Home
Login
Home

Emulsions Cutting & Grinding Fluids

Geared up for production:

With superior mechanical lubricity and a higher oil content, TRIM® emulsions provide a greater boundary layer between the tool and the material. Emulsions are ideal for lower, less than 600 SFPM, applications such as broaching, reaming, deep hole drilling, drilling, tapping, and centerless grinding.

Emulsions work well for machining copper, yellow metals, steel alloys, cast aluminums, wrought aluminums, and tough-to-machine titanium and nickel-based alloys.

Gear up with the TRIM emulsion designed to meet your production needs.

Number of products in category is 14

TRIM® E206

Long-life Emulsion

TRIM<sup>®</sup> E206

TRIM® E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment


TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range, suitable for both grinding and machining
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Compatible with aluminum, steel alloys, cast iron, and yellow metals
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives


TRIM® E709 nd

Low Maintenance, General Purpose Emulsion (No Dye)

Health and Safety
Data Sheet
Documents
Read More...

TRIM® E709 nd is high quality universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protection film on the work piece and machine parts to prevent corrosion on metal surface including the machine tool. The stable and predictable performance of TRIM E709 nd makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range, suitable for both grinding and machining
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, E709 nd has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® E709BX

High Lubricity, Long-life Emulsion

TRIM® E709BX is high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy-to-clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of E709BX makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance without the need for costly additives
  • Very wide application range, which is suitable for both grinding and machining
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, it has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Compatible with aluminum alloys, steel alloys, cast iron and yellow metals
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Coolant is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Works very well in general machining where traditional soluble oil may not cool sufficiently


TRIM® E709FF

Long-life Emulsion

Health and Safety
Data Sheet
Documents
Read More...

TRIM® E709FF is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E709FF makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Has a very wide application range allowing its effective use on cutting and grinding
  • Extremely hard water tolerance
  • Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
  • Provides good tool life and surface finishes
  • High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
  • Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
  • Coolant residue is easily removed with either water, working solution or aqueous cleaners
  • Good cleaning performance keeps machine tool very clean
  • Easy recycling or disposal with conventional techniques and equipment
  • Run effectively for long periods without the need for costly additives


TRIM® E712

Low Maintenance, General Purpose Emulsion

Health and Safety
Data Sheet
Documents
Read More...

TRIM® E712 is high quality universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protection film on the work piece and machine parts to prevent corrosion on metal surface including the machine tool. The stable and predictable performance of TRIM E712 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range. Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives. Easily recyclable and/or dispose with conventional recycling and/or disposal techniques


TRIM® E738

Magnesium Machining Emulsion

Health and Safety
Data Sheet
Documents
Read More...

TRIM® E738 is a revolutionary new cutting fluid for the machining of wrought and cast magnesium alloys. E737 is nitrite, triazine and phenol free and has extraordinary resistance to splitting of its emulsion.

  • E738 is a magnesium specific fluid that practically eliminates the hydrogen generation, residue, and splitting issues associated with machining magnesium-based alloys with water- based fluids
  • Low hydrogen generation means lower risk of fire than with other water based fluids or straight cutting oils
  • Extreme hard water tolerant reduces fluid usage and residues
  • Works very well on big chip operations on magnesium based alloys
  • Extremely tight emulsion for superior wetting, great cooling, and low carryoff
  • Prevents the formation of magnesium residues that present cleaning problems on both machines and parts
  • Cleaner chips for easier recycling or increased resale value
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Easily waste treated or disposed of using conventional techniques and equipment


TRIM® E860KS

Premium, General-purpose Emulsion

TRIM® E860KS is a high quality, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range
  • Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives
  • Works very well in general machining where traditional soluble oil may not cool sufficiently


TRIM® E860KS bd

Premium, General-purpose Emulsion - Blue Dye

TRIM® E860KS bd is a high quality, blue-dyed, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS bd makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range
  • Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives
  • Works very well in general machining where traditional soluble oil may not cool sufficiently


TRIM® E9010

Health and Safety
Data Sheet
Documents
Read More...

TRIM® E9010 is a soluble oil or chemical emulsion coolant concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.

  • Contain a proven and highly effective extreme-pressure (EP) additive to control built-up edge (BUE)
  • Has a very wide application range allowing its effective use on such diverse operations as production, surface and center-less grinding, heavy duty broaching, gear hobbing and replacing straight oil on some types of screw machines
  • Extremely stable fine particle size emulsion to reduce carry off and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a fluid oily, non-gummy residue to prevent sticky ways ,chucks, tool holders and fixtures
  • Coolant residue is easily removed with either water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment


TRIM® E905

High-lubricity, extreme pressure emulsion

TRIM® E905 is a high quality, high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. TRIM E905 has broad application in machining and grinding of a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of TRIM E905 makes it a first choice for high quality, consistent parts manufacturing.

  • A very universal product that works well in a wide range of operations
  • Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
  • Extremely hard water tolerant
  • Very low foam even at high pressures
  • Extremely fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Easily recycled or disposed of without special handling or equipment


TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM<sup>®</sup> E925

TRIM® E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating


TRIM® VHP™ E820

Cutting and Grinding FLuid Concentrate

Health and Safety
Data Sheet
Documents
Read More...

VHP™ E820 is an aerospace approved, low to no foam chlorine free soluble oil. It is ideally suited for those operations that utilize high-pressure, high-volume coolant. VHP E820 is a fluid that will allow you to get maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will assist in achieving maximum productivity from creep feed and VIPER grinders. While VHP E820 is very stable and operator "friendly", its greatest strength comes from its ability to help you get the job done. It is compatible will all metals and many non-metallic materials as well. Even with a product as "gutsy" as VHP E820 it will run for extended periods of time without additives and do so in a very clean manner.

  • A very versatile product that works well in a wide range of operations such as production, creep feed grinding and milling, turning, drilling, and tapping
  • Proven performer in difficult creep feed grinding operations
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Very low foam, without the use of conventional defoamers
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, boron, chlorine, nitrites, formaldehyde releasers, or phenolic compounds


TRIM® VXX

Extreme Lubricity Emulsion

TRIM® VXX is a soluble oil (chemical emulsion) coolant designed to do the heaviest duty machining operations. VXX is often used as a replacement for straight cutting and grinding oils. It contains very high levels of EP additives including stable chlorine and sulfur. Additional friction modifiers, including sulfurized fats and particle size modification technology, are used to reduce the mechanical friction seen in many heavy-duty machining and grinding operations.

  • Even with all these EP additives and friction modifiers, VXX will not stain “white and yellow” metals
  • Cools better than straight oil to allow higher metal removal rates without heat damage
  • Contains a proven and highly effective extreme pressure (EP) additive to control built-up edge and prevent wheel loading and packing
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment