Login
Home


The Future of Corrosion Protection
The Future of Corrosion Protection

Straightening oils with high corrosion protection

Ideal for long-term corrosion protection of dry workpieces, suitable for light forming operations
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.83 g/cm3 ASTM D 7042
Viscosity at 20°C: 4.5 mm2/s ASTM D 7042
Flash point: > 40 °C DIN EN ISO 2719
Film weight: 3.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: None Internal test method
Water separation: 11 min Internal test method
Humidity test: 120 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 70 h DIN EN ISO 9227 NSS
Ideal for mid-term corrosion protection of dry workpieces, suitable for light forming operations
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.84 g/cm3 ASTM D 7042
Viscosity at 20°C: 6.5 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 2.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: None Internal test method
Water separation: 12 min Internal test method
Humidity test: 100 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 40 h DIN EN ISO 9227 NSS
Ideal for short to mid-term corrosion protection of dry workpieces, suitable for light forming operations, also available as a VOC free version (AS 9921-81)
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.85 g/cm3 ASTM D 7042
Viscosity at 20°C: 8.6 mm2/s ASTM D 7042
Flash point: > 80 °C DIN EN ISO 2719
Film weight: 1.7 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: None Internal test method
Water separation: 17 min Internal test method
Humidity test: 85 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 35 h DIN EN ISO 9227 NSS
Ideal for short-term corrosion protection of dry workpieces, suitable for light forming operations, VOC free
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.85 g/cm3 ASTM D 7042
Viscosity at 20°C: 10.5 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: 1.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: None Internal test method
Water separation: 18 min Internal test method
Humidity test: 60 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 24 h DIN EN ISO 9227 NSS

Corrosion protection for overseas transportation with dewatering effect

Good universal corrosion protection for short to mid-term storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Lightly brown, clear Visual
Density at 15°C: 0.79 g/cm3 ASTM D 7042
Viscosity at 20°C: 1.6 mm2/s ASTM D 7042
Flash point: > 40 °C DIN EN ISO 2719
Film weight: 0.5 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 7 min Internal test method
Humidity test: 20 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 8 h DIN EN ISO 9227 NSS
Good universal corrosion protection for mid-term storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.80 g/cm3 ASTM D 7042
Viscosity at 20°C: 1.9 mm2/s ASTM D 7042
Flash point: > 40 °C DIN EN ISO 2719
Film weight: 1.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 90 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 24 h DIN EN ISO 9227 NSS
Outstanding universal corrosion protection for long-term overseas transportation
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 15°C: 0.81 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.2 mm2/s ASTM D 7042
Flash point: > 40 °C DIN EN ISO 2719
Film weight: 1.4 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 8 min Internal test method
Humidity test: 150 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 60 h DIN EN ISO 9227 NSS
Maximum performance for all requirements (indoor storage and overseas transportation)
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.82 g/cm3 ASTM D 7042
Viscosity at 20°C: 3.2 mm2/s ASTM D 7042
Flash point: > 45 °C DIN EN ISO 2719
Film weight: 2.4 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 19 min Internal test method
Humidity test: 180 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 80 h DIN EN ISO 9227 NSS
Thin film wax corrosion protection, no influence on subsequent processes, for mid-term storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.81 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.3 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 0.5 g/m2 Dipping procedure
Film type: Microwax Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 90 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 24 h DIN EN ISO 9227 NSS
Corrosion protection with an outstanding performance, for overseas long-term transportation
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.82 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.8 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 1.4 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 9 min Internal test method
Humidity test: 120 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 48 h DIN EN ISO 9227 NSS
Maximum performance for all requirements (indoor storage and overseas transportation)
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.83 g/cm3 ASTM D 7042
Viscosity at 20°C: 4.1 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 2.4 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 23 min Internal test method
Humidity test: 150 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 80 h DIN EN ISO 9227 NSS
VOC free for short-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.84 g/cm3 ASTM D 7042
Viscosity at 20°C: 11.2 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: 1.3 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 16 min Internal test method
Humidity test: 40 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 6 h DIN EN ISO 9227 NSS
VOC free for short-term corrosion protection, for easy handling of parts
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.82 g/cm3 ASTM D 7042
Viscosity at 20°C: 5.3 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: 0.7 g/m2 Dipping procedure
Film type: Vaseline Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 7 min Internal test method
Humidity test: 30 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 8 h DIN EN ISO 9227 NSS
VOC free for long-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.83 g/cm3 ASTM D 7042
Viscosity at 20°C: 5.4 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: 1.5 g/m2 Dipping procedure
Film type: Micro wax Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 25 min Internal test method
Humidity test: 100 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 50 h DIN EN ISO 9227 NSS
VOC free for short-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow-medium-brown, clear Visual
Density at 15°C: 0.86 g/cm3 ASTM D 7042
Viscosity at 20°C: 13.8 mm2/s ASTM D 7042
Flash point: > 120 °C DIN EN ISO 2719
Film weight: 1.5 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 17 min Internal test method
Humidity test: 50 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 2 h DIN EN ISO 9227 NSS
VOC free for mid-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow-medium-brown, clear Visual
Density at 15°C: 0.86 g/cm3 ASTM D 7042
Viscosity at 20°C: 21.5 mm2/s ASTM D 7042
Flash point: > 130 °C DIN EN ISO 2719
Film weight: 2.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 20 min Internal test method
Humidity test: 70 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 12 h DIN EN ISO 9227 NSS

High performance dewatering fluids

Very fast dewatering, offers short-term corrosion protection, lower flash point
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 15°C: 0.79 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.2 mm2/s ASTM D 7042
Flash point: > 40 °C DIN EN ISO 2719
Film weight: 0.3 g/m2 Dipping procedure
Film type: Very slightly oily Haptical
Dewatering effect: ≤ 5 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 10 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS
Very fast dewatering, offers short-term corrosion protection, higher flash point
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 15°C: 0.80 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.8 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 0.3 g/m2 Dipping procedure
Film type: Very slightly oily Haptical
Dewatering effect: ≤ 5 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 7 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS
Fast dewatering, offers mid-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 15°C: 0.80 g/cm3 ASTM D 7042
Viscosity at 20°C: 2.8 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 1.0 g/m2 Dipping procedure
Film type: Vaseline Haptical
Dewatering effect: ≤ 10 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 30 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS
Very fast dewatering, offers short-term corrosion protection, VOC free version
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 15°C: 0.81 g/cm3 ASTM D 7042
Viscosity at 20°C: 4.1 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: 0.3 g/m2 Dipping procedure
Film type: Very slightly oily Haptical
Dewatering effect: ≤ 5 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 7 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS

Wax based products

Waxy high performance product, potentially for outdoor storage, very quick drying time
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: White-beige, cloudy Visual
Density at 15°C: 0.79 g/cm3 ASTM D 7042
Viscosity at 20°C: 17.0 mm2/s ASTM D 7042
Flash point: > 26 °C DIN EN ISO 2719
Film weight: 10.0 g/m2 Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 720 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 200 h DIN EN ISO 9227 NSS
Thick, waxy high performance product, potentially for outdoor storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Black, cloudy Visual
Density at 15°C: 0.81 g/cm3 ASTM D 7042
Viscosity at 20°C: 74.0 mm2/s ASTM D 7042
Flash point: > 38 °C DIN EN ISO 2719
Film weight: 28.0 g/m2 Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 1500 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 220 h DIN EN ISO 9227 NSS
Thick waxy high performance product, higher flash point, potentially for outdoor storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Black, cloudy Visual
Density at 15°C: 0.87 g/cm3 ASTM D 7042
Viscosity at 20°C: 80.0 mm2/s ASTM D 7042
Flash point: > 50 °C DIN EN ISO 2719
Film weight: 22.0 g/m2 Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 450 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 100 h DIN EN ISO 9227 NSS
Waxy high performance product, potentially for outdoor storage, higher flash point and thinner film
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: White-beige, cloudy Visual
Density at 15°C: 0.80 g/cm3 ASTM D 7042
Viscosity at 20°C: 19.0 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 7.0 g/m2 Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 450 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 100 h DIN EN ISO 9227 NSS
Very high protection product, no negative labelling, VOC free, potentially for outdoor storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, turbid, pasty Visual
Density at 15°C: 0.90 g/cm3 ASTM D 7042
Viscosity at 20°C: Not measurable ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
Film weight: Depending on the application Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 1800 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 35 h DIN EN ISO 9227 NSS

Special products

Application at surface temperatures up to 80 °C, GTL-oil, VOC free, no negative labelling
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, turbid-clear Visual
Density at 15°C: 0.83 g/cm3 ASTM D 7042
Viscosity at 20°C: 20.5 mm2/s ASTM D 7042
Flash point: > 160 °C DIN EN ISO 2719
Film weight: 1.7 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 70 s Internal test method
Water separation: None Internal test method
Humidity test: 70 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 12 h DIN EN ISO 9227 NSS

New generation ester-based corrosion protection

Ester-based dewatering fluid, no negative labelling, mineral oil free
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Light yellow, clear Visual
Density at 15°C: 0.86 g/cm3 ASTM D 7042
Viscosity at 20°C: 11.2 mm2/s ASTM D 7042
Flash point: > 160 °C DIN EN ISO 2719
Film weight: 0.5 g/m2 Dipping procedure
Film type: Slightly oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 12 min Internal test method
Humidity test: 14 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS
Ester-based corrrosion protection, no negative labelling, mineral oil free
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow, clear Visual
Density at 15°C: 0.87 g/cm3 ASTM D 7042
Viscosity at 20°C: 13.6 mm2/s ASTM D 7042
Flash point: > 160 °C DIN EN ISO 2719
Film weight: 0.5 g/m2 Dipping procedure
Film type: Slightly oily Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 30 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 8 h DIN EN ISO 9227 NSS

Multi-purpose oils

Multi-purpose oil, without forming properties
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.82 g/cm3 ASTM D 7042
Viscosity at 20°C: 3.5 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 0.7 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 60 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 40 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 8 h DIN EN ISO 9227 NSS
Multi-purpose oil, with forming properties, also available in aerosol cans (WEDOLiT KS 3000)
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 15°C: 0.83 g/cm3 ASTM D 7042
Viscosity at 20°C: 4.4 mm2/s ASTM D 7042
Flash point: > 60 °C DIN EN ISO 2719
Film weight: 1.8 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 60 s Internal test method
Water separation: 5 min Internal test method
Humidity test: 70 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 8 h DIN EN ISO 9227 NSS

Water-miscible corrosion protection

Water-miscible parts cleaner, very good corrosion protection, application at approximately 60°C, for steel and non-ferrous metals
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Dark brown, clear-slightly turbid Visual
Density at 15°C: 0.91 g/cm3 ASTM D 7042
Viscosity at 40°C: 44.0 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
pH-value [20%; 70°C]: 9.8 DIN EN ISO 10523
Conductivity [20%; 70°C]: 1850 µS/cm DIN EN 27888
Corrosion protection properties
Concentration: 10% 20% 100% Tested according to
Film weight: 1.8 g/m2 4.7 g/m2 5.2 g/m2 Dipping procedure
Humidity test: > 1 d > 2 d > 4 d DIN EN ISO 6270-2 AHT
Salt spray performance: < 2 h < 16 h > 24 h DIN EN ISO 9227 NSS
Water-miscible parts cleaner, application at approximately 60°C, for steel and non-ferrous metals, Rattunde approval
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Dark brown, clear-slightly turbid Visual
Density at 15°C: 0.97 g/cm3 ASTM D 7042
Viscosity at 40°C: 108.0 mm2/s ASTM D 7042
Flash point: > 100 °C DIN EN ISO 2719
pH-value [20%; 70°C]: 9.6 DIN EN ISO 10523
Conductivity [20%; 70°C]: 4500 µS/cm DIN EN 27888
Corrosion protection properties
Concentration: 10% 20% 100% Tested according to
Film weight: 0.8 g/m2 1.2 g/m2 5.2 g/m2 Dipping procedure
Humidity test: > 1 d > 2 d > 4 d DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h < 1 h > 1 h DIN EN ISO 9227 NSS