Home
Login
Home
WEDOLiT N 52
Description
Case Study
Application Guidelines
Properties
Concentrations
Mixing
SDS (Customer Member Login)
Data Sheet
Documents
Videos

WEDOLiT N 52

Neat Oil

WEDOLiT N 52

WEDOLiT N 52 is a chlorine free, high additivated drawing- and cutting oil for deep drawing-, extrusion molding, punching- and cutting operations. The product is suitable not only for car body sheets steel but also for high-strength chromium-nickel steel.

A combination of polaric EP-additives and native lubricity agents ensure an extreme pressure resistant lubricating film. The application even at highest metal working operations is possible and substitute for chlorine containing products.

Due to the chemical additivation the corrosion protection for a longer time depends on the treated material. The protecting term of workpieces should be determined in pre-tests, especially if they are not from high grade steel. Until corresponding values are available, a immediately degreasing of the metal surface should be carried out This is especially recommended at copper- and brass- alloys, because discolouration are possible.

WEDOLiT N 52 is applied undiluted by spraying, flooding or by means of a brush or felt roller. The removal of the water insoluble oil can be carried out with organic solvents or aqueous, alkaline industrial cleaners by spray- or dipping degreasing.

WEDOLiT N 52 contains no insoluble pigments such graphite or molybdenum disulphide.

WEDOLiT N 52 is approved by Rattunde & Co. for minimum-quantitiy-lubricating.


WEDOLiT N 52   
©1998-2020 Master Fluid Solutions®