Login
Home

Anti Corrosion - Neat Fluids

Number of products in category is 5

WEDOLiT AN 6723

Special-Fluid 100°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN 6723 is a thixotropic corrosion protection oil for steel. It contains a combination of inhibitors which offers long-term protection for indoor storage and short-term protection for outdoor storage. It can be applied by spraying, flooding, brushing or rolling.
WEDOLiT AN 6723 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Ideal for overseas transport
  • Stable against acidic and alkaline impurities
  • Good material compatibility
  • The full corrosion protection develops, if the product is applied at temperatures of 50 - 60°C (for spraying: The temperature has to be adapted according to the specifications of the used device)
  • For an optimal protection of the treated parts, storage temperatures ≥ 36°C and a direct exposure to solar radiation should be avoided


WEDOLiT AN 7114

High-Protection-DW-Fluid 120°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN-7114 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding or by means of rollers.

WEDOLiT AN-7114 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Ideal compatibility with VCI-foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behaviour
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Low


WEDOLiT AN 7324

Special-Fluid 100°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN 7324 is a leading edge corrosion inhibitor for steel and other metals. It can be applied by spraying, flooding, brushing or rolling on parts with surface temperatures ≤ 80°C. This results in time savings and enhances productivity.

WEDOLiT AN 7324 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Parts with surface temperatures ≤ 80°C can be treated without odor formation or a loss in performance
  • Suitable for VCI foils
  • Stable against acidic and alkaline impurities
  • Good material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Water displacing with a very good wetting behavior


WEDOLiT K 118

Lanolin-Protection-Fluid 100°C flash point
(aromatic content ≤ 2%)

WEDOLiT K 118 is a modern formulated corrosion inhibitor for steel and other metals, which develops a slightly greasy film. The resulting film consists of natural corrosion protection additives with a specific odor. It offers a long-term corrosion protection (indoor storage) and can be applied by spraying, flooding, or rolling. A homogenisation before usage is recommended.

Fulfills all requirements regarding Altautorichtlinie 2000/53/EG. Not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) as well as to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Ideal for VCI-foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Ideal for covered storage
  • Offers protection against atmospheric contamination, e.g. dissolved gases which cannot penetrate the protecting film (water vapor permeability)


WEDOLiT K 721

Anti-corrosive agent

WEDOLiT K 721 is an anti-corrosive protective medium of low viscosity for steel. It contains an inhibitor combination attuned to affording temporary protection from corrosion. When the solvent has evaporated a thin film of oil impervious to age forms on the treated surface which grants protection under covered storage facilities for several months and even allows a short period of exposure to weather in the open when, for example, goods are being transported from one factory location to another. This film can be easily removed even after a long period with the aid of organic solvents or water-soluble industrial detergents. As complete anti-corrosion protection however is not afforded until the solvent-free film has formed, a period of storage lasting some 24 hours should be observed for evaporation before packaging the freshly oiled material in cases with oiled paper or foil inserts.

WEDOLiT K 721 is adjusted to give temporary corrosion protection to bright-drawn steel. In addition it is also suitable for the after-treatment of phosphatised parts to the extent that these are immersed in the oil free of water.

WEDOLiT K 721 meets, after the evaporation of the solvent, all the requirements demanded by VDA 230- 201.

WEDOLiT K 721 is the preferred medium for immersion baths in treating hollow bodies (pipe and tube, for example) at ambient temperatures because of its low viscosity. It can also be applied by spraying, flow coating or by means of rollers.

WEDOLiT K 721 contains a solvent based mineral oil for adjusting viscosity with a flash point above 60°C.