Login
Home

cutting.svg
M
cutting
Number of products: 21
Application: cutting
Metal: stainless steels [M]

TRIM® C270

High-performance Synthetic

TRIM<sup>®</sup> C270

This product has Rolls Royce Approval CSS 130

TRIM® C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odour which dissipates further after one or two days


TRIM® C350

Premium Synthetic Metalworking Fluid

TRIM<sup>®</sup> C350

TRIM® C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost


WEDOLiT CN 3370-21

High performance cutting oil

WEDOLiT CN 3370-21 is a low viscous, high performance cutting oil based on the latest gas to liquid (GTL) technology. The product is suitable for deep hole drilling of steel, stainless steel and aluminium. The product is also suitable for general cutting operations as well as for gear hobbing.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additiviation for deep hole drilling
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners


WEDOLiT CN 5370-12

High-performance cutting oil

WEDOLiT CN 5370-12 is a low viscous, non-water soluble high performance cutting oil based on the latest GTL-baseoil-technology, which was developed for thread cutting operations. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminium and non-ferrous metals.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additivation for thread cutting operations
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners


WEDOLiT CN 5370-22

High-performance cutting oil

WEDOLiT CN 5370-22 is a low viscous, non-water soluble, high performance cutting oil for thread cutting operations, which is based on the latest base-oil-technology. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminium and non-ferrous metals.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additivation for thread cutting operations
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a long tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners


WEDOLiT CS 6201

Water-miscible, fully synthetic coolant

WEDOLiT CS 6201 is suitable for grinding of steel, cast iron, aluminium, non-ferrous metals, glass and especially carbides.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers good skin compatibility


WEDOLiT CS 6206

Water-miscible, fully synthetic coolant

WEDOLiT CS 6206 is suitable for grinding of steel, cast iron, aluminium, non-ferrous metals, glass and especially carbides.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility


  • Recommended mixing ratio
  • Grinding:  from 4%
  • General cutting:  from 6%


WEDOLiT CW 6336

Water-miscible, conventional coolant

WEDOLiT CW 6336 is suitable for grinding as well as light to heavy cutting operations of steel, cast iron, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), and non-ferrous metals*.

WEDOLiT CW 6336 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for the aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 5°dH)
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT CW 6506

Water-miscible, conventional coolant

WEDOLiT CW 6506 is suitable for light to heavy cutting operations of steel, stainless steel, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), titanium and non-ferrous metals*.

WEDOLiT CW 6506 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for the aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT CW 8006

Water-miscible, semi synthetic coolant

WEDOLiT CW 8006 is suitable for light to heavy cutting operations of steel, stainless steel, cast iron and aluminium.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility


WEDOLiT CW 9006-CM

Water-miscible, semi synthetic coolant

WEDOLiT CW 9006-CM is suitable for grinding as well as light to medium cutting operations of steel, stainless steel and cast iron.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 10°dH)
  • Almost free of foam
  • Offers a good skin compatibility


TRIM<sup>®</sup> E850

TRIM® E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers exceptional lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® E923

Cutting and Grinding Fluid Concentrate

TRIM<sup>®</sup> E923

TRIM® E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine free extreme pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations whilst still providing the excellent non-cutting characteristics normally associated with traditional, high quality emulsions from Master Fluid Solutions. The optimised lubricity and extreme pressure package matches heavy duty neat oils on difficult to machine materials such as inconel, titanium, stainless steel and high tensile strength steels.

  • Delivers exceptional lubricity and EP performance
  • Has the necessary performance to replace neat oils in certain applications
  • Very long sump life
  • Low foam even in soft water areas
  • Hard water tolerant
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® E950

High Performance Machining Emulsion

TRIM® E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM<sup>®</sup> MicroSol<sup>®</sup> 585XT

TRIM® MicroSol® 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM® coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols and chlorinated or sulfurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT


TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM<sup>®</sup> MicroSol<sup>®</sup> 590XT

TRIM® MicroSol® 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to milky soluble oils on high-silica aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol® 590XT


TRIM® OE315 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE315 NS

TRIM® OE315 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE322 NS

Ester Based Neat Cutting Oil

TRIM<sup>®</sup> OE322 NS

TRIM® OE322 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE330 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE330 NS

TRIM® OE330 NS is a very heavy-duty neat cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion resistant steel alloys. TRIM OE330 NS is especially effective in slow speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high odour neat oils used in Sunnen honing machines.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE335

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE335

TRIM® OE335 is a heavy-duty neat cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximise tool life in operations such as gear hobbing.

  • Extremely high lubricity ensures fantastic tool life
  • Readily biodegradable
  • Ester based formulation ensures very low misting potential
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® TAP NC

Nonchlorinated Tapping Fluid

TRIM<sup>®</sup> TAP NC

TRIM® TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

  • Especially for taps up to 25mm diameter
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Compatible with most TRIM® fluids
  • Use for added lubricity on extremely tough jobs