Home

Home

Neat Oil Cutting & Grinding Fluids

Neatly to the point-of-cut:

TRIM® neat oils, used "neat" without dilution of water, provide maximum lubricity. Typically used for operations such as sliding head machines, honing, grinding very difficult to machine materials, and gun drilling.

Depending on the specific product, some TRIM neat oils are a high-end blend of various base oils, while others contain extreme pressure additives to control built-up edge and prolong tool life.

Get neatly to the cut with TRIM neat oils.

Number of products in category is 8

TRIM® ML55B

Minimal Quantity Lubrication Fluid

TRIM® ML55B is a high-performance, vegetable-ester-based, micro-lubrication fluid. It is fully compatible with all "micro lube" and micro-mist systems. TRIM ML55B contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction. TRIM ML55B out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, TRIM ML55B may be manually applied to the tool or the work piece.

  • Out-performs the more expensive products
  • Environmentally friendly, renewable resource based
  • Very low mist
  • Promotes superior finish and tool life and is compatible with all materials
  • Very high levels of lubricity with even minimum quantities of material at the point of cut for high material removal rates
  • Has been extensively tested and proven in all major brands of micro lube applicators


TRIM® OD316

Heavy-duty Gun Drilling Oil

TRIM® OD316 is a highly formulated, semi-synthetic neat cutting oil designed for use in gun drilling applications. TRIM OD316 has the necessary blend of EP additives and esters to maximize tool life as well as the correct viscosity and washability to flush the chips away from the cutting zone. The product is primarily designed for use on steel alloys and exotic aerospace alloys, however, it is also safe for use on aluminium, cast iron, copper, brass and bronze. TRIM OD316 has proven itself in difficult operations on stainless steels and corrosion resistant aerospace alloys.

  • A light coloured product which is very clean running
  • Low foaming and low misting for use in aggressive operations
  • High flash point
  • Oxidation inhibited for longer life
  • Excellent tool life properties
  • An outstanding product in gun drilling
  • Low odour


TRIM® OE220 NS

Vegetable Ester Based Cutting Oil

TRIM® OE220 NS is a cost effective, medium-duty neat cutting oil formulated using renewable vegetable esters, for use in machining operations of steel alloys, aluminium and yellow metals. TRIM OE220 NS is especially effective in modern lathe machines equipped with high pressure chip-breaker technology.

  • Extremely high lubricity ensures fantastic tool life
  • Chlorine and sulphur free
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE310 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE310 NS

TRIM® OE310 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE315 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE315 NS

TRIM® OE315 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE322 NS

Ester Based Neat Cutting Oil

TRIM<sup>®</sup> OE322 NS

TRIM® OE322 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE330 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE330 NS

TRIM® OE330 NS is a very heavy-duty neat cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion resistant steel alloys. TRIM OE330 NS is especially effective in slow speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high odour neat oils used in Sunnen honing machines.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance


TRIM® OE335

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE335

TRIM® OE335 is a heavy-duty neat cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximise tool life in operations such as gear hobbing.

  • Extremely high lubricity ensures fantastic tool life
  • Readily biodegradable
  • Ester based formulation ensures very low misting potential
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light colour and low odour for good operator acceptance