Soluzioni Prodotti Assistenza Chi siamo Trova un distributore Contatti
Soluzioni Prodotti Assistenza Chi siamo
Soluzioni Prodotti Assistenza

Please use the following steps to send samples to Master Fluid Solutions’ Technical Services Laboratory for analysis:

  1. Contact Master Fluid Solutions' Techline, Service Engineer, District Sales Manager, or your Distributor to determine if a sample is needed for analysis.
  2. Using a clean, dry bottle, collect one pint of fluid from a running coolant nozzle or hose.
  3. Using Avery 5163 (laser) or 8133 (ink jet) labels, print off a sheet of labels.
  4. (If label stock is not available use standard paper to print label, cut out label, and affix to the bottle with clear tape)
  5. Using neat, hand-written print, fill out all information on the label.
  6. Affix label to sample bottles.
  7. Ship to:

Master Fluid Solutions
Attn: Technical Services Lab
501 West Boundary Street
Perrysburg, OH 43551-1200

Depending on the analysis requested, samples should be processed and results released within three days of receipt.

For questions or concerns, please contact Master Fluid Solutions' Techline:

(North American only) 800-537-3365

Email: [email protected]