Home

Home

Synthetics Cutting & Grinding Fluids

Peak your performance:

TRIM® clean-running synthetics contain little to no oil. The more lubricious synthetics contain extreme-pressure additives, or wetting agents, for increased cooling capability. Hard-water tolerant and with good corrosion protection, synthetics leave very low residue for easy cleaning. And with extremely low carryoff, synthetics translate to lower operational costs.

Synthetics are an excellent choice for running steel and cast iron, copper alloys, plastics, and composites in high-speed turning and mini-grinding operations.

Run clean and long with TRIM synthetics.

Number of products in category is 9

Three Steps to Extend Your Coolant Life

TRIM® 229

Straight Chemical Concentrate

TRIM<sup>®</sup> 229

TRIM® 229 is a synthetic coolant concentrate. It delivers maximum chemical rust protection on ferrous materials with no residual film and at the lowest possible cost. 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut off machines, and water jet cutting systems.

  • Highly concentrated for very low-cost working solutions
  • Will keep grinding wheels clean and the work piece cool
  • Rapidly settles fines
  • Nonfoaming, low mist and low odor working solutions
  • Very low residue for easy cleaning
  • Good ferrous corrosion inhibition without an oily film
  • Rejects tramp oil for easy skimming and cleaning
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C116

Low-foam synthetic

TRIM® C116 is a high-performance synthetic fluid for working cast iron and mild steels. State-of the-art technologies provide excellent cooling and chip settling, very low foam, good tramp oil rejection and machine cleanliness while leaving a protective film on the machine tool.

  • Compatible with a very wide range of materials including cast iron, steels, plastics and composites; and provides excellent corrosion inhibition on ferrous alloys.
  • Boron and formaldehyde donor free.
  • Excellent biostability.
  • Extremely low carry off for very low total operation costs.
  • Very low foam and mist.
  • Low chemical odour.
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools.
  • Very good tramp oil rejection.

TRIM® C120 CG

Carbide Grinding Synthetic Fluid

TRIM® C120 CG is formulated specifically for the carbide grinding industry. This synthetic product is intended for grinding carbide, but is equally good on ceramics, cermets, chill cast alloys and tool steels. TRIM C120 CG minimises cobalt leaching while still maintaining superior cutting and non-cutting characteristics.

  • Keeps super-abrasive wheels clean.
  • Does not attack wheel bonding systems.
  • Designed to carry grinding swarf to the filter but will release swarf in properly designed settling tanks.
  • Will not be stripped out by conventional filtration systems.
  • Is low foaming.
  • Rejects tramp oil.
  • Resists oxidation and varnishing.
  • Has superior sump life.
  • Resists cobalt leaching for improved operator safety, stronger parts and cleaner machines.
  • Very low carryoff for extremely low fluid operating costs.
  • Easy recycling or disposal with conventional techniques and equipment.

TRIM® C270

High Performance Synthetic

TRIM<sup>®</sup> C270

This product has Rolls Royce Approval CSS 130

TRIM® C270 is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM® C270 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM® C270 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes

  • Very stable formula provides long operational life with consistent performance.
  • Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE).
  • Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
  • Extremely low foam in mineral free water.
  • Excellent tramp oil rejection.
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
  • Easy recycling or disposal with conventional techniques and equipment.
  • Contains no DEA, chlorine, nitrites or phenolic compounds

TRIM® C272

Cutting and Grinding Fluid Concentrate

TRIM® C272 is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM C272 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C272 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes

  • Very stable formula provides long operational life with consistent performance.
  • Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE).
  • Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
  • Extremely low foam in mineral free water.
  • Excellent tramp oil rejection.
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
  • Easy recycling or disposal with conventional techniques and equipment.
  • Contains no DEA, boron, chlorine, formaldehyde donors, nitrites or phenolic compounds

TRIM® C276

Clean-running Synthetic

TRIM<sup>®</sup> C276

TRIM® C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® C276WP

Cutting and Grinding Fluid Concentrate

TRIM® C276 WP is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM® C276 WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM® C276 WP is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes.

  • Very stable formula provides long operational life with consistent performance.
  • Chlorine and sulphur free extreme pressure (EP)additives control built-up edge (BUE).
  • Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
  • Extremely low foam in mineral free water.
  • Excellent tramp oil rejection.
  • Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
  • Easy recycling or disposal with conventional techniques and equipment.
  • Contains no DEA, chlorine, nitrites, formaldehyde donors or phenolic compounds

TRIM® C350

Premium Synthetic Metalworking Fluid

TRIM<sup>®</sup> C350

TRIM® C350 is a synthetic or chemical coolant optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

TRIM® C360

Cutting and Grinding Fluid Concentrate

TRIM® C360 is a very low foam, high lubricity, high EP synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. TRIM C360 has been formulated especially for applications where maximum performance is required in machines which both machine and grind hard aerospace alloys in the same cycle. Due to its synthetic formula, TRIM C360 has exceptional tramp oil rejecting properties and is highly filterable through even the finest of filtration devices. This, coupled to a superb antimicrobial package, ensures prolonged sump life even in the harshest of machine shop environments.

  • A very versatile product that works well in a wide range of operations such as grinding, milling, turning, drilling, and tapping.
  • Excellent extreme pressure performance without chlorine or sulphur additives.
  • Keeps machines extremely clean whilst leaving a soft fluid film that protects metal surfaces.
  • Water like working solution ensures low carry-off for low total operating cost.
  • Keeps grinding wheels clean for higher feed rates, better surface integrity and faster stock removal.
  • Highly filterable even through sub 10μm filters.
  • Exceptional sump life.
  • Exceptional tramp oil rejection.
  • Coolant is easily removed with water or aqueous cleaners.
  • Contains no secondary amines, mineral oil, chlorine, sulphur, boron, formaldehyde donors, nitrites or phenolic compounds.