Login
Home

Emulsions Cutting & Grinding Fluids

Geared up for production:

With superior lubricity and a higher oil content, TRIM® emulsions provide a greater boundary layer between the tool and the material. TRIM Emulsions are ideal for lower, less than 600 SFPM, applications such as broaching, reaming, deep hole drilling, drilling, tapping, and centerless grinding.

Emulsions work well for machining copper, yellow metals, steel alloys, cast aluminums, wrought aluminums, and tough-to-machine titanium and nickel-based alloys.

Number of products in category is 8

TRIM™ E709

Long-life Emulsion

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range, suitable for both grinding and machining
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Compatible with aluminum, steel alloys, cast iron, and yellow metals
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives


TRIM™ E709FF

Long-life Emulsion

TRIM E709FF is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E709FF makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Has a very wide application range allowing its effective use on cutting and grinding
  • Extremely hard water tolerance
  • Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
  • Provides good tool life and surface finishes
  • High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
  • Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
  • Coolant residue is easily removed with either water, working solution or aqueous cleaners
  • Good cleaning performance keeps machine tool very clean
  • Easy recycling or disposal with conventional techniques and equipment
  • Run effectively for long periods without the need for costly additives


TRIM™ E711

Copper Alloy Machining Fluid

TRIM E711 is a high quality soluble oil designed primarily for the machining and grinding of yellow metals and copper alloys.

  • Rejects tramp oil to extend sump life
  • Will not stain or darken brass or other yellow metal alloys
  • Easy recycling or disposal with conventional techniques and equipment
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Very stable formula provides long operational life with consistent performance
  • Will not form the sticky, water insoluble residues commonly seen when machining yellow metals
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Compatible with all ferrous and nonferrous materials but is specifically designed for "free machining" yellow metals
  • Provides sufficient mechanical lubricity to run well in older "Swiss" style machines as well as in modern high speed CNC machines


TRIM™ E738

Magnesium Machining Emulsion

TRIM E738 is a soluble oil or chemical emulsion coolant concentrate designed for magnesium alloy machining. It provides excellent performance for high-temperature aerospace alloy and cast magnesium alloy. TRIM E738 consists of micro-molecular particles that provide advantages such as low mist levels, good cleaning and wetting performance. It provides mechanical lubrication, and is safe and very popular with operators.

  • Extremely hard water tolerable
  • High alkalinity reservation and release capability
  • Very tight emulsion particle structure that provides excellent wetting and cooling
  • Can reach cutting areas even in very high-speed cutting situations
  • Leaves a fluid residue to keep machine tool very clean
  • Prevents hydrogen and magnesium salts
  • Easy recycling or disposal with conventional techniques and equipment
  • Contains a highly effective extreme-pressure (EP) additive to control built-up edge (BUE)


TRIM™ E860

Low-foam, High-lubricity Emulsion

TRIM™ E860 is a high-quality, chlorinated general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut


TRIM™ E860KS

Premium, General-purpose Emulsion

TRIM E860KS is a high quality, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range
  • Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives
  • Works very well in general machining where traditional soluble oil may not cool sufficiently


TRIM™ E925

Chlorine-free, High-performance Emulsion

TRIM™ E925

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating


TRIM™ E950

High Performance Machining Emulsion

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives