Home

Home

Straight Oil Cutting & Grinding Fluids

Straight to the point-of-cut:

TRIM® straight oils, used "straight up" without dilution of water are used for maximum lubricity. Typically used for operations such as Swiss-style screw machines, honing, grinding very difficult to machine materials, and gun drilling.

Depending on the specific product, some TRIM straight oils are a highend blend of various base oils, while others contain extreme pressure additives to control built-up edge and for added tool life.

Get straight to the cut with TRIM straight oils.

Number of products in category is 8

TRIM<sup>®</sup> OD 250

TRIM® OD 250 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OD 250 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat. OD 250 is also an excellent choice for carbide, quartz, and ceramic grinding operations.

  • Well-balanced, extreme-pressure additive package for a wide variety of applications
  • Light color
  • Low odor
  • Viscosity and lubricity balanced for creepfeed grinding, deep-hole drilling, and fine surface grinding

TRIM® OH200

Superfinish and Honing Oil

TRIM<sup>®</sup> OH200

TRIM® OH200 is a medium-duty honing and superfinishing straight oil for alloy steels. OH200 can also be used for tapping and reaming of cast iron and aluminum alloys.

  • Good lubricity
  • Will not stain copper alloys
  • High flash point
  • Contains no kerosene
  • Copper Corrosion Test: Inactive at 212°F, 100°C, 1 hour

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM<sup>®</sup> OM 100

TRIM® OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaners such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM<sup>®</sup> OM 287

TRIM® OM 287 is a straight cutting oil designed for general machining of all metals. OM 287 has a balanced, extreme-pressure package for excellent finishes and tool life on a variety of metals.

  • Excellent lubricity for efficient metal removal
  • Light color and low odor for good operator acceptance
  • Will not stain; runs clear
  • High-quality raw materials resist oxidation
  • Lower viscosity allows better cooling
  • Safe for use on nonferrous as well as ferrous metals

TRIM<sup>®</sup> OM 300

TRIM® OM 300 is a high-performance straight cutting oil designed with active extreme-pressure additives to reduce the formation of built-up edge in cutting hard-to-machine materials including 300 series stainless. Moderate viscosity and high flash point makes OM 300 a very effective lubricant for difficult creepfeed grinding operations.

  • Controls built-up edge
  • Longer tool life
  • Better finish
  • Machines difficult ferrous and stainless steel alloys

TRIM® OM 303

Nonchlorinated Cutting and Lubricating Oil

TRIM<sup>®</sup> OM 303

TRIM® OM 303 is a highly formulated straight oil designed for use in conventional and Swiss style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. OM 303 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. This product is excellent for high-pressure applications such as thread rolling and thread-form tapping. OM 303 has proven itself in difficult operations on stainless and bearing steels. OM 303 provides lubrication properties similar to ISO 32 general-purpose lube oils

  • Very light colored and clean running
  • Low foaming and low misting for use in aggressive operations
  • Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Has replaced dark, active sulfur/chlorine straight oils in several large operations while providing superior results in tool life
  • An outstanding product in thread rolling, thread form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur; therefore, does not stain parts

TRIM® OM 313

Low V.O.C., Nonchlorinated, Cutting and Lubricating Oil

TRIM<sup>®</sup> OM 313

TRIM® OM 313 is a chlorine-free straight oil for use in conventional and Swiss-style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. Excellent for high-pressure applications such as thread rolling and thread-form tapping. Proven on stainless and bearing steels. Low V.O.C. levels meet SCAQMD Rule 1144 for cleaner air. Safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. Provides lubrication properties similar to ISO 32 general-purpose lube oils.

  • Excellent chlorine-free lubricity package for difficult applications and materials
  • Low V.O.C. levels that meet SCAQMD Rule 1144 for cleaner air
  • Provides machine lubrication properties similar to ISO 32 general-purpose lube oils
  • Light colored, clean running
  • Can replace dark, heavy-active sulfur/chlorine straight oils while providing superior results in tool life
  • Low-foaming and low-misting for use in aggressive operations
  • Oxidation inhibited for longer life
  • Excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Great for thread rolling, thread-form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur, therefore, does not stain parts

TRIM® OV 2200

Premium Vegetable-based Oil

TRIM<sup>®</sup> OV 2200

TRIM® OV 2200 is a bio-based straight oil for machining difficult alloys and stainless steels. Formula utilizes a proprietary blend of renewable resources to eliminate the need for traditional additives such as chlorine, sulfur, and animal fats. Allows users to improve their environmental profile by replacing products that contain V.O.C.

  • Environmentally friendly product which is free of V.O.C., chlorine, and animal fats
  • Delivers productivity improvements versus traditional mineral oils
  • Improves shop environment by reducing unpleasant odors and residues
  • Light colored, clean running
  • Versatile formulation developed to machine difficult alloys and stainless steels
  • Protects sensitive aluminum and copper alloys
  • Improves oxidative stability over previous generations of vegetable oils
  • Meets medical industry restrictions