Home

Home

VHP® Product (Very High Pressure)

VHP® stands for "Very High Pressure" VHP fluid products are low- to no-foam and are ideally suited for those operations that utilize high-pressure, high-volume coolant.

Number of products in category is 5

Dustin McCallum Speaks About TRIM® VHP® E814

TRIM® VHP® E200PW

Very High-pressure, Pratt & Whitney Approved Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E200PW

TRIM® VHP® E200PW is a chemical emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials. This approval applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.

  • Pratt & Whitney (PMC 9390) approved for use in all grinding and machining operations on all metals. VHP E200PW contains a proven and highly effective, nonchlorinated, extreme-pressure additive to control built-up edge and wheel loading
  • No foam at very high pressures and volumes
  • Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® VHP® E210

Very High-pressure, Chlorine-free Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E210

TRIM® VHP® E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Requires no special disposal or recycling techniques

TRIM® VHP® E320

Very High-pressure, High-lubricity Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E320

TRIM® VHP® E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little to no foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Requires no special disposal or recycling techniques

TRIM® VHP® E812

Very High-pressure Chlorine-free Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E812

TRIM® VHP® E812 is a low- to no-foam, chlorine-free emulsion. It is ideally suited for those operations that utilize high-pressure, high-volume coolant. VHP E812 is a fluid that will allow you to get maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will assist in achieving the maximum productivity from creepfeed grinders as well. While VHP E812 is very stable and is both operator and environmentally "friendly", its greatest strength comes from its ability to help you get the job done. It is compatible with all metals and many nonmetallic materials as well. Even with a product as "gutsy" as VHP E812 it will run for extended periods of time without adds and will do so in a very clean manner. VHP E812 has a Pratt Whitney approval (PMC 9393).

  • A very versatile product that works well in a wide range of operations such as production, creepfeed grinding and milling, turning, drilling, and tapping
  • Proven performer in difficult creepfeed grinding operations
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Very low foam, without the use of conventional defoamers
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, nitrites, triazine, or phenolic compounds

TRIM® VHP® E814

Low foaming, Chlorine-free, Long-life Emulsion

TRIM<sup>®</sup> VHP<sup>®</sup> E814

TRIM® VHP® E814 is a low- to no-foam, chlorine-free, long-life, soluble oil. This versatile emulsion performs well in most machining and grinding applications but excels in high-pressure environments where many fluids fail. VHP E814 allows you to realize the maximum productivity benefits from your high velocity, through-the-tool coolant delivery systems. The stable and predictable performance of VHP E814 makes it the first choice for high quality, consistent parts manufacturing.

  • Stable, low-foam formula extends useful life without need for tank side defoamer additions
  • Nonchlorinated, extreme-pressure (EP) additives control built-up edge
  • Delivers excellent material removal rates and finishes on applications as difficult as gun drilling
  • Proven performer in difficult creepfeed grinding operations
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, nitrites, or phenolic compounds
  • Forms stable emulsion in hard water environments