Home
Login
Home
Water-Miscible-en-US.png
Number of products for application is 11

WEDOLiT AW 8321 (K 110)

Water-miscible High-performance Fluid

WEDOLiT AW 8321 is universally applicable for parts cleaning and corrosion protection. The mineral oil free product is not only suitable for steel, but also for non-ferrous metals. Utilizing the latest technology, AW 8321 offers the possibility for a boron and formaldehyde free application.

  • The product forms a stable emulsion, regardless of the concentration. Due to the electrolyte and temperature stability, an application in heated baths is possible (recommended temperature 60 - 80°C)
  • Even at high temperatures the product is stable against contaminations (e.g. sodium sulfonates or phosphates)
  • Easily removable with solvents or alkaline industrial cleaners
  • For the corrosion protection it´s important that treated parts are completely dry before packaging. Dependent on the concentration a minimal to slightly noticeable film is formed on the metal surface
  • Very good compatibility with VCI foils
  • Outstanding material compatibility (even at higher concentration)


WEDOLiT EP 1090 E

High performance expander oil

WEDOLiT EP 1090 E is a high viscosity, highest performance, special oil, based on esters of natural origin. It is developed according to the highest technical standard for use in the pipe industry. The product has worldwide release of the expander head manufacturer SMS Meer and Fontijne Grotnes and is recommended by HAEUSLER, YSD, Mannesmann-Demag and Iprolam for the expander heads.

WEDOLIT EP 1090 E is used for lubrication of sliding surfaces and guideways mechanical expander under extremely high surface pressure in the manufacture of large diameter pipes made of steel, for example, for gas and oil pipelines. WEDOLIT EP 1090 E is used undiluted for the forming process. The product is self-emulsifying and can be removed by water. The emulsion can be used for pre- and postcleaning of the pipes and to clean the expander head.

  • Very high lubricating film stability under load
  • Good adhesion to smooth surfaces, good wear protection
  • Prevents stick-slip
  • Easily washable with water / emulsifies spontaneously
  • Stable emulsion but very easy to split


WEDOLiT EP 435 E

Expander oil

WEDOLiT EP 435-E is a highly viscous, high-performance forming oil for the pipe industry, which is based on natural esters. It is suitable for the lubrication of sliding surfaces and guideways of mechanical expanders under extreme pressures (e.g. the manufacture of large diameter steel-pipes, for gas and oil pipelines). The product can be used undiluted and is self-emulsifying. Therefore, it can be easily removed by water. The emulsion can be used for pre- and post-cleaning of pipes and expander heads.

  • The emulsion can be treated with suitable additives to be split into water and oily waste. The treated water can be reused to prepare new emulsion
  • Very high lubrication properties with a high film stability under load
  • Good adhesion, even to smooth surfaces
  • Offers a good wear protection
  • Prevents stick-slip


WEDOLiT EP 540 ES

Expander oil, Easy-splitting-technology

WEDOLiT EP 540 ES is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and due to the high content of polar additives, prevents the stick-slip-effect.

  • Very high film stability (even under high pressures)
  • Good adhesion properties on smooth surfaces, very good wear protection
  • Easily removable with water (spontaneous emulsification)
  • The emulsion can be used for pre- and post-cleaning of the pipes and expander heads and can be easily separated into water and oily waste by utilizing specific additives
  • Due to the unique easy-splitting-technology, only a very small amount of the splitting media is needed
  • The treated water can be reused for the preparation of a new emulsion (to a certain degree)


WEDOLiT EP 760 E

Expander oil

WEDOLiT EP 760 E is a high-viscosity, high-performance, special oil based on natural esters, developed according to the highest technical standard for use in the tube industry. The product has worldwide approvals by expander head manufacturers SMS Meer and Fontijne Grotnes and is recommended by Heusler and Iprolam.

WEDOLiT EP 760 E is used for the lubrication of sliding surfaces and guideways of mechanical expander under extremely high surface pressure in the production of large diameter pipes made of steel, e.g. for gas and oil pipelines. WEDOLiT EP 760 E is used undiluted for the forming process. The product is self-emulsifying and can be removed by water. The emulsion can be used for pre- and post-cleaning processes of tubes and expander heads. Spent EP 760 E can be treated with suitable additives to split into water and oily waste. The split water can be reused when mixing new batches of EP 760 E.

  • Very high lubricating-film stability under load
  • Good adhesion to smooth surfaces, good wear protection
  • Prevents stick slip
  • With water easily washable / emulsified spontaneously.
  • Stable emulsion, easy to split
  • Increased forming performance for tubes of stronger and / or thicker material


WEDOLiT EP 760 ES

Expander Oil, Easy-splitting Technology

WEDOLiT EP 760-ES is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and due to the high content of polar additives, prevents the stick-slip-effect.

  • Very high film stability (even under high pressures)
  • Good adhesion properties on smooth surfaces, very good wear protection
  • Easily removable with water (spontaneous emulsification)
  • The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be easily separated into water and oily waste by utilizing specific additives
  • Due to the unique easy-splitting-technology, only a very small amount of the splitting media is needed
  • The treated water can be reused for the preparation of a new emulsion (to a certain degree)


WEDOLiT FW 7651

Water-miscible, fully synthetic coolant

WEDOLiT FW 7651 is suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 3 - 5%).

  • Due to its thermal stability the product can be used in the whole production line (forming, welding, calibration, sawing)
  • No emulsification of mineral oils and engine lubricants. Therefore, the application of an anticorrosion oil is possible (e.g. on the Turk’s head of the tube welding engine in the manufacture of profiled tubes)
  • Can be centrifuged without loss of active substances
  • Removable with organic solvents or alkaline industrial cleaners
  • A bright workpiece surface is obtained after annealing


WEDOLiT FW 7652

Water miscible, fully synthetic coolant

WEDOLiT FW 7652 is applicable for the manufacturing of steel tubes on tube welding machines, as well as press water additive. Furthermore it can also be used for zinc coated materials, whereat the formation of white corrosion is prevented.

  • Popular in use as a cooling lubricant in the manufacture of steel tubes on tube welding machines.
  • In a 5% aqueous solution, it fulfils the requirements for lubrication of the working rollers, cleanliness of the rollers and tubes, and corrosion protection for the tubes and the machine.
  • Based on the thermal stability, it can be used for cooling the electrode respectively the coil and impeder in high frequency welding, but also in the water cooling line for the weld seam.
  • The entire tube welding machine can thus be operated with a closed-circuit cooling system, requiring no intake of other water.
  • Removable with organic solvents or alkaline cleaners. Bright surface are preserved during heat treatment under inert gas.


WEDOLiT FW 7661

Water miscible, fully synthetic coolant

WEDOLiT FW 7661 is popular in the manufacture of steel tubes on tube welding engines. With 3-5% aqueous solution, it fulfils the requirements for lubrication of the working rollers, cleanliness of the rollers and tubes and spend corrosion protection for the tubes and the machinery. Furthermore it can be used as additive in hydro-tester solutions to test the tubes on leak-tightness

With its thermal stability, it can be used not only for cooling of the electrode or the coil and impeder in high frequency welding, but also in the water cooling line for the weld seam. The entire tube welding machine can thus be operated with a closed-circuit cooling system, requiring no intake of other water.

  • Fulfil the requirements of the TRG 611
  • No emulsifying effect regarding mineral oils and engines lubricants.
  • Anticorrosion oil can thus be used on the Turk’s head of the tube welding engine in the manufacture of sectional tubing.
  • The cooling lubricant penetrating into the anti-corrosion oil separates from the oil residue after a relatively short settling time and without emulsifying.
  • Can be centrifuged out without loss of active substances.
  • Removable with organic solvents or alkaline cleaners.
  • The bright surface is preserved during a heat treatment under inert gas.


WEDOLiT FW 7840

Water-miscible, semi synthetic coolant

WEDOLiT FW 7840 is suitable for light to medium cutting operations of steel, stainless steel and cast iron. Additionally, the product is suitable for the manufacturing of welded steel and galvanized steel tubes.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility
  • Due to its thermal stability the product can be used in the whole production line of welded tubes (forming, welding, calibration, sawing)


WEDOLiT FW 9200

Water soluble Coolant

WEDOLiT FW 9200 is a water miscible high performance cooling lubricant with a high share of particularly efficient, polar lubricating additives based on natural fatty esters and fatty acids.

  • Boron free
  • Amine free
  • High lubrication performance
  • Good skin tolerance
  • WHC 1