Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

New Products

TRIM™ GRIND WCS

Boron Free - Carbide Grinding Synthetic

TRIM GRIND WCS minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WCS is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

  • PRTR compliant
  • Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
  • Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks
  • Is not stripped out by conventional filtration systems
  • Operators like GRIND WCS’s clear working solution for superior visibility while grinding
  • Exceptional sump life and good tramp oil rejection for easy skimming
  • Resists oxidation and varnishing
  • Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
  • Very low carryoff equals low fluid makeup costs
  • Easy recycling or disposal with conventional techniques and equipment

TRIM™ E935 bd

Premium Universal Emulsion - Blue Dye

TRIM E935 bd is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 bd makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM™ C290

Economical Synthetic Fluid for Aluminum Machining

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

  • Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
  • Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
  • Provides good results in a wide range of grinding and machining operations
  • Excellent tramp oil rejection
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

Master STAGES™ CLEAN 2021

Washing Compound for Ultrasonic and Immersion Washers

Master STAGES CLEAN 2021 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2021's oil rejecting properties mean longer bath life and economical operation.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
  • Will provide extended in-process tarnish resistance on copper and copper alloy parts
  • Safe on aluminum, aluminum alloy, and magnesium
  • Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve
  • Will remove coolant residues as well as straight oils

Master STAGES™ CLEAN IP 2019s

Silicated Low-foam Cleaner

Master STAGES™ CLEAN IP 2019s

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

  • An excellent cleaner and very economical to use
  • Compatible with aluminum, cast iron, and steel alloys
  • Rejects oil for easy skimming or centrifuging to extend bath life
  • Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
  • Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

TRIM™ E709QNI

Long-life Emulsion

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides good operational life with consistent performance
  • Has a very wide application range allowing its effective use on cutting and grinding
  • Good hard water tolerance
  • Works very well in general machining where traditional soluble oil may not cool sufficiently.
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
  • Good balance of cooling and lubrication to provide good tool life and surface finishes
  • Compatible with most aluminum, steel, cast iron and brass material
  • High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled
  • Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
  • Good cleaning performance keeps machine tools clean
  • Easy recycling or disposal by using conventional techniques and equipment

TRIM™ E935

Premium Universal Emulsion

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM™ HyperSol™ 888NXT

neo-synthetic precision aerospace machining fluid

TRIM™ HyperSol™ 888NXT

Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

U.S. Patent 11,396,708

  • exceptional performance on hard aerospace metals
  • superior lubricity for machining softer aluminum alloys
  • trouble-free production
  • safest, environmentally-friendly ingredients
  • long-running lifespan delivers high customer value
  • less scrap, low foam and low odor

Reversible LIQUI-VAC™

For Sump Cleaning

Reversible LIQUI-VAC™

Removing spent coolants, waste fluids, or oils from machine sumps, reservoirs, or storage tanks is usually just plain bothersome. Inexpensive vacuums will not do a satisfactory job, are quite loud, and are not built for the industrial environment. Now, the Reversible LIQUI-VAC™ provides the solution to your sump cleaning problems. It is small enough to fit in your hand, yet it sucks up tramp oils, used oils, and waste coolants fast and simple. This unit will also discharge fluids out of the drum into a separate container if desired with just the turn of a knob.

Features

  • operates on shop air
  • attaches to small bung on a standard drum
  • has one moving part
  • requires no maintenance
  • has whisper quiet exhaust

The Reversible LIQUI-VAC™ comes in a kit that includes everything you need to start using it the very first day. The standard kit includes:

  • venturi unit
  • 1" x 10' (38mm. X 3 mL) suction hose
  • drum standpipe adapter
  • quick disconnect fittings
  • air control valve
  • safety shut-off valve
  • aluminum wand

MISCO Palm Abbe™ Digital Refractometer

Laboratory Precision in the Palm of Your Hand!

MISCO Palm Abbe™ Digital Refractometer

The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.

    TRIM™ MicroSol™ 690XT

    High-lubricity, Low-foam Premium Semisynthetic

    TRIM™ MicroSol™ 690XT

    TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

    • Dramatically extends useful life without the need for tank-side biocides or fungicides
    • Boron and halogen free
    • Low foaming for todays demanding high-pressure, high-volume applications
    • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
    • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
    • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
    • Provides superior corrosion inhibition on all ferrous and nonferrous metals
    • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
    • Uses standard metalworking recycling and disposal techniques

    TRIM™ OG205

    High-performance Grinding and Honing Oil

    TRIM OG205 is a very-high-specification grinding and honing oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined mineral oil with low aromatic content, which ensures very low levels of mist and high flash point. TRIM OG205 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

    • No reaction with cobalt
    • Very highly refined base oil ensures low mist and high flash point
    • Can be used for light duty universal machining operations
    • Good flushing properties keeps grinding wheels very clean
    • Excellent friction reducing properties ensures long wheel life
    • Excellent heat transferring properties
    • Excellent oxidation stability
    • Highly filterable in pre-coat filter systems
    • Low foaming
    • Kind to machine components and elastomers
    • Light color and low odor for good operator acceptance

    TRIM™ OM 210

    High-performance, Cutting and Grinding Oil

    TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

    • Light color and low odor
    • High flash point
    • Minimal carry over loss
    • Excellent chips flushing and low foam
    • Oxidation inhibited for longer life
    • Excellent tool life properties

    Master STAGES™ Task2™ APC

    All-purpose Cleaner

    Master STAGES™ Task2™ APC

    Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.

    • Use full strength or dilute
    • Versatile all-around shop cleaner
    • Pratt Whitney Aerospace Approval PMC 1455-11
    • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
    • Very low V.O.C. content, and conductivity
    • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
    • Will not harm TRIM metalworking fluids

    TRIM™ DRIVE CF3

    High-performance Fluid for Hard Disk Drives

    TRIM DRIVE CF3 is a specialized, chlorine-free, heavy-duty coolant formulated to meet the high-precision machining and stringent chemical restrictions of the Hard Disk Drive (HDD) industry. It has very good wetting and great lubricity resulting in excellent surface finishes and its ease of wash-ability makes DRIVE CF3 an excellent choice for HDD components manufacturers. TRIM DRIVE CF3 will run in high-pressure situations with little to no foam.

    • In addition to aluminum alloy, it is also suitable for a wide range of materials including steels and stainless steels
    • Low foam even in high-pressure operations without the use of silicone antifoam
    • Good hydrodynamic lubrication to perform reaming and threading applications
    • Excellent anti-weld properties without the use of either chlorinated or sulfurized EP additives
    • Keeps machines very clean while leaving a fluid, oily residue for ease of cleaning and reduced machine maintenance costs
    • Does not require special disposal and is easily recycled
    • Non-staining on aluminum alloys commonly used to produce HDD components
    • After machining, parts can be washed easily and completely in aqueous washing systems

    TRIM™ MicroSol™ 687NXT

    Premium High-lube PRTR Microemulsion

    TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

    • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
    • Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
    • Greatly extends useful life without the need for tank side biocides or fungicides
    • Low foaming for modern high-pressure, high-volume applications
    • Uses standard metalworking recycling and disposal techniques
    • Does not contain any chemical listed under Japan PRTR regulation
    • Provides superior corrosion inhibition on all ferrous metals

    TRIM™ DRIVE G81 NXT

    Premium Cutting Fluid for HDD Manufacturing

    TRIM DRIVE G81 NXT is a specialized, chlorine-free, moderate to heavy duty metal cutting fluid formulated to meet the high-precision machining and stringent chemical restrictions of the Hard Disk Drive (HDD) industry. TRIM DRIVE G81 NXT has very good wetting and lubricity giving excellent surface finishes. Its ease of washability makes TRIM DRIVE G81 NXT an excellent choice for HDD components manufacturers. TRIM DRIVE G81 NXT will run in high-pressure situations with little to no foam.

    • In addition to aluminum alloy, TRIM DRIVE G81 NXT is also suitable for a wide range of materials including steels, titanium, and stainless steels
    • Low foam even in high-pressure operations without the use of silicone antifoam
    • Good hydrodynamic lubrication to perform reaming and threading applications
    • Excellent anti-weld properties without the use of either chlorinated or sulfurized EP additives
    • Does not contain mineral oil for near zero hydrocarbon contamination level
    • Keeps machines very clean while leaving a soft film that protects machine surface, for ease of cleaning and reduced machine maintenance costs
    • Does not require special disposal and is easily recycled
    • Designed to be used with deionize water without having any foam issues
    • Non-staining on aluminum alloys commonly used to produce HDD components
    • Parts machined with TRIM DRIVE G81 NXT can be washed easily and completely in aqueous washing systems

    XYBEX™ ChipOut™

    Chip & Sludge Remover

    XYBEX™ ChipOut™

    A perfect match-up with the PurifierPlus is the XYBEX ChipOut. It is also a compact, easy-to-use, affordable solution for optimizing production. It simply and effectively sucks out the coolant, chips, and swarf to collect and filter all solid impurities and return clean coolant to the tank.

    Get the most from your coolant with ChipOut. It literally pays for itself in no time with significant cost savings.

      XYBEX ChipOut
      • Separates surface debris, bottom chips and swarf, and sediment from coolant
      • Extends coolant life
      • Improves surface finish on parts
      • Reduces maintenance
      • Uses diaphram pump air pressure, no electricity required
      • High suction power, flow rate of 180 liters/min
      • Runs during production without shutting off machine tools
      • Adjustable stainless steel filters: standard mesh 380 microns; optional: 830 microns and 180 microns
      • Optional floating device for maximum tramp oil collection
      • Portable and easy to use with multiple machines
      • Operates with water-soluble coolants or neet oils
      Cost effective ChipOut adds up to big savings
      • Reduces annual coolant cost
      • Reduces expensive parts rejects
      • Reduces maintenance to a minimum

    XYBEX™ ChipOut Plus™

    Magnetic Centrifugal Sludge & Chip Remover

    XYBEX™ ChipOut Plus™

    Looking for a fast, affordable way to have longer coolant life, reduce maintenance, and achieve better machinability and surface finish? Hardworking ChipOut Plus delivers all that and more in a compact, portable system that can hook up to machines throughout the shop.

    It does double time, as both a centrifugal and magnetic separator for water-based cutting fluids or neat oils. It’s simple to use, powerful, and efficient.

    First, the suction hose draws in the liquid and impurities. The filtration bucket traps large impurities before the sludge-containing fluid enters the centrifugal separator where fine particles are separated out by centrifugal force. The sludge then enters the powerful magnetic separator which efficiently removes magnetic metallic shavings and particles. Just like its name implies, it takes out chips - plus more!

      XYBEX ChipOut Plus
      • Separates surface debris, magnetic dust and shavings, chips, swarf, and sediment from coolant
      • Extends coolant life
      • Improves surface finish on parts
      • Reduces maintenance
      • Separates using centrifugal and magnetic force
      • Provides extremely fine filtration
      • No need to stop the machine
      • Quick filtration, easy to operate
      • Portable, use with multiple machines
      • No consumables needed
      Use hardworking, cost effective ChipOut Plus to reduce costs and build profits
      Save time and build up profits with ChipOut Plus.
      • Reduces annual coolant cost
      • Reduces maintenance and manpower
      • Reduces costly parts rejects

    XYBEX™ PurifierPlus™

    Cutting Fluid Purifying System

    XYBEX™ PurifierPlus™

    The portable, cost-effective XYBEX PurifierPlus system pays for itself with material cost savings, reduced downtime and recycling costs. Not only does it enhance production and make the workplace cleaner, it also is better for employee health and the environment.

    Unlike units which simply separate machine tramp oil (the unwanted byproduct of the machining/metalworking process) from coolant, PurifierPlus has an ozone disinfection function which kills bacteria. Not only is the coolant cleaned and lasts longer, it’s purified and reused, and the subsequent problematic stench from bacteria and fungal growth is eliminated.

    Improve production, reduce costs, and experience a cleaner workplace with PurifierPlus.

      XYBEX PurifierPlus
      • Separates free tramp oil and extends coolant life
      • Reduces tool wear and costly parts rejects
      • Easy to use with a handy set-timer to operate on its own
      • Adjustable flow rate filter from 10 to 30 liters/hr
      • Kills bacteria (for best results run 1 hour for each 100 liters in sump; ozone function disinfects at 500 mg/hr)
      • Built-in pH detector (optional) adjusts pH to control range
      • Portable for use on multiple machines in the facility
      PurifierPlus quickly pays for itself in savings
      • Saves 10% to 25% on annual coolant cost
      • Saves 30% to 50% on additional water cost
      • Saves 10% to 25% on tooling costs and part reworks
      • Reduces clean-up time 60% to 80% annually

    TRIM™ C115

    Synthetic

    TRIM™ C115

    TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

    • Does an excellent job in most glass, ceramic, and composite grinding applications
    • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
    • Extremely low carryoff keeps operating costs down
    • Low foam and mist
    • Very low initial odor level which usually disappears after one-to-two days
    • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
    • Exceptional sump life and very good tramp oil rejection

    TRIM™ C270

    High-performance Synthetic

    TRIM™ C270

    TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

    • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
    • Provides excellent corrosion inhibition on all common ferrous alloys
    • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
    • Extremely low carryoff for very low total operation costs
    • Very low foam and mist
    • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
    • Exceptional sump life and very good tramp oil rejection
    • A very low initial odor level which usually disappears after one-to-two days

    TRIM™ C276

    Clean-running Synthetic

    TRIM™ C276

    TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

    • Very low foam and mist
    • Provides excellent corrosion inhibition on all common ferrous alloys
    • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
    • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
    • Extremely low carryoff for very low total operation costs
    • Exceptional sump life and very good tramp oil rejection
    • Low initial charge odor which dissipates further after one or two days
    • Minimizes the buildup of sticky residues

    TRIM™ C350

    Premium Synthetic Metalworking Fluid

    TRIM™ C350

    TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

    • Meets the most stringent nuclear and aerospace chemical content and machining requirements
    • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
    • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
    • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
    • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
    • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
    • Very low carryoff and long sump life results in low operating cost

    TRIM™ C385

    High-lubricity Honing Synthetic

    TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.

    • Very low foam and mist
    • Great for form grinding, honing, boring, rolling, etc
    • Exceptional sump life and very good tramp oil rejection
    • Extremely low carry-off for very low total operating costs
    • Very low initial odor which usually disappears after 1-2 days
    • Compatible with dirty or grey cast iron cutting, grinding, and honing
    • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
    • The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips

    Master STAGES™ CLEAN 2017

    Economical Heavy-duty Spray Cleaner

    Master STAGES™ CLEAN 2017

    Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

    • Very economical way to remove heavy soils and light rust
    • Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
    • Can be recycled using XYBEX equipment
    • Contains no solvents, borates, silicates, nitrites, or amines
    • Long bath life
    • Excellent compatibility with magnesium
    • Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

    Master STAGES™ CLEAN 2029 'One Step'

    Parts Washing Fluid with Corrosion Inhibitor

    Master STAGES™ CLEAN 2029 'One Step'

    Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

    • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
    • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
    • Hard water tolerant, it provides long bath life
    • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
    • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
    • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

    Master STAGES™ CLEAN 2115AL

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2115AL

    Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

    • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
    • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
    • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
    • Provides short-term corrosion inhibition on cast iron and ferrous alloys
    • Excellent biostability
    • Extremely low carryoff keeps operating costs down
    • Low foam and mist
    • Very low initial odor level
    • Exceptional sump life and great tramp oil rejection

    Master STAGES™ CLEAN F2™

    Non-butyl Floor and Multi-purpose Cleaner

    Master STAGES™ CLEAN F2™

    Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

    • With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
    • Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
    • CLEAN F2 has been proven nonirritating to skin at 20% concentration
    • Excellent choice for use in spray bottles up to 20%
    • Use for general cleaning tasks and to remove soils from parts and tools
    • Operators like CLEAN F2's mild, pleasant citrus scent
    • Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
    • Effective mop bucket cleaner
    • Use in floor scrubber machines
    • Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

    TRIM™ E860

    Low-foam, High-lubricity Emulsion

    TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

    • Very wide application range
    • Good hard water tolerance
    • Keeps machine tools clean
    • Works very well in general machining
    • Very stable formula provides good operational life with consistent performance
    • High tramp oil resistance for easy oil removal and longer coolant life
    • Easily recycled or disposed of using conventional techniques and equipment
    • Good balance of cooling and lubrication providing good tool life and surface finishes
    • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
    • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

    HYDRO-BLEND 6180

    Positive Displacement Proportioner

    HYDRO-BLEND 6180

    The HYDRO-BLEND 6180 is a water-driven, positive displacement proportioner, which dispenses coolant on demand at the desired concentration.

    • Concentration control
    • Reduces concentrate waste
    • Easy to install
    • Reliable and consistent
    • Nonelectrical
    • Adjustable

    Yellow Bellied Sump Sucker™ Li'l Sucker™

    Yellow Bellied Sump Sucker™ Li'l Sucker™

    The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.

    • Removes the coolant, sludge, and chips from the sump
    • Filters the sludge and chips from the fluid
    • Returns filtered coolant to the machine tool sump, or
    • Transports the coolant to waste treatment for disposal, or to a XYBEX Recycling System for recycling

    Features

    • Tank capacity of 50 gallons (190 liters)
    • Suction rate up to 85 GPM (320 LPM)
    • Discharge rate up to 40 GPM (150 LPM)
    • 1.6 ft3 (45 dm3) chip basket holding capacity, roughly 12 gallons (45 liters)
    • Available in both air venturi and electric models
    • 120 VAC, single phase, 50 Hz/60 Hz electric model standard
    • 220 VAC, single phase, 50 Hz/60 Hz electric model optional
    • Complete with hoses and straight cleaning tool
    • Optional cleaning tools available
    • Perfect for today's smaller machine tool sumps

      TRIM™ MicroSol™ 455

      Low-foam Ferrous Semisynthetic

      TRIM™ MicroSol™ 455

      TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

      Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

      • Low foaming for today's demanding high-pressure, high-volume applications
      • Also for machining some aluminum alloys and nonferrous metals
      • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
      • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
      • Requires no special disposal or recycling

      TRIM™ MicroSol™ 585XT

      Extended-life, Nonchlorinated Semisynthetic

      TRIM™ MicroSol™ 585XT

      TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

      • Dramatically extends useful life without the need for tank-side biocides or fungicides
      • Low foaming for todays demanding high-pressure, high-volume applications
      • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
      • Optimized combination of cooling and lubricity for titanium machining applications
      • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
      • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
      • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
      • Provides superior corrosion inhibition on all ferrous and nonferrous metals
      • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
      • Uses standard metalworking recycling and disposal techniques

      TRIM™ MicroSol™ 590XT

      Advanced Technology Aerospace Semisynthetic

      TRIM™ MicroSol™ 590XT

      TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

      • Meets the most stringent aerospace specifications and has received many aerospace approvals
      • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
      • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
      • Dramatically extends useful life without the need for tank-side biocides or fungicides
      • Low foaming for todays demanding high-pressure, high-volume applications
      • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
      • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
      • Provides superior corrosion inhibition on all ferrous and nonferrous metals
      • Keeps parts and machines very clean to reduce maintenance and production time

      TRIM™ OM350C

      Heavy-duty Cutting Oil

      TRIM OM350C is a heavy duty, mineral oil based cutting oil formulated with high performance synthetic ester-based additives. It can be used for a variety of metal cutting and grinding processing, especially suitable for steel broaching. This product is also suitable for tapping, milling, and reaming processes. Also suitable for multi metal applications such as copper alloy, aluminum alloy, and heat-treated steel.

      • Excellent extreme pressure lubrication, inhibiting BUE generated, providing an excellent surface finish
      • Provides excellent lubrication and cooling for machining deep holes
      • Low oil mist, low volatility, maintains a clean working environment

      TRIM™ SC310

      Microemulsion Semisynthetic

      TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

      • Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
      • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
      • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
      • Has exceptional sump life and very low makeup for extremely low total operating cost
      • Low odor and mist makes for an operator-friendly product
      • Extremely effective EP additive package
      • Contains no nitrites, heavy metals, phenolic compounds
      • Easy recycling or disposal with conventional techniques and equipment

      TRIM™ SC410

      Chlorine-free Semisynthetic Coolant

      TRIM™ SC410

      5 drum minimum batch order size. Pricing and delivery available upon request.

      TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

      • Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
      • Low foaming in most operations
      • Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
      • Will provide superior sump life and corrosion inhibition for long periods of time without adds
      • Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
      • Will keep the machine and work environment clean even when machining or grinding gray iron
      • Contains no chlorine or sulfur-based additives
      • Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
      • Very low carryoff and long sump life, delivering low operating costs
      • Hard water tolerant up to 30 grains

      TRIM™ SC639

      General Purpose Semisynthetic

      TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

      • Provides excellent lubricity for various machining applications
      • Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining
      • Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
      • Long sump life and low coolant consumption that reduce the cost for user
      • Low odor and mist that provides a good working environment
      • Good hard water tolerance up to 40 grain
      • Easy recycling or disposal with conventional techniques and equipment

      Tramp Oil Terminator™

      Portable Centrifuge Unit for Removing Emulsified Tramp Oils

      Tramp Oil Terminator™

      Developed to meet the needs of the small metalworking plant for a compact, portable, high-speed centrifuge, tramp oil separator, the Tramp Oil Terminator™ will process both water-miscible coolants and aqueous cleaners to remove free and emulsified tramp oils, providing clean and reusable coolants and cleaners. Removing tramp oils (hydraulic oils, way lubes or any undesirable oil) from coolants and cleaners removes a food source for bacteria, reduces undesirable residues, and reduces smoke and oil mist in the shop atmosphere.

      Benefits

      • Extended life of coolants and cleaners
      • Improved machining
      • Longer tool life

      Features

      • Compact and portable for machine tool sumps and parts washers
      • Simple operation
      • High-speed, disc-bowl centrifuge
      • Stainless-steel hood and bowl
      • Built-in clean fluid centripetal discharge pump
      • Easy dismantling of bowl for cleaning
      • Quick disconnects on feed and discharge
      • Strainer and 50 micron cleanable pre-filter
      • Air pump and floating skimmer for feed
      • Automatic shut off when tramp oil collection tank is full

        Master STAGES™ Whamex™

        Machine Tool Sump and System Cleaner

        Master STAGES™ Whamex™

        Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

        • A very specialized formula that draws many years of hands-on experience in machine clean outs
        • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
        • Very hard water tolerant allowing it to be effective in raw water or used coolant
        • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
        • When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
        • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

        WEDOLiT FN 6160-90

        High performance forming oil

        WEDOLiT FN 6160-90 is a water-insoluble, chlorinated lubricant for deep drawing and other cold forming operations, e.g. wire drawing, extrusion, or thread forming of steel and stainless steel. The undiluted product is usually applied by flooding, spraying, brushes, or by means of rollers.

        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • Outstanding wetting ability and film formation without adhesion
        • Stable cold start behavior, prevents stick-slip and chatter
        • Leads to clean surfaces and contributes to achieve dimensional accuracy
        • Easily removable with organic solvents or alkaline industrial cleaners

        WEDOLiT FN 8830

        Special forming oil

        WEDOLiT FN 8830 is a chlorine free, pasty, water-insoluble lubricant for cold forming processes (e.g. pilgering) of high alloyed steels. The product is usually applied on the outer diameter by brushes or by means of rollers.

        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • The outstanding extreme-pressure properties combined with an exceptional adhesion offers the possibility for high degrees of deformation
        • Stable cold start behavior, prevents stick-slip and chatter
        • Contributes to achieving dimensional accuracy
        • Pigments will remain on the surface after annealing and need to be removed (e.g. by pickling with HCl or HNO3) before further processing

        WEDOLiT CS 8208

        Water-miscible, fully synthetic coolant

        WEDOLiT CS 8208 is suitable for ultrasonic testing systems. The product is also suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 5 - 10%). Not suitable for the manufacturing of workpieces made of zinc, aluminum and their alloys.

        • Offers high cooling- and flushing properties with a very good wetting behavior
        • Contributes to a high tool life
        • Very good application stability
        • Almost free of foam
        • Offers a good skin compatibility
        • Due to its thermal stability, the product can be used in almost the whole process chain of welded tubes (forming, welding, calibration, sawing)

        WEDOLiT FN 1190-2300

        High-performance forming oil

        WEDOLiT FN 1190-2300 is a highly viscous, chlorine containing forming oil for tube drawing and other cold forming operations of stainless steel. The undiluted product is usually applied by brushes or by means of rollers.

        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • Outstanding wetting ability and film formation without adhesion
        • Stable cold start behavior, prevents stick-slip and chatter
        • Leads to clean surfaces and contributes to achieving dimensional accuracy
        • Easily removable with organic solvents or alkaline industrial cleaners
        • Soluble in chlorinated hydrocarbons

        WEDOLiT FN 1571-2800

        Drawing Brass and Copper Tubes

        WEDOLiT FN 1571-2800 is a highly viscous, water-insoluble lubricant for tube drawing and other cold forming processes of aluminum and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • Outstanding wetting ability and film formation without adhesion
        • Stable cold start behavior, prevents stick-slip and chatter
        • Leads to clean surfaces and contributes to achieve dimensional accuracy
        • Easily removable with organic solvents or alkaline industrial cleaners
        • Evaporates at temperatures T ≥ 572°F, (300°C) without leaving any residues or stains on the metal surface. Therefore, no preliminary degreasing is necessary before a potential soft annealing

        WEDOLiT FN 8850-90

        Drawing small diameter tubes, diesel injection

        WEDOLiT FN 8850-90 is a medium viscous, water-insoluble lubricant for tube drawing and other cold forming operations of steel. Due to the fact that the product also offers corrosion protection, no additional treatment is necessary (for short term storage). The undiluted product is usually applied by spraying, brushes, or by means of rollers.

        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • Outstanding wetting ability and film formation without adhesion
        • Stable cold start behavior, prevents stick-slip and chatter
        • Leads to clean surfaces and contributes to achieving dimensional accuracy
        • Easily removable with organic solvents or alkaline industrial cleaners

        WEDOLiT FS 4710

        Solvent base for aluminum stamping 158°F (70°C)

        WEDOLiT FS 4710 is a low viscous, solvent-based lubricant for stamping and forming operations of steel, aluminum and non-ferrous metals. The undiluted product is usually applied by spraying, flooding, brushes, or by means of rollers.

        • Good spreading behavior, which leads to a uniform wetting of the metal surface
        • Stable load carrying capacity and a homogenous sliding behavior
        • Reduces friction and wear and thus contributes to a high tool life
        • Leads to clean surfaces and contributes to achieving dimensional accuracy
        • If the product is finely dispersed, it evaporates after a short time without leaving any residue. Therefore, an additional cleaning step is not necessary. Otherwise, it is easily removable with organic solvents or alkaline industrial cleaners

        WEDOLiT FW 1960

        Soap for tube drawing operations

        WEDOLiT FW 1960 is a water-soluble alkaline soap for heavy drawing operations of steel tubes. The product is usually used as an immersion bath (bath temperature 167 - 194 °F, (75 – 90 °C)).

        • The product is designed to react with the zinc phosphate layer (which acts as lubricant) to form a zinc soap. The zinc phosphate layer should be at least 4 μm (at heavy forming operations, e.g. cold extrusion, up to 10 μm). Due to specific additives, a maximum conversion of zinc phosphate and the drawing media occurs, which results in an optimal performance regarding degree and rate of deformation
        • Can be used in very low concentrations of 5 - 10% as an aqueous solution (tube drawing). The best results are obtained with water free media
        • Offers (in combination with a zinc phosphate layer) very high cross-sectional reduction and high drawing velocities – up to 100 m/min (steel tubes with standard cross-sectional reduction)

        Mini TOT™ Tramp Oil Terminator™

        Portable Centrifuge

        Mini TOT™ Tramp Oil Terminator™

        The Mini TOT is a compact, portable, high-speed centrifuge, tramp oil separator that is perfect for small metalworking plants.

        The Mini TOT processes watermiscible coolants and aqueous cleaners, removing free and emulsified tramp oil to produce clean, reusable coolant and cleaners. Removing tramp oil (hydraulic oil, way lubes, or any undesirable oil) from coolant and cleaners eliminates a food source for bacteria, reduces undesirable residues, and reduces smoke and oil mist in the shop atmosphere.

        • compact and portable for machine tool sumps and parts washers
        • simple operation
        • high-speed, disc-bowl centrifuge
        • stainless steel bowl
        • built-in clean fluid centripetal discharge pump
        • easy dismantling of bowl for cleaning
        • quick disconnects on feed and discharge
        • strainer and 50-micron cleanable prefilter
        • air pump and floating skimmer for feed
        • automatic shut-off when tramp oil collection tank is full