Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support

Master STAGES™ Corrosion Inhibitors

Nothing is more counterproductive to superior surface finish than corrosion. Highly-effective Master STAGES corrosion inhibitors provide excellent protection on metals ranging from cast iron, steels, and other ferrous metals, aluminum and copper alloys, brass, and bronze with protection ranging from several days to a full 12 months and longer. Whether needing indoor corrosion protection during interim steps of the machining process, long-term outdoor protection, or for shipping parts overseas, there is a Master STAGES product to give you the assurance you need.

Master STAGES rust preventatives (RPs) can be applied by dip, flood coating, ambient-temperature or heated spraying, roller, or brush, are easily removed — and most are barium-free with low V.O.C. content. Get cost-effective protection you can rely on with Master STAGES RPs.

Number of products in category is 8

Master STAGES™ CLEAN 2029 'One Step'

Parts Washing Fluid with Corrosion Inhibitor

Master STAGES™ CLEAN 2029 'One Step'

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
  • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Master STAGES™ CLEAN 2030

Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers

Master STAGES™ CLEAN 2030

Master STAGES™ CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030's oil-rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer
  • Will provide one-to two-weeks' indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
  • Will remove coolant residues as well as straight oils

Master STAGES™ CLEAN 2115AL

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
  • Provides short-term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2118

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2118 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces.

  • Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2118 an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Provides excellent short-term corrosion inhibition on most common ferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2430

Near-neutral Washing Compound

Master STAGES™ CLEAN 2430

Master STAGES™ CLEAN 2430 is a highly-concentrated, mild pH, liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in high-pressure spray washers
  • CLEAN 2430 "splits" oils to the surface of the cleaner tank for easy skimming
  • Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
  • Provides long life between washer cleanouts

Master STAGES™ NOCOR® E6

Low V.O.C. Emulsion Corrosion Inhibitor Concentrate

Master STAGES™ NOCOR<sup>®</sup> E6

Master STAGES™ NOCOR E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from in-plant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.

  • Environmental approvals are simplified because NOCOR E6 is nitrite, barium, boron, phenol, and phosphate free
  • NOCOR E6 is low foaming, for use in low-pressure spray washers and flow coating operations. Dip application is also a good way to apply this product
  • An excellent choice where both ferrous and/or copper alloy parts are being processed
  • NOCOR E6 has a moderate pH, is practically odorless, and is nonflammable for improved safety
  • Working concentration ranges from 4% - 16% which translates into much lower cost than traditional straight oil/solvent products

Master STAGES™ NOCOR® S2

Water-soluble Corrosion Inhibitor

Master STAGES™ NOCOR<sup>®</sup> S2

Master STAGES™ NOCOR S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3% - 10% in water, it provides a very thin, water-soluble protective film.

  • The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
  • Barium free and contains very low levels of volatile organic compounds as applied

Master STAGES™ RPO 6BF

Barium-free, Low Odor, Corrosion Inhibitor

Master STAGES™ RPO 6BF

Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.

  • Barium free
  • Light film for limited carryoff
  • Excellent corrosion inhibition, generally in excess of six months in dry storage
  • Nonstaining
  • Provides cleaning action
  • Water displacing to help prevent rust due to water trapped under the protective film
  • Oxidation resistant to resist tarnishing over long storage periods
  • Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
  • Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)