Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM® TC 184B

Nonsilicone Antifoam

TRIM<sup>®</sup> TC 184B - 2 quart tip"N" measure<sup>®</sup>

Application Guidelines

  • The maximum add rate is one gallon per 1000 gallons of sump volume. You may find that using less than this will be effective in your system.
  • For best results, pre-mix TC 184B with working solution until it is water-thin. This mixture should then be added just up-stream from the foam.
  • Spraying pre-mixed TC 184B directly onto the foam will knock it down quickly.
  • Using too much TC 184B can cause increased foam and/or form a residue on the machine parts or tools.
  • Shake or stir well before adding. If you make a dilution with working solution, shake or stir that mixture also before adding.
  • Do not freeze or store above 115°F.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/na/en-us/distributors/index.php, your District Sales Manager, or call our Tech Line at 1-800-537-3365.

TRIM® TC 184B   
©1998-2024 Master Fluid Solutions®