Login
Home

TRIM® MicroSol® 690XT

高润滑、低泡沫的优质半合成加工液

TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT - 5 gallon Pail

TRIM® MicroSol® 690XT

TRIM® MicroSol® 690XT 是一种高润滑、半合成微乳型 冷却液。 与上一代半合成冷却液相比、该配方可延长贮槽寿命并提供更好的泡沫控制。它提供了优异的冷却和机械润滑能力、以及使用 TRIM® 冷却液所预期获得的机器友好特性。它在混合金属的情况下表现非常出色、并且与各种材料兼容、包括钛、高镍合金、钢、铜和铝合金。

  • 显著延长使用寿命、无需使用罐侧杀菌剂或杀菌剂
  • 不含硼和卤素
  • 低泡沫、适用于当今高压、大批量的应用需求
  • 兼容各种材料、包括钛、高镍合金、钢、铜和铝合金
  • 应用在高硅铝合金上的氯化可溶性油的优异替代品
  • 不含亚硝酸盐、三嗪、酚类、氯化或硫化的EP添加剂
  • 为所有黑色金属和有色金属提供卓越的缓蚀作用
  • 保持机器非常干净、同时留下柔软的液体膜、便于清洁和减少维护
  • 使用标准的金属加工回收和处理技术

TRIM® MicroSol® 690XT   
©2014-2020 马思特液体解决方案

Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT

Watch the video to find out what everyone at Hy-Speed Machining has to say about MicroSol 690XT! Michael Mills, General Manager, Cutting Inconel: "Tools lasted a lot longer, parts came out better." Mike Mills Jr., CNC Programmer, Cutting Inconel: "I went from twelve minutes a part to about four and a half minutes." Taylor Cooper, CNC Operator, "The coolant is tenfold to what we've been using" Weston InKrote, CNC Operator, "Tooling life went up, run time cut in half, finishes were great" Peter Duffy, Maintenance, "More profit for us"

2015-04-14, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=420.0

Download video >



Chuck Adams is Machining A Lot of Titanium with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "Our shop is starting to machine a lot of titanium products. In order to prevent micro fractures in the metal, we wanted a coolant that was nonchlorinated. With the MicroSol 690XT we achieved that purpose and also cut down on tap breaks. We were having a lot of tap wear and tap breaks trying to tap titanium. After putting in the 690XT the tapping is much better, lubricity is much higher, we’re having less failure, and our taps are lasting a lot longer!"

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=416.0

Download video >



Bradford Watts, "MicroSol® 690XT Runs at About Half the Concentration..."

Bradford Watts of Excel Manufacturing in Seymour, Indiana says, "MicroSol 690XT runs at about half the concentration level as our older style coolant. We have used less of the 690XT in the machines and that has saved us a lot of money. MicroSol 690XT keeps the tools as clean as the old product. MicroSol 690XT is probably the best coolant that we have had in my time here; and I have been here almost ten years."

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=419.0

Download video >



Chuck Adams Wants to Convert Whole Shop to MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "After trials with the MicroSol 690XT in three of the machines, we wanted to buy the product. Three to four weeks after cleaning the machines we were having better machining. The product was not available at the time of the trial, so we changed the rest of the shop over to 685XT, which we are currently running. As soon as 690XT goes into production, we are changing the entire shop over to 690XT."

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=418.0

Download video >



Curt Metcalf Solves Reaming Problem with MicroSol® 690XT

My name is Curt Metcalf and I work at Excel Manufacturing in Seymour, Indiana. We have been testing MicroSol 690XT for about three months now on two different machines with good success. We have tested aluminum, cast iron, and ductal iron. It solved a reaming problem we had on an aluminum machining operation and and gave us good tool life. The operators like it because of the low chemical smell and the parts come clean.

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=415.0

Download video >



Chuck Adams Tapping into Fluid Savings with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio noted, "Prior to using MicroSol 690XT we were using $150 to $200 every two weeks on tapping fluid aerosol cans on all the machines. Now that we are using the TRIM coolant we don’t use any other tapping product. It is now just straight coolant with no problems."

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=417.0

Download video >



Phil Smith Eliminates Tool Breaking Issues with MicroSol® 690XT

Phil Smith, Ace Manufacturing Company, Cincinnati, Ohio, states, "Since we have switched to using MicroSol 690XT coolant, it has eliminated all my rust issues, all of my tapping and tooling breakage issues, all the odor issues, and all of the foaming issues. MicroSol 690XT has been a great coolant."

2014-12-05, 美式英语

To share this video, copy this URL: https://2trim.us/v/?v=414.0

Download video >