remove heavy soils and light rust
  • Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
  • Can be recycled using XYBEX® equipment
  • Contains no solvents, borates, silicates, nitrites, or amines
  • Long bath life
  • Excellent compatibility with magnesium
  • Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Master STAGES™ CLEAN 2029 "One Step"

Parts Washing Fluid with Corrosion Inhibitor

Master STAGES™ CLEAN 2029 "One Step"

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Master STAGES™ CLEAN 2115

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115

Master STAGES™ CLEAN 2115 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces

  • Compatible with a wide range of materials including cast iron, steels, zinc, plastics, and composites
  • When washing aluminum parts above 100°F (40°C) consider using Master STAGES™ CLEAN 2115AL
  • Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115 applications are in the range of 3,000 PSI-10,000 PSI (200-600 kPa)
  • Provides excellent short-term corrosion inhibition on most common ferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Can be used on most aluminum alloys if kept under 100°F (40°C)
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2115AL

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (200 to 660 kPa)
  • Provides short term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2430

Near-neutral Washing Compound

Master STAGES™ CLEAN 2430

Master STAGES™ CLEAN 2430 is a highly-concentrated, mild pH, liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in high-pressure spray washers
  • CLEAN 2430 "splits" oils to the surface of the cleaner tank for easy skimming
  • Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
  • Provides long life between washer cleanouts

Master STAGES™ CLEAN IP 2019s

Silicated Low-foam Cleaner

Master STAGES™ CLEAN IP 2019s

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

  • An excellent cleaner and very economical to use
  • Compatible with aluminum, magnesium, cast iron, and steel alloys
  • Rejects oil for easy skimming or centrifuging to extend bath life
  • Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
  • Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition