Home
Login
Home

Forming - Neat Fluids

Number of products in category is 5

WEDOLiT FN 1490-850

Fully Synthetic Forming Oil

Health and Safety
Data Sheet
Documents
Read More...

WEDOLiT FN 1490-850 is a highly viscous, water-insoluble lubricant for tube drawing and other cold forming processes of aluminium and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

  • Stable load carrying capacity and a homogenous sliding behavior
  • Reduces friction and wear and thus contributes to a long tool life
  • Outstanding wetting ability and film formation without adhesion
  • Stable cold start behavior, preventing stick-slip and chatter
  • Leads to clean surfaces and contributes to dimensional accuracy
  • Easily removable with organic solvents or alkaline industrial cleaners
  • Evaporates at temperatures T ≥ 300°C without leaving any residue or stains on the metal surface and therefore, no preliminary degreasing is necessary before a potential soft annealing


WEDOLiT FN 2451-150

Semisynthetic forming oil

Health and Safety
Data Sheet
Documents
Read More...

WEDOLiT FN 2451-150 is a medium viscous, water-insoluble lubricant for wire drawing and other cold forming processes, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel and aluminum. The undiluted product is usually applied by brushes or rollers.

  • Stable load carrying capacity and a homogenous sliding behaviour
  • Reduces friction and wear and thus contributes to a long tool life
  • Outstanding wetting ability and film formation without adhesion
  • Stable cold start behaviour, prevents stick-slip and chatter
  • Leads to clean surfaces and contributes to achieve dimensional accuracy
  • Easily removable with organic solvents or alkaline industrial cleaners


WEDOLiT FN 4455-55

Forming-oil

Health and Safety
Data Sheet
Documents
Read More...

WEDOLiT FN 4455-55 is a non-water soluble, chlorine free drawing and cutting oil of low viscosity. A combination of EP (Extreme Pressure) additives and inhibitors provide excellent performance for precision cutting operations of steel. WEDOLIT FN 4455-55 forms a separating antifriction film. A direct contact between tool and work piece is avoided. An unobjectionable separation of work-piece can be obtained.

WEDOLiT FN 4455-55 possesses marked boundary lubrication properties. It shows good film stability and possesses a high adhesive capacity. Because of these properties WEDOLIT FN 4455-55 can be used for heaviest metal cutting operations. WEDOLIT FN 4455-55 is free of insoluble pigments such as graphite or molybdenum disulphide.

With respect to the high chemical additivation the corrosion protection depends from the treated material. In preliminary tests the duration of corrosion protection should be determined, when the treated work piece does not consist of high-grade steel. So far the immediate degreasing of the treated surface is recommended.

The oily film can be easily removed with the aid of organic solvents (e.g. petroleum) or water soluble alkaline industrial cleaners.



    WEDOLiT FN 6870-170

    Conventional Forming Oil

    Health and Safety
    Data Sheet
    Documents
    Read More...

    WEDOLiT FN 6870-170 is a medium viscous, water-insoluble lubricant for deep drawing and other cold forming processes of steel (e.g. for auto bodies). Additionally, the product is suitable as a spot lubricant for thread cutting or blind hole drilling. The undiluted product is usually applied by spraying, dipping, brushes or by means of rollers.

    The product meets the requirements of the test procedure according to VDA 230-213.

    • Stable load carrying capacity and a homogenous sliding behavior
    • Reduces friction and wear and thus contributes to a high tool life
    • Outstanding wetting ability and film formation without adhesion
    • Stable cold start behaviour, prevents stick-slip and chatter
    • Leads to clean surfaces and contributes to achieve dimensional accuracy
    • Easily removable with organic solvents or alkaline industrial cleaners


    WEDOLiT FN 8471

    Forming Agent

    Health and Safety
    Data Sheet
    Documents
    Read More...

    WEDOLiT FN 8471 is a pigmented, pasty yet flowable, water-insoluble special lubricant for cold forging operations of ferritic and SiCromAl steels. FN 8471 can also be used for dry expansion, preferably as external lubricant, without additional cooling. The lubricant must be applied by hand over the incoming mandrel bar.

    • Does not contain any chlorine compounds and is based on a well-adhering, temperature-stable mineral oil
    • Special basic pigments are used for the consistency adjustment
    • The special granulation size of the pigments allows an almost wear-free surface despite the high load
    • The extremely high pressure stability combined with exceptionally good adhesion of the lubricant, even on smooth surfaces, allows processes with large cross-sectional reductions
    • When processing Sicromal steels, the lumps must be pre-heated to approx. 200-280° C when entering the pilger machine
    • Strong adhesion and the high temperature stability are of particular importance
    • Pigments which remain after the annealing on the surface need to be removed before further processing by pickling in HCl or HNO3