Login
Home

Coolant - Neat Cutting Oil Fluids

Number of products in category is 6

WEDOLiT CN 2370-7

High Performance Grinding Oil

WEDOLiT CN 2370-7 is a low viscous, high performance grinding oil, which is based on the latest GTL (gas-to-liquid) technology. It is suitable for the machining of HSS and carbide steel, (especially with a high cobalt content) with CBN and diamond grinding wheels.

  • High inhibitor content
  • High performance due to a special combination of EP / AW additives
  • Excellent lubricity, which results in high surface quality and a prolonged tool life
  • The oil film offers a high load carrying capacity
  • Good wettability and flushing properties
  • Low mist generation
  • Reduced oil consumption


WEDOLiT CN 2610-18

Straight cutting oil

WEDOLiT CN 2610-18 3 is a non-water soluble high performance cutting and grinding oil of low viscosity. Highly alloyed steel grades and cast iron, non-ferrous metals and aluminium.

WEDOLIT CN 2610-18 has been developed, to treat all materials and grades of difficulty, with only one grinding oil.

WEDOLIT CN 2610-18 has a type approval at company KAPP.

Corrosion protection for a longer time depends of the treated material. In tests the corrosion protection, especially for non-ferrous metals, should be investigated. So far the immediate degreasing of the metal surface is recommended. The non-ageing oily film can easily be removed with the aid of organic solvents (e.g. petroleum) or water soluble alkaline industrial cleaning agents.

  • High inhibitor content
  • High performance through special combination of EP / AW additives
  • Excellent lubricity to achieve high surface qualities and elongated tool life while reducing the heat generation


WEDOLiT CN 3370-21

Straight Cutting Oil

WEDOLiT CN 3370-21 is a chlorine-free, highly additivated cutting-oil, based on the new GTL-technology.

WEDOLiT CN 3370-21 has been developed for deep-hole drilling applications in steel and high alloy steels. Due to its additivation, WEDOLiT CN 3370-21 provides the best tool life and fantastic surface finish. WEDOLiT CN 3370-21 can also be used for general cutting operations such as milling, turning, drilling and hobbing.

  • Additivation especially designed for deep-hole drilling
  • High surface finish of the treated work-pieces
  • Long tool life
  • Good rinsing effect and optimal chip transport
  • High dimensional accuracy at very tight tolerances


WEDOLiT CN 5370-12

Cutting Oil

WEDOLiT CN 5370-12 is a low viscous non-water soluble high performance cutting oil based on the latest GTL base oil technology. GTL base oils are free of aromatics, chlorine, zinc, nitrogen and heavy metals. CN 5370-12 is suitable for the machining of steel, stainless steel, cast iron, aluminium and non-ferrous metals. The product can be used in MQL (minimum quantity lubrication) systems (e.g. for sawing).

  • High cutting performance, which leads to an excellent surface finish and dimensional accuracy
  • Contributes to a high tool life
  • High flashpoint despite low viscosity
  • Very good air separation
  • Low consumption due to low evaporation loss


WEDOLiT CN 5370-19

Straight oil

WEDOLiT CN 5370-19 is a non-water soluble high performance cutting oil based on the newest GTL base oil technology. GTL base oils are free of aromatics, chlorine, zinc, nitrogen and heavy metal to provide optimal occupational safety for the worker. Highly alloyed steel grades, cast iron, non-ferrous metals and aluminum can be optimally treated with WEDOLiT CN 5370-19.

WEDOLiT CN 5370-19 has been designed especially for tapping-machining e.g. thread cutting on steel and alloyed steel.

Long-term corrosion protection depends on the type of treated material. WEDOLiT CN 5370-19 cannot be used for yellow metals. The non-ageing oily film can easily be removed with the aid of organic solvents (e.g. petroleum) or water soluble alkaline industrial cleaning agents.

  • High flashpoint despite of low viscosity
  • Low evaporation and consumption
  • High-cutting performance
  • Very good surface finish


WEDOLiT N 52

Universal Forming and Cutting Oil

WEDOLiT N 52 is a highly additivated forming- and cutting oil for deep drawing-, extrusion-, punching- and cutting-operations. The product is not only suitable for automotive- but also for ferritic- and high-strength chromium-nickel steel. It is applied undiluted by spraying, flooding, brushing, or rolling.

Approved by Rattunde & Co as a cutting oil for minimum quantity lubrication.

  • Reduces friction and wear and thus contributes to a long tool life
  • Leads to clean surfaces and contributes to achieve a high dimensional accuracy
  • Offers an extremely pressure resistant film
  • Outstanding load carrying capacity
  • Easily removable with organic solvents or aqueous, alkaline industrial cleaners in a spray- or dipping-process