Login
Home


Individual Forming Solutions
Individual Forming Solutions

Stamping

Stamping oil for the textile industry etc, chlorine free
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellowish, clear Visual
Density at 68°F: 0.87 g/cm3 ASTM D 7042
Viscosity at 104°F: 50.0 mm2/s ASTM D 7042
Flash point: > 165 °F DIN EN ISO 2719
Copper corrosion: 1b DIN 51759-1
High performance evaporating stamping oil for aluminum, material thickness up to 8 mm
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Transparent Visual
Density at 68°F: 0.82 g/cm3 ASTM D 7042
Viscosity at 68°F: 4.9 cSt ASTM D 7042
Flash point: > 66 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests

Wire drawing

High performance oil for drawing of steel and stainless steel wires, contains chlorine
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow Visual
Density at 68°F: 1.45 g/cm3 ASTM D 7042
Viscosity at 104°F: 2335.0 mm2/s ASTM D 7042
Flash point: > 190 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests

Hydroforming

Fully synthetic product with very good material compatibility, water-miscible
Physical Properties Typical Data
Concentrate
Color Mineral oil content Viscosity at 68°F:
ASTM D 7042
Density at 68°F:
ASTM D 7042
Copper corrosion:
DIN 51759-1
Yellow Free 4.7 cSt 1.05 Not determined*
5% Solution
Color pH-value
(tap water)
Corrosion protection
DIN 51360-2
Refractometer factor (brix) Conductivity
(Deionized water)
Yellowish 9.6 5 % grade 0 2.2 Not determined
Characteristics
Mineral oil EP-additives Chlorine Boron Amines FAD
- - - + + +
*Discolorations of non-ferrous metals should be examined in preliminary tests

Tube drawing

High performance oil for drawing of steel and stainless steel wires, contains chlorine
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow Visual
Density at 68°F: 1.45 g/cm3 ASTM D 7042
Viscosity at 104°F: 2335.0 mm2/s ASTM D 7042
Flash point: > 190 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests
For copper and copper-iron alloys
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Clear Visual
Density at 68°F: 0.90 g/cm3 ASTM D 7042
Viscosity at 104°F: 2780.0 mm2/s ASTM D 7042
Flash point: > 160 °F DIN EN ISO 2719
Copper corrosion: 1a DIN 51759-1
Chlorine free pilger paste for stainless steel tubes
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Beige Visual
Density at 68°F: 1.20 g/cm3 ASTM D 7042
Viscosity at 104°F: Not measurable ASTM D 7042
Flash point: > 100 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown Visual
Density at 68°F: 1.03 g/cm3 ASTM D 7042
Viscosity at 104°F: Not measurable ASTM D 7042
Flash point: > 300 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests
For drawing of tubes with small diameters (e.g. for diesel injection lines)
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 68°F: 0.90 g/cm3 ASTM D 7042
Viscosity at 104°F: 90.0 mm2/s ASTM D 7042
Flash point: > 220 °F DIN EN ISO 2719
Copper corrosion: 1b DIN 51759-1
Drawing soap, for steel and galvanized steel, application at approximately 50°C
Physical Properties Typical Data
Parameter Typical results
Operating concentration 5 - 10 %
Operating temperature 75 - 90 °F
Retention time in soap bath 5 - 10 min
Drawing velocity Max. 100 m/min
Concentration (grease in piston) 6 - 7 % grease
Concentration (alkalinity in methanol) 0 - 2 ml
Fully synthetic tube welding medium for bright steel, boron free version of FW 7651
Physical Properties Typical Data
Concentrate
Color Mineral oil content Viscosity at 68°F:
ASTM D 7042
Density at 68°F:
ASTM D 7042
Copper corrosion:
DIN 51759-1
Yellow, clear Free 8.0 cSt 1.06 Not determined*
5% Solution
Color pH-value
(tap water)
Corrosion protection
DIN 51360-2
Refractometer factor (brix) Conductivity
(Deionized water)
Clear 9.4 5 % grade 0 2.3 1590 μS/cm
Characteristics
Mineral oil EP-additives Chlorine Boron Amines FAD
- + - - + +
*Discolorations of non-ferrous metals should be examined in preliminary tests

Bending

Evaporating forming oil e.g. for coiling steel tubes for heat exchangers
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow brown Visual
Density at 68°F: 0.84 g/cm3 ASTM D 7042
Viscosity at 68°F: 7.4 cSt ASTM D 7042
Flash point: > 61 °F DIN EN ISO 2719
Copper corrosion: Not determined* DIN 51759-1
*Discolorations of non-ferrous metals should be examined in preliminary tests

Straightening

Tube welding emulsion for bright and galvanised steel
Physical Properties Typical Data
Concentrate
Color Mineral oil content Viscosity at 68°F:
ASTM D 7042
Density at 68°F:
ASTM D 7042
Copper corrosion:
DIN 51759-1
Brown 30 % 186.0 cSt 0.98 Not determined*
5% Solution
Color pH-value
(tap water)
Corrosion protection
DIN 51360-2
Refractometer factor (brix) Conductivity
(Deionized water)
Whitish 9.2 5 % grade 0 1.0 1550 μS/cm
Characteristics
Mineral oil EP-additives Chlorine Boron Amines FAD
+ - - - - +
*Discolorations of non-ferrous metals should be examined in preliminary tests