Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

Semisynthetics Cutting & Grinding Fluids

Cutting edge solutions:

TRIM® semisynthetics offer the cooling and lubricity of a synthetic without the higher oil content of an emulsion. Designed to operate at higher SFPM, semisynthetics perform well on many operations including face milling, cut-off turning, grinding, tapping, and drilling — depending on the specific product.

Semisynthetics are compatible with alloy steels, tool steels, cast irons, and copper alloys, as well as plastics and composites. With less carryoff, semisynthetics use less material — it all adds up to lower costs.

Number of products in category is 10

TRIM™ MicroSol™ 455

Low-foam Ferrous Semisynthetic

TRIM™ MicroSol™ 455

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminum alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

TRIM™ MicroSol™ 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM™ MicroSol™ 585XT

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM™ MicroSol™ 590XT

Advanced Technology Aerospace Semisynthetic

TRIM™ MicroSol™ 590XT

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM™ MicroSol™ 687NXT

Premium High-lube PRTR Microemulsion

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Low foaming for modern high-pressure, high-volume applications
  • Uses standard metalworking recycling and disposal techniques
  • Does not contain any chemical listed under Japan PRTR regulation
  • Provides superior corrosion inhibition on all ferrous metals

TRIM™ MicroSol™ 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM™ MicroSol™ 690XT

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM™ MicroSol™ 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM™ MicroSol™ 692XT

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM™ SC310

Microemulsion Semisynthetic

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Extremely effective EP additive package
  • Contains no nitrites, heavy metals, phenolic compounds
  • Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC310 nd

Microemulsion Semisynthetic - No Dye

TRIM™ SC310 nd is a no dye, high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 nd is well-suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Extremely effective EP additive package
  • Contains no nitrites, heavy metals, phenolic compounds
  • Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC410

Chlorine-free Semisynthetic Coolant

TRIM™ SC410

5 drum minimum batch order size. Pricing and delivery available upon request.

TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

  • Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
  • Low foaming in most operations
  • Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
  • Will provide superior sump life and corrosion inhibition for long periods of time without adds
  • Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
  • Will keep the machine and work environment clean even when machining or grinding gray iron
  • Contains no chlorine or sulfur-based additives
  • Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
  • Very low carryoff and long sump life, delivering low operating costs
  • Hard water tolerant up to 30 grains

TRIM™ SC9030SGM

Cutting and Grinding Fluid Concentrate

TRIM™ SC9030SGM is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC9030SGM is well suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composite
  • Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials and eliminates the “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
  • Has exceptional sump life and very low makeup for extremely low, total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Easy recycling or disposal with conventional techniques and equipment