Home

Home

High-speed Centrifuges and Tramp Oil Removal

Master Chemical Corporation is an expert in the high-speed centrifugation of metalworking fluids for tramp oil removal. Only a high-speed centrifuge will get out oils which have become mechanically sheared or partially chemically emulsified in the fluid. Fluids free of tramp oil last longer, give better tool life, and save you money. Get guaranteed less than 0.5% tramp oil with centrifugation. It`s quick and easy!

Number of products in category is 7

Centrifugal Removal of Tramp Oil by a High Speed Disc Bowl Centrifuge

High-speed disc-bowl centrifuge

For Tramp Oil Removal

High-speed disc-bowl centrifuge

The High-speed disc-bowl centrifuge is an engineered tramp oil separator system utilizing rugged, properly sized, engineered, and reliable centrifuges.

Available with both solid-wall bowl centrifuges (manual) or with self-desludging bowl centrifuges (automatic).

    Tramp Oil Terminator™

    Portable Centrifuge Unit for Removing Emulsified Tramp Oils

    Tramp Oil Terminator™

    Developed to meet the needs of the small metalworking plant for a compact, portable, high-speed centrifuge, tramp oil separator, the Tramp Oil Terminator™ will process both water-miscible coolants and aqueous cleaners to remove free and emulsified tramp oils, providing clean and reusable coolants and cleaners. Removing tramp oils (hydraulic oils, way lubes or any undesirable oil) from coolants and cleaners removes a food source for bacteria, reduces undesirable residues, and reduces smoke and oil mist in the shop atmosphere.

    Benefits

    • Extended life of coolants and cleaners
    • Improved machining
    • Longer tool life

    Features

    • Compact and portable for machine tool sumps and parts washers
    • Simple operation
    • High-speed, disc-bowl centrifuge
    • Stainless-steel hood and bowl
    • Built-in clean fluid centripetal discharge pump
    • Easy dismantling of bowl for cleaning
    • Quick disconnects on feed and discharge
    • Strainer and 50 micron cleanable pre-filter
    • Air pump and floating skimmer for feed
    • Automatic shut off when tramp oil collection tank is full

    XYBEX® Custom Systems

    XYBEX<sup>®</sup> Custom Systems

    XYBEX®Custom Systems, a spin-off of the 1000 system, is a complete, full capacity single product coolant recycling system. The system usually shares the same operation and layout as the 1000. However, tank capacities and the centrifuge are altered to meet customer's needs.

    For plants operating with one coolant, the Custom Systems capacities can be enlarged to meet sump capacities of the larger metalworking plants.

    • Custom sized dirty tank
    • Custom sized clean tank
    • UNIMIX™ automatic coolant proportioning pump for coolant makeup and concentration control
    • High-speed disc-bowl, liquid-from-liquid centrifuge to clean coolant to less than 0.5% emulsified tramp oil and 2-5 microns of particulate matter
    • SCROUNGER®oil belt skimmer for removal of free floating, nonemulsified tramp oil
    • Automatic operation

      XYBEX® System 750

      XYBEX<sup>®</sup> System  750

      The XYBEX® System 750 is a full-featured recycling system, which includes a high-speed centrifuge to allow complete recycling of any stable metalworking coolant.

      Application

      • For plants operating with one coolant and total coolant sump capacities not exceeding 2500 U.S. gallons (9,300 liters)

      Features

      • Small foot print – features over/under tank design
      • 120 gallon (455 liter) dirty tank
      • 160 gallon (600 liter) clean tank
      • High-speed, disc-bowl, liquid-from-liquid centrifuge to clean coolant to less the 0.5% emulsified tramp oil and 2-5 microns of particulate matter
      • UNIMIX™ positive displacement coolant proportioning pump for coolant make up and concentration control
      • SCROUNGER® oil belt skimmer
      • Automatic operation

        XYBEX® System 1000

        XYBEX<sup>®</sup> System 1000

        The XYBEX® System 1000 is a complete, full capability single product coolant recycling system for the medium-sized metalworking plant operation with machine tools fitted with their own coolant sumps.

        Application

        • For plants operating with one coolant and total sump capacities not exceeding 5,000 U.S. gallons (18,900 liters)

        Features

        • Small foot print – features over/under tank design
        • 300 gallon (1140 liters) dirty coolant tank
        • 450 gallon (1700 liters) clean coolant tank
        • UNIMIX™>automatic coolant proportioning pump for coolant makeup and concentration control
        • High-speed, disc-bowl, liquid-from-liquid centrifuge to clean coolant to less than 0.5% emulsified tramp oil and 2-5 microns of particulate matter
        • SCROUNGER®oil belt skimmer for removal of free floating, nonemulsified tramp oil
        • Automatic operation

        XYBEX® System 1200

        XYBEX® System 1200 is a "dual product" recycling system for plants which must operate using two different coolants, such as one for cutting and one for grinding.

        Application

        • For plants operating with two different coolants and total sump capacities not exceeding 5,000 U.S. gallons (18,900 liters)

        Features

        • Two 200 (760 liter) gallon dirty coolant holding tanks
        • Two 350 (1325 liter) gallon clean coolant holding tanks
        • Two UNIMIX™ auto proportioning pumps for coolant make up and concentration control
        • Two SCROUNGER®oil belt skimmers for removal of free floating, nonemulsified tramp oil
        • High-speed, disc-bowl, liquid-from-liquid centrifuge to clean coolant to less than 0.5% emulsified tramp oil and 2-5 microns of particulate matter
        • Manual or automatic product switching controls
        • Automatic operation

          XYBEX® System 2001

          XYBEX<sup>®</sup> System 2001

          The XYBEX® System 2001 is a complete, full capability single product coolant recycling system for the medium-to-large-sized metalworking plant operating with machine tools fitted with their own coolant sumps.

          Application

          • The XYBEX System 2001 will provide makeup coolant and will recycle a sufficient quantity of fluid daily to support a total of up to 15,000 U.S. gallons (56,700 liters) of coolant or more in the machines

          Features

          • 300 gallon (1140 liters) dirty coolant holding tank
          • 450 gallon (1700 liters) clean coolant holding tank
          • UNIMIX™ automatic coolant proportioning pump
          • High-speed, disc-bowl, liquid-from-liquid centrifuge to clean coolant to less than 0.5% emulsified tramp oil and 2-5 microns of particulate matter
          • Pre-filter for solids removal prior to centrifugation
          • Self-priming pump for dirty coolant feed to the prefilter and centrifuge
          • Automatic operation