Login
Home


The Future of Corrosion Protection
The Future of Corrosion Protection

Straightening oils with high corrosion protection

Ideal for short-term corrosion protection of dry workpieces, suitable for light forming operations, VOC free
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 59°F: 0.85 g/cm3 ASTM D 7042
Viscosity at 68°F: 10.5 cSt ASTM D 7042
Flash point: > 212 °F DIN EN ISO 2719
Film weight: 1.2 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: None Internal test method
Water separation: 18 min Internal test method
Humidity test: 60 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 24 h DIN EN ISO 9227 NSS

Corrosion protection for overseas transportation with dewatering effect

VOC free for long-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 59°F: 0.83 g/cm3 ASTM D 7042
Viscosity at 68°F: 5.4 cSt ASTM D 7042
Flash point: > 212 °F DIN EN ISO 2719
Film weight: 1.5 g/m2 Dipping procedure
Film type: Micro wax Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 25 min Internal test method
Humidity test: 100 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 50 h DIN EN ISO 9227 NSS
VOC free for short-term corrosion protection
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Yellow-medium-brown, clear Visual
Density at 59°F: 0.86 g/cm3 ASTM D 7042
Viscosity at 68°F: 13.8 cSt ASTM D 7042
Flash point: > 248 °F DIN EN ISO 2719
Film weight: 1.5 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 17 min Internal test method
Humidity test: 50 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 2 h DIN EN ISO 9227 NSS

High performance dewatering fluids

Very fast dewatering, offers short-term corrosion protection, VOC free version
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 59°F: 0.81 g/cm3 ASTM D 7042
Viscosity at 68°F: 4.1 cSt ASTM D 7042
Flash point: > 212 °F DIN EN ISO 2719
Film weight: 0.3 g/m2 Dipping procedure
Film type: Very slightly oily Haptical
Dewatering effect: ≤ 5 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 7 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS

Wax based products

Very high protection product, no negative labeling, VOC free, potentially for outdoor storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, turbid, pasty Visual
Density at 59°F: 0.90 g/cm3 ASTM D 7042
Viscosity at 68°F: Not measurable ASTM D 7042
Flash point: > 212 °F DIN EN ISO 2719
Film weight: Depending on the application Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 1800 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 35 h DIN EN ISO 9227 NSS

Water-miscible corrosion protection

Water-miscible parts cleaner, very good corrosion protection, application at approximately 60°C, for steel and non-ferrous metals
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Dark brown, clear-slightly turbid Visual
Density at 59°F: 0.91 g/cm3 ASTM D 7042
Viscosity at 104°F: 44.0 mm2/s ASTM D 7042
Flash point: > 212 °F DIN EN ISO 2719
pH-value [20%; 158°F]: 9.8 DIN EN ISO 10523
Conductivity [20%; 158°F]: 1850 µS/cm DIN EN 27888
Corrosion protection properties
Concentration: 10% 20% 100% Tested according to
Film weight: 1.8 g/m2 4.7 g/m2 5.2 g/m2 Dipping procedure
Humidity test: > 1 d > 2 d > 4 d DIN EN ISO 6270-2 AHT
Salt spray performance: < 2 h < 16 h > 24 h DIN EN ISO 9227 NSS