Home

Home

Emulsion Cutting & Grinding Fluids

Emulsions are suspensions of oil droplets in water made possible by blending the oil with emulsifying and blending agents. An emulsion will have a milky appearance with an oil droplet size in the range 0.005mm (0.0002") to 0.002mm (0.00008"). They provide good cooling with moderate lubricity.

Number of products in category is 16

Dustin McCallum Speaks About TRIM® VHP® E814

TRIM SOL<sup>®</sup>

TRIM SOL® is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL® LC sf

General-purose Emulsion-Nonchlorinated, Siloxane Free

TRIM SOL<sup>®</sup> LC sf

TRIM SOL ® LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

  • For wide range job, applications from tough assignments such as gear hobbing and broaching to lighter duties like turning, TRIM SOL LC sf has proven equally effective
  • Does not contain any chlorinated EP additives
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL® nd

General-purpose Emulsion - No Dye

TRIM SOL<sup>®</sup> nd

TRIM SOL® nd is a no dye soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL® ndsf

General-purpose Emulsion - No Dye, Siloxane Free

TRIM SOL<sup>®</sup> ndsf

TRIM SOL® ndsf is a no dye, siloxane free soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL® sf

General-purpose Emulsion - Siloxane Free

TRIM SOL<sup>®</sup> sf

TRIM SOL® sf is a siloxane free soluble oil (emulsion) coolant concentrate which is the world standard general-purpose, multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Siloxane free
  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM<sup>®</sup> E206

TRIM® E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, production, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable and fine emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion — No Dye

TRIM<sup>®</sup> E206 nd

TRIM® E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, production, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable and fine emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM<sup>®</sup> E850

TRIM® E850 is a proprietary blend of new "green" vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.

  • Delivers unparalleled lubricity
  • Boron and halogen free
  • Very long sump life and low carryoff rates result in low operating cost
  • Low product odor
  • Mild operator contact properties
  • Provides superior results in a wide range of operations
  • Excellent corrosion resistance on both nonferrous and ferrous materials
  • Superior wetting and penetration to the point of cut
  • Soft fluid film protects ways, chucks, and tool holders
  • Product contains no chlorine, phenol, nitride, copper, or triazine
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • High performance without the use of chlorinated paraffins

TRIM® E906

Premium, Low-foaming Emulsion

TRIM<sup>®</sup> E906

TRIM® E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

  • Longer operational life than competitive fluids
  • Highly effective, extreme pressure additives control built-up edge
  • E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
  • Low odor for pleasant operating environment
  • Tight emulsion reduces carryoff and gets the fluid to the point of cut
  • In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives

TRIM® E917

Low-foam, High Lubricity Emulsion

TRIM<sup>®</sup> E917

TRIM® E917 is a low foam, high lubricity emulsion oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The very high levels of both chemical and mechanical lubricity in this product handle the toughest machining and grinding jobs. The stable and predictable performance of E917 makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Highly effective extreme pressure additives control built-up edge
  • E917 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
  • Tight emulsion reduces carryoff and gets the fluid to the point of cut
  • In high-speed turning and milling, E917 has the right balance of cooling and lubrication to provide great tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives

TRIM® E925

Chlorine-free High Performance Emulsion

TRIM<sup>®</sup> E925

TRIM® E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-tomachine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Boron and halogen free
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® VHP® E200PW

Very High-pressure, Pratt & Whitney Approved Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E200PW

TRIM® VHP® E200PW is a chemical emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials. This approval applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.

  • Pratt & Whitney (PMC 9390) approved for use in all grinding and machining operations on all metals. VHP E200PW contains a proven and highly effective, nonchlorinated, extreme-pressure additive to control built-up edge and wheel loading
  • No foam at very high pressures and volumes
  • Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® VHP® E210

Very High-pressure, Chlorine-free Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E210

TRIM® VHP® E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Requires no special disposal or recycling techniques

TRIM® VHP® E320

Very High-pressure, High-lubricity Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E320

TRIM® VHP® E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little to no foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Requires no special disposal or recycling techniques

TRIM® VHP® E812

Very High-pressure Chlorine-free Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E812

TRIM® VHP® E812 is a low- to no-foam, chlorine-free emulsion. It is ideally suited for those operations that utilize high-pressure, high-volume coolant. VHP E812 is a fluid that will allow you to get maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will assist in achieving the maximum productivity from creepfeed grinders as well. While VHP E812 is very stable and is both operator and environmentally "friendly", its greatest strength comes from its ability to help you get the job done. It is compatible with all metals and many nonmetallic materials as well. Even with a product as "gutsy" as VHP E812 it will run for extended periods of time without adds and will do so in a very clean manner. VHP E812 has a Pratt Whitney approval (PMC 9393).

  • A very versatile product that works well in a wide range of operations such as production, creepfeed grinding and milling, turning, drilling, and tapping
  • Proven performer in difficult creepfeed grinding operations
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Very low foam, without the use of conventional defoamers
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, nitrites, triazine, or phenolic compounds

TRIM® VHP® E814

Low foaming, Chlorine-free, Long-life Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E814

TRIM® VHP® E814 is a low- to no-foam, chlorine-free, long-life, soluble oil. This versatile emulsion performs well in most machining and grinding applications but excels in high-pressure environments where many fluids fail. VHP E814 allows you to realize the maximum productivity benefits from your high velocity, through-the-tool coolant delivery systems. The stable and predictable performance of VHP E814 makes it the first choice for high quality, consistent parts manufacturing.

  • Stable, low-foam formula extends useful life without need for tank side defoamer additions
  • Nonchlorinated, extreme-pressure (EP) additives control built-up edge
  • Delivers excellent material removal rates and finishes on applications as difficult as gun drilling
  • Proven performer in difficult creepfeed grinding operations
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, nitrites, or phenolic compounds
  • Forms stable emulsion in hard water environments