Login
Home

WEDOLiT CN 5370-22

High-performance cutting oil

Documents
Read More...

WEDOLiT CN 5370-22 iis a low viscous non-water soluble high performance cutting oil for thread cutting operations, which is based on the latest base-oil-technology. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminum and non-ferrous metals.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additivation for thread cutting operations
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behavior
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners


WEDOLiT C 24 K

Assembling aid

Documents
Read More...

WEDOLiT C 24 K is a full synthetic cooling lubricant with a high viscosity. The product contains no mineral oil, sodium nitrite and p-tert.-butyl benzoic acid. According the regulation on hazardous substances (GefStoffV) it contains no substances for labeling. The concentrate is water soluble in any proportion.

WEDOLiT C 24 K is preferred used for expanding or reduction of aluminium tubes. The application can be carried out with brushers or with appropriate spray equipment.

WEDOLiT C 24 K is marked through its stability against temperature.

Furthermore WEDOLiT C 24 K can be used as gliding- and processing aid for assembly lubrication for easier assembly.

Surfaces which were treated with WEDOLiT C 24 K can be cleaned easily with warm water. The compatibility should be general determined in pre-tests.



    WEDOLiT CN 2370-7

    High Performance Grinding Oil

    WEDOLiT CN 2370-7 is a low viscous, high performance grinding oil based on the latest gas to liquid (GTL) technology. GTL-base-oils are free of aromatics, chlorine, zinc, nitrogen, and heavy metals, to provide the best occupational safety for the worker. The product is suitable for the machining of HSS and carbides (especially with a high cobalt content). The product is also suitable for general cutting operations as well as for gear hobbing.

    • High performance product, which leads to an excellent surface finish and dimensional accuracy
    • Highly reduced oil mist formation, almost no loss of evaporation
    • Reduces friction and wear and thus contributes to a long tool life
    • Offers high cooling properties with a very good wetting behavior
    • Very good flushing behavior with an optimal transport of chips and swarf
    • Easily removable with organic solvents or alkaline industrial cleaners


    WEDOLiT CN 2610-18

    Straight cutting oil

    WEDOLiT CN 2610-18 is a low viscous, high performance grinding oil for the machining of steel, stainless steel, cast iron, aluminum and non-ferrous metals. The product is also suitable for general cutting operations as well as for gear hobbing.

    • High performance product, which leads to an excellent surface finish and dimensional accuracy
    • Highly reduced oil mist formation, almost no loss of evaporation
    • Reduces friction and wear and thus contributes to a long tool life
    • Offers high cooling properties with a very good wetting behavior
    • Very good flushing behavior with an optimal transport of chips and swarf
    • Easily removable with organic solvents or alkaline industrial cleaners


    WEDOLiT CN 3370-21

    High performance cutting oil

    WEDOLiT CN 3370-21 is a low viscous, high performance cutting oil based on the latest gas to liquid (GTL) technology. The product is suitable for deep hole drilling of steel, stainless steel, and aluminum. The product is also suitable for general cutting operations as well as for gear hobbing.

    • High performance product, which leads to an excellent surface finish and dimensional accuracy
    • Special additiviation for deep hole drilling
    • Highly reduced oil mist formation, almost no loss of evaporation
    • Reduces friction and wear and thus contributes to a high tool life
    • Offers high cooling properties with a very good wetting behavior
    • Very good flushing behavior with an optimal transport of chips and swarf
    • Easily removable with organic solvents or alkaline industrial cleaners


    WEDOLiT CN 5370-12

    High-performance cutting oil

    WEDOLiT CN 5370-12 is a low viscous, non-water soluble high performance cutting oil based on the latest GTL-baseoil-technology, which was developed for thread cutting operations. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminum, and non-ferrous metals.

    • High performance product, which leads to an excellent surface finish and dimensional accuracy
    • Special additivation for thread cutting operations
    • Highly reduced oil mist formation, almost no loss of evaporation
    • Reduces friction and wear and thus contributes to a high tool life
    • Offers high cooling properties with a very good wetting behavior
    • Very good flushing behavior with an optimal transport of chips and swarf
    • Easily removable with organic solvents or alkaline industrial cleaners


    WEDOLiT CN 5370-19

    Straight oil

    Documents
    Read More...

    WEDOLiT CN 5370-19 is a non-water soluble high performance cutting oil based on the newest GTL base oil technology. GTL base oils are free of aromatics, chlorine, zinc, nitrogen and heavy metal to provide optimal occupational safety for the worker. Highly alloyed steel grades, cast iron, non-ferrous metals and aluminum can be optimally treated with WEDOLiT CN 5370-19.

    WEDOLiT CN 5370-19 has been designed especially for tapping-machining e.g. thread cutting on steel and alloyed steel.

    Long-term corrosion protection depends on the type of treated material. WEDOLiT CN 5370-19 cannot be used for yellow metals. The non-ageing oily film can easily be removed with the aid of organic solvents (e.g. petroleum) or water soluble alkaline industrial cleaning agents.

    • High flashpoint despite of low viscosity
    • Low evaporation and consumption
    • High-cutting performance
    • Very good surface finish


    WEDOLiT CS 6201

    Water-miscible, fully synthetic coolant

    Documents
    Read More...

    WEDOLiT CS 6201 is suitable for grinding of steel, cast iron, aluminium, non-ferrous metals, glass and especially carbides.

    • Offers high cooling- and flushing properties with a very good wetting behavior
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a good skin compatibility


    WEDOLiT CS 6206

    Water soluble coolant

    Documents
    Read More...

    WEDOLiT CS 6206 is a water soluble, high performance lubricant. Developed with highest technical standards for a wide range of grinding operations. WEDOLIT CS 6206 is a boric-acid, amine- and formaldehyde-depot free coolant.

    WEDOLiT CS 6206 is suitable for many grinding operations such as centerless, round grinding and surface grinding, at steel, yellow metal high carbide steel and HSS. WEDOLiT CS 6206 effectively prevents the occurrence of cobalt and copper ions in the grinding solution, thereby avoiding a number of problems in carbide and red brass processing. The grinding solutions do not carry any harmful cobalt and copper salts which are detrimental to health and wastewater, thus not discoloring and remain transparent.

    • High tool lifetime
    • Good anti corrosion effect
    • Best flushing behavior
    • Very good flushing of the grinding disks
    • Neutral smell
    • Good skin compatibility
    • WHC 1


    WEDOLiT CS 8016

    Water-miscible, fully synthetic coolant

    Documents
    Read More...

    WEDOLiT CS 8016 is suitable for grinding as well as for light to medium cutting operations of steel, cast iron, aluminium and chromated surfaces.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT CS 8376

    Water-miscible, fully synthetic polymer-based coolant

    Documents
    Read More...

    WEDOLiT CS 8376 is suitable for grinding as well as for light to heavy cutting operations of steel, stainless steel, cast iron, aluminium, titanium and non-ferrous metals.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life (especially in difficult machining operations of titanium, or Inconel)
    • Very good application stability
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT CS 9016

    Water soluble coolant

    Documents
    Read More...

    WEDOLiT CS 9016 is a water soluble, high performance lubricant. Developed with highest technical standards for a wide range of grinding operations.

    WEDOLiT CS 9016 is suitable for many grinding operations such as centerless, round grinding and surface grinding, at steel.

    • High tool lifetime
    • Good anti corrosion effect
    • Best flushing behavior
    • Very good flushing of the grinding disks
    • Neutral smell
    • Good skin compatibility


    WEDOLiT CS 9040

    Water-miscible, fully synthetic coolant

    Documents
    Read More...

    WEDOLiT CS 9040 is suitable for grinding of steel and glass. The product is also suitable as a press water medium for tubes.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a good skin compatibility


    WEDOLiT CS 9203

    Water-soluble, fully synthetic coolant

    Documents
    Read More...

    WEDOLiT CS 9203 is usable for different metalworking operations on steel and ferrous metals in grinding, cutting operations as well as a cooling agent for tube-welding- and profiling machines. Especially adequate as a transmission fluid for hydraulic presses (e.g. U- and O-presses) or a lubricating- /anti corrosion agent in hydro testers.

    • Good spray behaviour and well wetting
    • Very good flushing (e.g. for the grinding disk)
    • Stable film forming without adhesion
    • Good long-term stability
    • High tool life-time
    • Effective corrosion protection


    WEDOLiT CW 6336

    Water-miscible, conventional coolant

    Documents
    Read More...

    WEDOLiT CW 6336 is suitable for grinding as well as for light to heavy cutting operations of steel, cast iron, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series) and non-ferrous metals*.

    WEDOLiT CW 6336 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for aerospace industry.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Good soft water stability (at approximately 5°dH)
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT CW 6506

    Water-miscible, conventional coolant

    Documents
    Read More...

    WEDOLIiT CW 6506 is suitable for light to heavy cutting operations of steel, stainless steel, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), titanium and non-ferrous metals*.

    WEDOLiT CW 6506 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for aerospace industry.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT CW 8006

    Water-miscible, semi synthetic coolant

    Documents
    Read More...

    WEDOLiT CW 8006 is suitable for light to heavy cutting operations of steel, stainless steel, cast iron and aluminium.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a good skin compatibility


    WEDOLiT CW 8906

    Water-miscible, ester-based coolant

    Documents
    Read More...

    WEDOLiT CW 8906 is suitable for grinding as well as for light to heavy cutting operations of steel, stainless steel, aluminium and titanium.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT CW 9006-CM

    Water-miscible, semi synthetic coolant

    Documents
    Read More...

    WEDOLiT CW 9006-CM is suitable for grinding as well as for light to medium cutting operations of steel, stainless steel and cast iron.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Good soft water stability (at approximately 10°dH)
    • Almost free of foam
    • Offers a good skin compatibility


    WEDOLiT CW 9206

    Water-miscible, semi synthetic coolant

    Documents
    Read More...

    WEDOLiT is suitable for grinding as well as for light to heavy cutting operations of steel, cast iron and aluminium.

    • Offers high cooling- and flushing properties with a very good wetting behaviour
    • Contributes to a high tool life
    • Very good application stability
    • Good soft water stability (at approximately 10°dH)
    • Almost free of foam
    • Offers a very good skin compatibility


    WEDOLiT K 81

    Water-miscible coolant

    Documents
    Read More...

    WEDOLiT K 81 is a water-miscible coolant, based on mineral oil. With water WEDOLIT K 81 forms stable emulsions in every mixture proportions. Emulsifying agents, inhibitors and high-pressure additives are combined, to allow a multipurpose application like metal working operations as well as corrosion protection.

    WEDOLiT K 81 is used as emulsion for chipless and cutting metal-working-operations. For corrosion protection we recommend the application by flooding with emulsion or the application of the concentrate.

    A very good corrosion protection is given by application as a hot emulsion (approx. 80°C) with a concentration of approx. 20% on zinc-phosphate coated surfaces with a layer of approx. 10-12 g/m². The corrosion protection test (salt-spraying-test) according to ASTM-B 117 or DIN 50021 gives no corrosion after a test-time of 48 hours.

    WEDOLiT K 81 is easily removable with industrial cleaners. After annealing under protective atmosphere no residues will be found.



      WEDOLiT K 975-4

      Watermiscible coolant

      Documents
      Read More...

      WEDOLiT K 975-4 is a semi synthetic watermiscible coolant. Developed with highest technical standards for a wide range of cutting operations.

      WEDOLiT K 975-4 is a high-performance coolant, useable for easy to heavy cutting operations of aluminium, steel alloys and yellow-metal. Discoloration of yellow metals must be pre-tested although.

      • Boric-acid and Amine-free
      • Formaldehyde-releaser-free
      • good foam behavior
      • Good anti corrosion effect


      WEDOLiT N 52

      Universal forming and cutting oil

      WEDOLiT N 52 is a mineral-oil based high-performance lubricant, suitable for all kinds of minimum quantity lubrication systems, e.g. for milling, sawing or thread forming, of steel, aluminum and non-ferrous metals*.
      Approved by Rattunde & Co as a cutting oil for minimum quantity lubrication.

      • Stable load carrying capacity and a homogenous sliding behavior
      • Very good wetting ability and film formation without adhesion
      • The outstanding cooling- and lubrication properties lead to significantly reduced friction and wear and thus contribute to a high tool life
      • Leads to clean surfaces and contributes to achieve dimensional accuracy
      • Economical application
      • Easily removable with organic solvents or alkaline industrial cleaners