Master Fluid Solutions - Cutting Edge Metalworking Solutions

Global HVAC Industry Leader Cuts Production Costs With TRIM<sup>®</sup> MicroSol<sup>®</sup> 692XT
Global HVAC Industry Leader Cuts Production Costs With TRIM® MicroSol® 692XT

Our customer is a manufacturer recognized as a global leader in the field of high-precision metal components, especially those with single-digit micron tolerances. The company has over a dozen facilities worldwide and provides components for several industries, including automotive, HVAC, consumer goods, and fluid power.

THE CHALLENGE

THE SOLUTION

The customer has three drill machines dedicated to manufacturing metal shafts for compressors. The machines required 10 gallons of makeup coolant per day to maintain proper concentrations, leading to a high consumption rate and coolant costs. From past experience, the shop floor manager was aware the cutting tools were not lasting as long as they should. So, the company approached Master Fluid Solutions to find a cost-effective way to mitigate coolant makeup rates and extend tool life.

After an on-site consultation and review with a Master Fluid Solutions district sales manager, the customer took advantage of our FIRST CHARGE NO CHARGE® Program and began a one month trial of TRIM® MicroSol® 692XT. The high-lubricity, semisynthetic, microemulsion coolant was perfectly suited to materials they were machining. This next-generation formulation provides greater biostability and foam control while extending sump life compared to the semisynthetic microemulsions of the past. Immediately, the customer discovered that MicroSol® 692XT maintained proper coolant concentrations with half the amount required by their previous cutting fluid.

THE RESULTS

After upgrading from their previous cutting fluid to TRIM® MicroSol® 692XT, the coolant makeup rate was cut by 50%, and the customer went from using 10 gallons of coolant to only 5. With MicroSol® 692XT as their coolant, tool life was increased substantially. The company only had to change tools 813 times per year, down from 1,083, a 25% decrease. By extending tool life, each drill processed 800 metal shafts before needing replacement, compared to 600 with their previous coolant solution.
These factors contributed to a massive increase in productivity with substantial cost savings. Total cost per part was reduced to $0.2114, down from $0.2310. This brought annual costs of production down to $142,688 from $156,807. Though TRIM® MicroSol® 692XT costs more than the company’s previous coolant solution, the increased productivity and lower production costs translated to $14,119 in savings annually.

THE NUMBERS

•
50% reduction in coolant application rates

•
8.48% reduction in cost per part

•
25% extended tool life

•
$14,119 in annual savings

©2021 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2021-2-23

MicroSol^® 692XT Cuts Cost

WEDOLiT™ FW 9200 Replaces All

Global Automotive Parts Manufacturer Eliminates Corrosion With WEDOLiT™ AN 7210
Global Automotive Parts Manufacturer Eliminates Corrosion With WEDOLiT™ AN 7210

As a global automotive parts manufacturer, the customer’s production line processes metals and alloys — including numerous steel grades — for automakers and their suppliers around the world.

THE CHALLENGE

THE SOLUTION

The customer’s products need to be treated with anti-corrosion solutions to prevent degradation during shipping, especially when sent overseas with long transit times. Due to the various metal and alloy types that the customer works with, solutions are limited to those designed to be compatible with a wide array of workpieces. Also, as the customer ships worldwide, products require protection to sustain extreme temperature ranges.
The customer’s previous anti-corrosion product frequently failed, resulting in a high damage rate. Corrosion was found to occur during international transport and interim storage at recipients’ facilities, especially within unheated hallways.
The customer’s previous corrosion preventative also contained a high concentration of Volatile Organic Compounds (VOCs) hindering their sustainability and eco-friendly efforts as a business.

The customer began a trial of WEDOLiT™ AN 7210, a high technology corrosion inhibitor that works well with steel and other metals and alloys. AN 7210 offers long-term protection for indoor storage and the low viscosity makes it suitable for use in sprayers or as an immersion bath (for hollow parts). It’s specially formulated to prevent corrosion during overseas transport and is free of VOCs, allowing customers to minimize their environmental footprint.

THE RESULTS

THE NUMBERS

The customer experienced immediate cost savings when switching to WEDOLiT AN 7210. The high-quality product required less solution than the customer’s previous anti-corrosion product, translating into a 10 percent reduction in overall consumption.
Productivity was also increased because the corrosion preventative no longer had to be applied manually. The lower viscosity formulation allowed the product to be sprayed, making for a more efficient application. What’s more, the elimination of VOCs allowed the company to better align with its environmental protection commitment.
Finally, customer complaints were noticeably reduced to less than 2 percent as shipments no longer arrived damaged and the low-odor formula became less of a nuisance.

•
10% reduction in overall consumption and future order quantities

•
Significantly reduced production time through the automation of the application process

•
Customer complaint volume was reduced to less than 2%

©2021 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2021-02-01

WEDOLiT AN 7210 Eliminates Corrosion

Driveshaft Manufacturer Drastically Reduces Costs and Filter Bag Use with Master Fluid Solutions

Driveshaft Manufacturer Drastically Reduces Costs and Filter Bag Use with Master Fluid Solutions

A quality automotive part, particularly something like a driveshaft, helps ensure that drivers return home safely. In auto repair, both original equipment manufacturer (OEM) and aftermarket parts are used, and these parts need to meet certain specifications regardless of the price paid by the consumer.
A driveshaft manufacturer, who manufactures both OEM and aftermarket driveline components, needs their parts to perform well in commercial and off-road vehicles, as well as in industrial applications.
From their manufacturing headquarters in the Midwest, they conduct turning and milling operations on steel, aluminum, and carbon fiber. The company operates over 50 metalworking machines to manufacture driveshafts, driveline components, and universal joints for OEM automotive, agriculture, and off-road vehicles.

THE CHALLENGE

THE SOLUTION

The driveshaft manufacturer was currently using a coolant which had poor sump life and was causing rusting and residue issues. The rusting, in particular, was a big concern for the company, as was the heavy, green residue buildup on tool holders, doors, and walls. They decided to search for a new coolant, hoping to resolve these issues.

TRIM® MicroSol® 585XT was chosen to replace two different coolants that they were using. This is a high-lubricity, semisynthetic, microemulsion coolant that is ideal for a variety of materials, including all the materials commonly used in the manufacturing of driveline components that the manufacturer works with on a daily basis. Additionally, MicroSol 585XT helps inhibit corrosion and keeps the machines clean, leaving only a soft film that can be easily removed during routine cleaning and maintenance.

THE RESULTS

After switching to MicroSol 585XT in February 2020, the manufacturer immediately noticed a significant reduction in the filter bags they used – down to two per month, from 19 with the previous coolants. Additionally, there was no more heavy, green residue on the machinery or rusting issues.
Due to the success of switching to MicroSol 585XT, the driveshaft manufacturer is planning to test additional products from Master Fluid Solutions. Additionally, the success is proving to be a driving force for many other improvement projects across their metalworking shop floor.

THE NUMBERS

•
90% reduction in filter bags used

•
50+ machines in operation

•
5,000-gallon central system

©2021 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2021-01-29

90% Filter Bag Reduction

WEDOLiT™ AN 7321 Eliminated Need for VCI Packaging
WEDOLiT™ AN 7321 Eliminated Need for VCI Packaging

The customer is an international parts manufacturer serving automakers and their suppliers worldwide. The company operates multiple production lines that process an extensive array of materials, ranging from unalloyed and low-alloyed to high-alloyed steels.

THE CHALLENGE

THE SOLUTION

The customer’s products are shipped overseas to environments that include extreme high and low temperatures — and these conditions make them vulnerable to corrosion. Despite using high-quality protective volatile corrosion inhibitor (VCI) packaging, products still suffered from high damage rates due to corrosion.
The items that arrived undamaged would frequently corrode during interim storage, especially in facilities with unheated hallways. The previous anti-corrosion solution left materials prone to under-rusting, creating smoke when applied on parts still warm from the production line.
Additionally, due to the variety of metals and alloys the customer worked with, it was a challenge to find a corrosion protection formula that could be universally applied.

The customer began a trial of WEDOLiT™ AN 7321 anti-corrosion oil. It works by forming a non-hazardous and non-toxic oil film on the metal surface to provide protection against weather, moisture, and extreme temperatures.
Additionally, the flashpoint of AN 7321 is higher than 195°C, making it adept at preventing corrosion in the most extreme temperatures and offers several months of protection for indoor storage.

THE RESULTS

After converting to WEDOLiT AN 7321, complaints from overseas customers dropped to less than 10 percent, a significant decrease from the high damage rate and dissatisfaction from the previous competitor product used.
Plus, AN 7321 created significantly less smoke than the customer’s previous product when applied to warm workpieces, allowing employees to maintain productivity without affecting air quality inside the workshop.
WEDOLiT AN 7321 offers strong enough protection that VCI components are no longer needed. The non-hazardous formula is more beneficial for workers as well.
Since the trial, nearly every production line has switched to WEDOLiT.

THE NUMBERS

•
Lowered customer complaint rate to under 10%

•
100% reduction in the necessity of VCI packaging

•
Significantly reduced smoke produced in workshop

©2021 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2021-1-29

VCI Packaging Not Needed

Mechanical Parts & Tool Manufacturer Reduces Coolant Spend by 55% with TRIM<sup>®</sup>

Mechanical Parts & Tool Manufacturer Reduces Coolant Spend by 55% with TRIM®

For over 100 years, the customer has produced high-quality motors, industrial tools, and solenoids for a variety of industries. The manufacturer prides itself on using the latest technology to deliver orders to specifications and meet OEM requirements, and all components are manufactured in its 100,000 square foot facility in the Midwest. It primarily works with aluminums, stainless steels, and steels on various machining centers.

THE CHALLENGE

THE SOLUTION

The customer had to use high concentrations of its existing coolant to achieve acceptable tool life and surface finishes. However, this meant using more coolant than necessary, driving up costs and leaving sticky residues on machines that required regular cleaning. Additionally, the coolant supplier didn’t provide support for mitigating these issues.
They considered purchasing expensive coolant recycling equipment, hoping the investment would pay for itself. Unfortunately, projections indicated there would be little ROI, and the maintenance of the equipment could outweigh the savings.

After meeting with Master Fluid Solutions representatives, the customer recharged its sumps with TRIM® MicroSol® 585XT, a high-lubricity, semi-synthetic, microemulsion coolant, which is more suited to their multi-metal machining operations. TRIM® MicroSol® 585XT also requires lower recommended concentrations and lower makeup rates than their existing coolant which could help lower costs.

THE RESULTS

THE NUMBERS

After the switch to higher-quality TRIM® MicroSol® 585XT, coolant use decreased sharply (by 360 gallons annually) because it requires less frequent charging and disposal. Though TRIM® MicroSol® 585XT is 15 percent more expensive than their current product, the customer is expected to save over $7,800, or 55%, per year in coolant spending, and has improved tool life and finishes when machining aluminum.
By choosing Master Fluid Solutions’ coolant, they avoided capital and maintenance expenses related to purchasing new equipment. After receiving free product for testing, and assistance from Master Fluid Solutions in cleaning and recharging two of their machines, the customer grew interested in learning more about other Master Fluid Solutions’ products. A free one-gallon trial of Master Stages Skramex immediately proved to have more cleaning power at lower concentrations than their current floor cleaning solution, resulting in the company converting to this product as well.

•
360 gallon decrease in annual

coolant use
•
55% decrease in coolant spending

•
$7,816 in annual savings

•
Increased tool life

©2021 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2021-1-27

Reduced Coolant Spend by 55%

Steel Plant Celebrates 20 Years Without Product Corrosion Due to WEDOLiT AS 2603
Steel Plant Celebrates 20 Years Without Product Corrosion Due to WEDOLiT AS 2603

The customer is a globally recognized mechanical engineering plant specializing in the manufacturing of large steel parts for industrial concrete products. The company serves markets in all climates across the world, including the United States, Canada, Vietnam, Australia, and the United Arab Emirates.

THE CHALLENGE

THE SOLUTION

The plant ships and stores large steel workpieces (ranging in size from 10-15m.) overseas through incredibly diverse climates and environments, with temperatures ranging from as low as -30°C to as high as 40°C and above.
Workpieces must be treated with an anti-corrosion solution to prevent degradation while transported and stored in extreme temperatures. The customer’s previous solution was unsuccessful, resulting in high damage rates during shipping and issues with pitting corrosion from long-term storage.

In 1999, the customer switched to using WEDOLiT AS 2603, a solvent-containing, high-protection wax-dispersion fluid ideal for providing corrosion protection for steel parts during overseas transport. After forming a protective film on the metal surface, the anti-corrosion agent protects against atmospheric contaminants such as dissolved gases.
AS 2603 was formulated with an innovative thixotropic solution designed to provide protection for extended periods without risking corrosion from high or low temperatures. As a universal solution, it was also compatible with the customer’s existing spraying units.

THE RESULTS

Since switching to WEDOLiT AS 2603 more than two decades ago, the customer has been able to transport large workpieces to every continent and type of climate in the world without corrosion issues. The solution also prevented corrosion on parts stored in suboptimal conditions for extended periods.
In the two decades since converting to WEDOLiT AS 2603, the customer has tested 42 competitor products but still hasn’t found anything better than or even comparable to this Master Fluid Solutions’ product.
Preventing corrosion has allowed the customer to drastically increase profits by mitigating costly workpiece damage, replacement, and reshipping. As the customer launches new production lines, estimates indicate that current revenues will increase by 100 percent.

THE NUMBERS

•
20+ years of overseas shipping and storage in extreme temperatures with no corrosion

•
AS 2603 proved to perform better than 42 competitor products

•
Estimated 100% increase in revenues due to cost-savings from well-protected parts

©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-11-16

20 Years, No Corrosion

Lakshmi Machine Works Slashes Coolant Spend by 32% with Master Fluid Solutions

Lakshmi Machine Works Slashes Coolant Spend by 32% with Master Fluid Solutions

The textiles and apparel industry is the second-largest employer in India, with 45 million workers. It comprises 13% of the country’s export earnings, with anticipated 28% annual growth through 2021. As a critical component of the Indian economy, textile manufacturers need to know their machines are reliable.
Lakshmi Machine Works Limited (LMW) produces the machines that power this economic sector. It’s the largest manufacturer of textile machines, and it works primarily with steels and grey irons. The company provides the latest spinning technology to Indian textile mills, and it also produces CNC machine tools.

THE CHALLENGE

THE SOLUTION

Grey iron poses challenges to metalworking shops due to its propensity to rust. It also causes some coolant emulsions to fail quickly, change colors, leave heavy residue on machines, and develop rancid odors.
In particular, if LMW let a machine sit idle for a few days, the odor from its incumbent coolant would be overpowering upon startup. The coolant formed residue buildup on sensors, which caused the machine to malfunction and necessitated unplanned maintenance. The poor coolant performance not only required cleaning out sumps every six months, but would also create rust issues on parts, requiring downtime and extra steps to create usable parts.

LMW chose Master Fluid Solutions’ TRIM™ SC9030SGM, a high-oil semisynthetic coolant designed to inhibit corrosion on ferrous and nonferrous metals. This fluid can resist the “smutting” that results from machining cast irons and reduce residue formation. Additionally, TRIM SC9030SGM helps keep machines clean and eliminates rancid odors.

THE RESULTS

THE NUMBERS

After the switch to TRIM SC9030SGM, sump life increased by 50%, from six months to 9 months. The new coolant eliminated rust issues and drastically reduced smutting, resulting in cleaner machines. LMW was able to reduce the amount of concentration used, resulting in a 32.2% cost savings for coolant. And because it didn’t need to clean machines and change over the coolant as often, LMW decreased its downtime by 30%.
In addition, LMW created better working conditions for the operators by eradicating rancid odors. Fewer parts need to be rejected due to rust, and sensor failures due to residue buildup are no longer an issue.

•
50% increase in sump life

•
32.2% decrease in coolant spend

•
30% reduction in downtime

©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-11-5

Reduced Coolant Spend by 32%

Steel Tube Manufacturer Halves Dewatering Process Time with WEDOLiT AS 1012 Steel Tube Manufacturer Halves Dewatering
Process Time with WEDOLiT AS 1012
A global steel tube manufacturer that has seven plants across Europe and America, has been operating for
over a century producing tailor-made tube products for the energy and automotive sectors. The seamless and
welded tubes they manufacture need short-term corrosion protection to ensure that no corrosion occurs during
the entire process chain.
THE CHALLENGE THE SOLUTION
THE RESULTS
THE NUMBERS
In the past, the tube manufacturer has changed the
dewatering fluid it used multiple times due to problems
with the performance. It also required a premium
quality fluid that could cope with the high-volume
throughput in its 706-cubic foot immersion bath.
The manufacturer wasn’t fully convinced — even after
their laboratory tests showed outstanding product
performance from the WEDOLiT range — as they didn’t
believe that any technology could be better than the
one they were currently using.
As a result, the manufacturer trialed WEDOLiT AS 1012,
a leading-edge dewatering fluid which uses surfaceactive
substances to displace both water and emulsions
from the metal surface extremely quickly and has
corrosion protection properties.
After evaporation of the solvent, a thin non-adhesive
protective film remains on the surface, which offers
corrosion protection for short-term to intermediate
storage. Any water or emulsions that enter the bath
settle on the bottom of the tank after a short period of
time, and can then be drained off.
Using WEDOLiT AS 1012, the dewatering time
significantly reduced from less than 10 seconds to
less than 5 seconds. As a bonus, the length of the
short-term indoor storage corrosion protection also
drastically improved from a few days to more than
three weeks.
The manufacturer was so impressed with the results
that it has started running trials of other products from
the WEDOLiT range throughout the plant.
For this steel tube manufacturer, opening the door
to Master Fluid Solutions and their technologically
advanced WEDOLiT products has proved beneficial.
• Reduced dewatering time by 50%
• Increased corrosion protection from a few days
to more than 3 weeks
• Doubled possible throughput of immersion bath
©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-07-28

Reduced dewatering time by 50%

Drivetrain Components Manufacturer Reduces Coolant Spending by $186K with Master Fluid Solutions ©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-06-18
A drivetrain components manufacturer, specializing in automotive torque converters, primarily engages in turning
applications with steel alloy. It operates three large central coolant systems: one at 30,000 gallons, one at 20,000 gallons,
and one at 10,000 gallons. There are 100, 50, and 30 machines on each system, respectively. Its primary customers are
large automotive manufacturers across the United States.
THE CHALLENGE THE SOLUTION
THE RESULTS THE NUMBERS
In addition to the age-old cost reduction
challenges, the components manufacturer
was also faced with sump life and service life
issues on its machines. Its incumbent fluid
resulted in too much foam, smoke in the air,
and residue all over the machines.
The company decided it was time to reevaluate
its entire fluid program to tackle
these issues and reduce the amount of
metalworking fluid it used. Any fluid it chose
would need to be operator-friendly, as well
as have a long life in the sump. Changing out
the central systems can shut down the entire
plant because of the size and number of
machines connected to them.
The components manufacturer brought in three different metalworking fluid
providers to run 60-day tests on its systems. Master Fluid Solutions’ TRIM®
SC620 performed well in the test but also offered significant cost savings in
the long run.
TRIM® SC620 is a low-foam, semisynthetic coolant that is ideal for high-speed
milling and turning applications. It provides a long service life, long sump
life, and is low-maintenance, which is critical for central systems like the one
running at the components manufacturer’s facility.
Master Fluid Solutions also provided tramp oil removal systems, and
continuously conducts weekly coolant sampling and laboratory evaluations.
Based on the results of these reports, Master Fluid Solutions adjusts the
coolant. Master Fluid Solutions includes this maintenance as a value-add to
help its customers better manage their coolant usage and spending.
After switching over to TRIM® SC620, the
components manufacturer saw a massive
decrease in coolant spending, going from
$386,000 to $200,000 annually, a 48%
savings. Additionally, the company saw
a 22% increase in tool life, an improved
surface finish on the final product, and clean
machines, without foaming or smoke in the
air.
Thanks to Master Fluid Solutions, the
components manufacturer has achieved its
goal of cost savings and improved both the
work environment and the finished product.
• $186,000 saved annually
• 48% reduction in coolant spending
• 22% increase in tool life
Drivetrain Components Manufacturer Reduces
Coolant Spending by $186K with Master Fluid
Solutions

$186,000 saved annually

RBC de Mexico Vastly Improves Processes, Cuts Costs with Master Fluid Solutions RBC de Mexico Vastly Improves Processes,
Cuts Costs with Master Fluid Solutions
©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-06-05
RBC de Mexico, RBC Bearings’ Reynosa plant, primarily machines steel and stainless steel for aerospace, automotive, and
industrial customers. The location also handles some aluminum and harder to machine metals, and works on thousands
of different parts and models. RBC de Mexico is a major turning facility owned by RBC Bearings and operates 24 hours a
day, seven days a week, for 340 days out of the year, requiring long-lasting, durable coolant.
THE CHALLENGE THE SOLUTION
THE RESULTS
As is the case with a lot of metalworking shops, RBC de
Mexico wanted to extend sump life, cut coolant costs, and
properly maintain its coolant. Several years ago, the company
struggled with dirty sumps, rust issues, and rancid coolant
odors. The sump was full of bacteria and a health risk to
workers. RBC de Mexico wanted a better-quality coolant at
a reasonable price, as its incumbent provider was overpriced
and not effective.
However, the engineering team met with some resistance
internally when wanting to bring in new vendors to test
different fluids. Some were skeptical that a new coolant
could make a difference, and the engineering team had their
work cut out, not only to prove that there would be ROI from
switching to a new coolant, but also that a new vendor could
help improve RBC de Mexico’s processes.
RBC de Mexico began an active search for a new coolant.
Ultimately, the plant brought in Master Fluid Solutions. TRIM®
MicroSol® 585XT was chosen for its machining operations,
and Master Fluid Solutions also provided actionable
recommendations on how to improve conditions on the floor,
like installing skimmers on each machine to remove tramp
oil and using water filters and smog hogs. Master Fluid
Solutions impressed the team at RBC de Mexico with its deep
knowledge of metalworking, and was one of the few vendors
willing to travel to Reynosa to tour the plant, demonstrating the
company’s commitment to supporting RBC de Mexico during
and after the transition.
After almost two years of using TRIM® MicroSol® 585XT, RBC
de Mexico has achieved approximately $150,000 in overall
savings, including what it has saved in coolant costs due to the
fluid lasting longer in the sump.
However, the real value has come in the form of process
improvements that have led to a much cleaner facility. The
sumps are cleaner than ever before, meaning less bacteria
and less health risks for the workers. Installing the skimmers
has reduced the amount of tramp oil in the sumps, drastically
reducing the smoke that would accumulate over the machines
and increasing the life of the sumps — and smog hogs take
care of the rest.
RBC de Mexico has had such good results partnering with
Master Fluid Solutions that it now plans to implement a
coolant recycling program to save even more money. For the
Reynosa plant, not only were they able to reduce costs and
improve their operations, but they also found a trusted partner
in Master Fluid Solutions to guide them through the process.
“The service and product knowledge from Master Fluid
Solutions is far superior than anything we had received
from any of the other companies we had talked to. Their
patience and determination helped everything fall into
place.”
-John Taylor, Engineering Supervisor

$150,000 Saved!

Wilson Tool Finds the Formula for Worker Health & Safety with Master Fluid Solutions Wilson Tool Finds the Formula for Worker
Health & Safety with Master Fluid Solutions
Global custom tooling company Wilson Tool International provides a complete line of tooling products
for the additive, tableting, stamping, bending, and punching industries. From the louvers on the back of a
microwave to the back panel of a computer server, if a company needs something to stamp out different
forms, Wilson Tool likely makes it.
THE CHALLENGE
THE SOLUTION
THE RESULTS
Wilson Tool provides parts to a wide variety of industries,
from automotive to information technology. Parts have to be
delivered to specifications, with very low tolerance for error.
Nothing can be delivered with scratches or dents, and fluids
play a large role in ensuring that Wilson Tool’s products
meet its customers’ exacting standards.
To meet its different metalworking application needs, Wilson
Tool purchases three different fluids from Master Fluid
Solutions that can be adapted to different applications.
TRIM® OGR 263 is the straight oil solution that Wilson
Tool uses, along with TRIM® C270 for grinding and TRIM®
MicroSol® 690XT.
Additionally, worker health and safety can’t be overstated.
Employees spend a lot of time in contact with the
different fluids for milling, cutting, and other metalworking
applications. Regardless of whether the fluid is oil-based,
water-based, or pure oil, it needs to minimize dermatitis
cases.
Wilson Tool has dramatically reduced coolant waste and
dermatitis cases on its production floor. The company uses
8,000-gallon tanks to run coolant through its three systems
and the coolant lasts at least seven years before it needs
to be cleaned out and recharged. The most recent system
Wilson Tool cleaned out had been running smoothly for 17
years. Going so long between system cleanouts means
less waste is created which equates to a savings of roughly
$35,000 every time it can be skipped.
With 400 people at its St. Paul, Minnesota facility, it’s very
rare that even a single case of dermatitis is reported. While
coolant cost and longevity is important, healthy employees
have a major effect on the bottom line, too.
©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-05-07
“Master Fluid Solutions built a coolant that we can
recycle and send back through our machines,
and all improvements were made by them.
We’ve built a good relationship, and they’re an
important partner of ours.”
– Duane Berg, Maintenance and Facilities Manager

Coolant Waste Dramatically Reduced

Aerospace Components Supplier Resolves Contamination using Master Fluid Solutions Aerospace Components Supplier Resolves
Contamination using Master Fluid Solutions
As a leading supplier of aerospace components, contamination is a serious problem. One UK-based
supplier that performs milling, turning, drilling, and tapping operations at its facility had to face such
an issue. This supplier machines aerospace-grade aluminum, with 19 machines in total consisting of
mills, machining centers, and lathes. The aerospace industry requires a precision operation, while also
minimizing downtime for the machines.
THE CHALLENGE THE SOLUTION
THE RESULTS
The aerospace components supplier encountered a problem controlling
bacterial contamination in its metalworking fluid. This meant it had to conduct
regular machine cleans of approximately two to three machines per month. It
took half a day to clean and refill the machines and the lost machine time cost
$76 per hour.
The existing metalworking fluid also periodically caused machining issues.
The machines would tap oversize holes, which meant those component parts
would have to be completely scrapped. Each scrapped component resulted in
a $2,330 loss.
Weary of losing more money
and productivity, the aerospace
components supplier agreed to a
six-week trial of TRIM® E715, run at
6% to 10% concentration. TRIM E715
is a universal soluble oil that requires
minimal maintenance and is suitable
for machining aluminum, steel and
nickel alloys, as well as cast iron and
yellow metals.
The trial of TRIM E715 resolved the bacterial
contamination issue completely, eliminating the need
for costly cleanouts, a saving of nearly $9,325 per year.
Resolving bacterial contamination also removed the bad
odors that operators frequently complained about. All
machines have since been switched over to TRIM E715.
TRIM E715 also fixed the issue with oversized holes that
resulted in scrapped parts. The aerospace components
supplier has had no reports of issues since the conversion.
And, as a bonus, several operators who suffered from
dermatitis with the former metalworking fluid have had
their skin clear up since the switch to TRIM E715.
©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-04-16
“During the six-week test run, we resolved the
bacterial contamination issue, leading to no
need for costly cleanouts since April 2019.”
-Machine Shop Manager

50% Coolant Reduction

30% Annual Savings

Signicast Improves Employee Morale with Master Fluid Solutions Signicast Improves Employee Morale
with Master Fluid Solutions
Signicast manufactures precision investment castings for a variety of industries, including firearms,
mining and oilfield, recreational vehicles, and aerospace. With three plants located in the United States
and three in Europe, Signicast can meet the needs of small to large runs of components for a wide range
of applications.
THE CHALLENGE THE SOLUTION
THE RESULTS
Biostability and customer service are the two main
factors that drive Signicast’s metalworking fluid purchases.
The fluid needs to avoid changing colors or developing
a bad smell, which can indicate the presence of harmful
bacteria or tramp oil and make for an unpleasant work
environment for employees. Signicast also wants to know
that its metalworking fluid provider will provide assistance
if needed.
Nonexistent customer service from a previous supplier
led Signicast to find a new provider. Its Milwaukee,
Wisconsin-area facility uses a 10,000 gallon system, and
the company needed to know that it would get technical
support when it had questions about managing its fluid.
After evaluating several metalworking fluid suppliers,
Signicast chose Master Fluid Solutions and its
TRIM® MicroSol® 585XT for its operations. TRIM
MicroSol 585XT does not require extra biocides or
fungicides to remain biostable. The District Sales Manager
from Master Fluid Solutions helped steer Signicast to the
correct fluid for its machines, was knowledgeable about
the product line and metalworking, and was confident that
the product would work.
TRIM® MicroSol® 585XT became part of Signicast’s overall
efforts to achieve longer tool life, and it certainly has
contributed to the initiative. The machines are cleaner and
do not have a brown sludge buildup, saving approximately
$16,000 per year in its main coolant system.
However, it’s Master Fluid Solutions’s customer service
that has really stood out to the company. When Signicast
has a question about how to improve its shop floor,
Master Fluid Solutions is there to provide information.
Master Fluid Solutions also sent in its own service
engineers to assist with discharge, clean, and recharge
(DCR) to ensure a proper, thorough and quick process.
Additionally, the biostability of TRIM MicroSol 585XT
has contributed to happier employees, who no longer
continually have to report problems with the fluid. This
takes the pressure off the Plant Engineer, who can focus
on proactively managing and maintaining equipment on
the shop floor and continue to reap the benefits of the
cost savings, turning that toward strategic initiatives.
“Master Fluid Solutions isn’t afraid to jump in and get
dirty. With them, it’s all about customer service.”
– Matthew Speier, Plant Engineer
©2019 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-01-22

$16,000 Per Year Savings!

Aerospace Manufacturer’s Holes Per Drill Soar with Master Fluid Solutions Aerospace Manufacturer’s Holes Per
Drill Soar with Master Fluid Solutions
At 30,000 feet, there’s no room for error. Aerospace companies have to meet that high standard
when they design, manufacture, and support products that keep airline passengers safe in flight.
One aerospace components manufacturer based in the Northeast focuses on aerospace propulsion
components, flight control components, and aero engine components — all of which require high quality
and precision to meet safety standards and specifications. The company machines a variety of alloys,
including low carbon, hardened steel, aluminum, titanium, and nickel, as well as stainless steel, using
drilling, reaming, tapping, milling, turning, and grinding operations.
THE CHALLENGE THE SOLUTION
THE RESULTS
The aerospace components manufacturer could only
get six holes per drill on a small drill with its incumbent
coolant. This was not enough and led the company to
start searching for a new coolant that could yield more
holes per drill, as well as increase the life of its tools and
reject tramp oil.
Coolants used in the aerospace industry must meet the
demands of high-pressure, high-volume applications.
The aerospace components manufacturer began testing
TRIM® E925AE for these rigorous applications, as it
uses a proprietary lubricity package for a better surface
finish and longer tool life when machining aerospace
materials. TRIM® E925AE protects sensitive aluminum and
nonferrous alloys, and its soft fluid film protects chucks,
ways, and tool holders.
The test run of TRIM® E925AE was a resounding success
for the components manufacturer. TRIM® E925AE yielded
96 holes per drill, a 1500% increase. Additionally, part
finishes were excellent, and drilling and reaming sizes,
along with turning, milling, drilling, and reaming results
overall were very good. Tool life was extended, and TRIM®
E925AE rejected tramp oil well. The fluid ran clean in the
machine, leaving no residue.
For this aerospace company, using TRIM® E925AE has
allowed them to improve production and extend tool life.
THE NUMBERS
• 1500% increase in holes per drill
• 96 holes per drill with TRIM® E925AE vs. 6
holes per drill with the previous coolant
• Total tooling spend decreased by 90%
©2020 Master Fluid Solutions. Master Fluid Solutions®, TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2020-01-22

Holes Per Drill Up 1500%

Flawless Parts

Astonishing Results

Revved-up Performance: Global Automotive Crankshaft Manufacturer Saves Coolant Costs www.masterfluidsolutions.com/na/en-us/
Rev-up your
performance.
Have our team of Camshaft/
Crankshaft Grinding Experts
baseline your operation.
Call 800-874-0105 today
to improve your productivity
PROVEN COST SAVINGS
Downtime due to foaming
and bacteria was eliminated
and production is up.
Application Specifications
Grinder: Landis Multi-Wheel
Wheel: Norton SG
Material: powdered metal
Operation: journal grind
Filter: vacuum paper bed
INNOVATIONS
F O R L O N G E R S U M P
A N D T O O L L I F E
©2019 Master Fluid Solutions. Master Fluid Solutions® and TRIM® are registered
trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-12-05
ReOvvveedr -tUhep LPoenrfgo rHmaaunl ce
Additional significant savings were realized by eliminating the need for costly additives
to reduce bacteria and foam levels. C270 reduced oil mist, kept the work environment
cleaner, improved part cleanliness for process gauging, and increased operator
acceptance. Now crankshaft and camshaft production is running smooth with C270.
When a world leader in automotive manufacturing
had a problem, TRIM® experts provided the solution.
Problem: A global automotive manufacturer’s crankshaft production at one facility fell
short of its 1500 crankshafts per day objective. Analysis proved further production time
was being lost due to foaming and heavy bacterial contamination of a heavy-duty
ester-based coolant.
Solution: TRIM® C270 proved the perfect solution. Independent testing confirms
C270 dissipates foam 13.9 times faster than the competition, and operates at a
very low bacteria level. The automotive manufacturer changed to C270 with
dramatic savings in coolant costs, water, filter media use, and downtime.
Coolant costs dropped by
$36,000 per year.
Water consumption
decreased 40%.
Filter media use down
over 30%.
BBEEFFOORREE
WITH TRIM C270
BBEEFFOORREE
WITH TRIM C270
$ $
$ $
BBEEFFOORREE
WITH TRIM C270
DOWNTIME COOLANT COST WATER USE FILTER MEDIA
72,000
36,000

Costs Dropped By $36,000

Zooming Production: Global Camshaft Producer Reduces Filter Media by over 98%

Filter Media Reduced 98%

$Excel Manufacturing Boosted their bottom line with TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT www.masterfluidsolutions.com/na/en-us/ ©2015-2019 Master Fluid Solutions. TRIM® and MicroSol® are registered trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-12-03 Here’s how TRIM® MicroSol® 690XT semisynthetic outperformed expectations for Excel Manufacturing MicroSol 690XT saves time and money Brad Watts, Makino a81 operator, is thrilled with their change to premium semisynthetic MicroSol 690XT. They had been using two different coolants in their shop, one of which was targeted specifically at their foaming issues. Now they were looking for one high-performance solution that could do it all. After a threemonth trial, Excel Manufacturing changed over their whole shop to MicroSol 690XT. They find MicroSol 690XT has provided much better lubricity with low foam and much less coolant consumption. They had been running their coolant with a high refractometer reading in an effort to address their problem with excessive foam. Now they run MicroSol 690XT at half the refractometer reading with no foaming issues at all. Brad Watts attests, “Even with the previous, reliable low-foam coolant, foam would build up in the reserve wait area so high that it coated the drum and caused the machine to go into a low-coolant false alarm. With the MicroSol 690XT, foam barely builds up, then breaks down quickly without a problem. MicroSol 690XT is going to save us a lot of money... and I’m really excited we got it shop-wide.” Longer tool life and less foam with MicroSol 690XT Maintenance supervisor Curt Metcalf tells us about their successful three-month testing of MicroSol 690XT. “We tested it on aluminum, cast iron, and ductal iron. It solved a reaming problem we were having on aluminum, and we saw improved tool life. Operators like the low chemical smell and the parts are much cleaner.” To resolve their foaming issues Curt says they had tried other quality coolants, even those specially designed to be low-foam. One premium microemulsion did solve the foam problems, but resulted in shorter tool life. With excellent low-foam properties and exceptional tool life, Curt says, “MicroSol 690XT does it all!” Boost your profits and production with MicroSol 690XT! View testimonial for Bradford Watts, “MicroSol® 690XT Runs at About Half the Concentration...” at https://2trim.us/v/?v=419 Check out video testimonial “Curt Metcalf Solves Reaming Problem with MicroSol® 690XT” at https://2trim.us/v/?v=415 For more video interviews from our customers about MicroSol 690XT performance, visit our web site at: www.microsol-690xt.com TRIM® MicroSol® 690XT Boosted their Bottom Line EXCEL MANUFACTURING OF SEYMOUR, INDIANA INNOVATIONS FOR LONGER SUMP A N D T O O L L I F E Maintenance Supervisor Curt Metcalf Makino a81 Operator Brad Watts$

Boosted the Bottom Line

Arkansas Automotive Products Facility Cuts Costs by 30% with Master Fluid Solutions Arkansas Automotive Products Facility Cuts
Costs by 30% with Master Fluid Solutions
A Heber Springs, Arkansas facility, as part of a global company, focuses on suspension products for the
automotive industry using COBAPRESS™, gravity die casting, low-pressure casting, machining, and assembly.
The facility works with aluminum alloy.
THE CHALLENGE THE SOLUTION
THE RESULTS
Machine operators handle parts all day that are
saturated in metalworking fluid, and environmental health
and safety for these employees is a big concern for the
facility. Dermatitis not only affects employee morale but
also productivity.
Additionally, at a plant like this one, a lot of fluids are
used on a day-to-day basis. A significant driver for
choosing fluid is how to lower the cost per piece,
which in this case is how much metalworking fluid is
used to manufacture one part, measured in gallons of
concentrate.
The facility chose a TRIM® MicroSol® product that has
moderate to heavy lubricity, as well as low carry off on
the parts. It meets the health and safety standards set
by the company, as well as a cleanliness specification to
protect the state-of-the-art machines in the plant.
In addition to providing guidance for choosing fluid,
Master Fluid Solutions also came on-site to implement
service aspects to better control fluid management.
This included weekly fluid sampling and concentration
checks, as well as training for facility employees. This
ongoing on-site maintenance and education helps them
improve the life of their fluid.
The cost savings alone have proven that the TRIM®
MicroSol® fluid is ideal for the facility. The company was
able to slash its cost per piece by 30%, a savings of
approximately $180,000 per year or $540,000 over the
three-year contract signed with Master Fluid Solutions.
The facility is also seeing a cleaner working environment.
And as a result of the improved metalworking fluid
management techniques implemented alongside Master
Fluid Solutions, the company has also reduced the
need for service labor and floor maintenance due to
equipment failures.
Anticipated three-year savings: $540,000 with TRIM® MicroSol®
2019-12-02

Cost Per Piece Slashed by 30%

Over the Long Haul: Commercial Truck and Van Engine Manufacturer Eliminated Rust Problem: This manufacturer’s engines are found in virtually every type of commercial
truck and van on the road today, yet they were using an inexpensive local coolant and
were plague with rusting parts and excessive foam. With poor sump life, their 6,500-
gallon central system needed to be dumped every three months.
Besides reducing overall coolant costs and related downtime, improvements include: no
more rusty parts to rework, reduced oil mist, cleaner parts and work area, and better
operator acceptance.
Solution: They needed a coolant that offered low foaming, long sump life, and rust
protection – TRIM® C270 was the solution. They made the switch and the system has
been up and running over eight months without needing to be dumped. Though the local
coolant was one-tenth the cost of C270, the switch to C270 has paid for itself already.
www.masterfluidsolutions.com/na/en-us/
Is your
coolant good
for the long haul?
Have our team of Camshaft/Crankshaft
Grinding Experts baseline your
operation. Call 800-874-0105 today
to improve your productivity
PROVEN COST SAVINGS & PROCESS IMPROVEMENTS
Annualized coolant costs dramatically
reduced – payback in eight months.
Downtime for cleanouts down by 400
percent – from quarterly to ZERO.
Application Specifications
Grinder: Landis
Wheels: Norton vitrified CBN
Material: cast iron and steel
Operation: journal grind
Filter: vacuum paper bed
C270 did away with rusted parts
and costly parts reworks.
INNOVATIONS
F O R L O N G E R S U M P
A N D T O O L L I F E
©2019 Master Fluid Solutions. Master Fluid Solutions® and TRIM® are registered
trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-11-29
OvOerv ethre t hLeo nLgo nHga Hulaul
BBEEFFOORREE
12 months
8 months
WITH TRIM C270
None
CLEANOUTS PER YEAR
Every 3 months
ANNUALIIZED COOLANT COSTS IIN MONTHS
WITH TRIM C270
BBEEFFOORREE
When a worldwide manufacturer of engines
had a problem, TRIM® experts had the solution.
RUST LIKE THIS? NEVER AGAIN!
COSTS: DOWN CLEANOUTS: DOWN RUST: GONE

Downtime for Cleanouts Down by 400%

Going the distance: Chinese Diesel Engine Manufacturer Improved Sump Life www.masterfluidsolutions.com/na/en-us/
©2019 Master Fluid Solutions. Master Fluid Solutions® and TRIM® are registered
trademarks of Master Chemical Corporation d/b/a Master Fluid Solutions. 2019-11-26
INNOVATIONS
F O R L O N G E R S U M P
A N D T O O L L I F E
Application Specifications
Grinder: Landis, Schleifring
Wheels: vitrified CBN
Material: steel
Operation: journal, lobe grind
Filter: paper media
Does your coolant
go the distance?
Have our team of Camshaft/Crankshaft
Grinding Experts baseline your operation.
Call 800-874-0105 today to improve
your productivity
PROVEN COST SAVINGS
Eliminated need for costly additives
to control foam and bacteria
No foaming problems meant
no sump pumpout downtime
FOAM DOWNTIME
Solution: Starting in 2003, TRIM® C270 was used in a group of existing Landis
grinders. Impressive results led to C270 replacing other coolants throughout the
plant. When new Schleifring grinders were installed, C270 was their fluid of choice.
Problem: This Chinese diesel engine manufacturer needed to improve their overall
camshaft/crankshaft grinding process and reduce costs. They’d used both an
expensive, high-tech, semisynthetic coolant and a less expensive local blend; both
had problems with foam and short sump life.
Having eliminated foaming, the need for additives, and having improved sump life,
the manufacturer now uses C270 exclusively in their entire grinding process — over
100 machines of various sizes.
Going the Distance
When a global engine and parts manufacturer
had a problem, TRIM® experts had the solution.

Improved Grinding & Reduced Costs

REALLY Clean!

Ace Manufacturing of Cincinnati, Ohio | TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT Raised the Bar on Productivity www.masterfluidsolutions.com/na/en-us/ ©2015-2019 Master Fluid Solutions. TRIM® and MicroSol® are registered trademarks of Master Chemical
Corporation d/b/a Master Fluid Solutions. 2019-09-24
TRIM® MicroSol® 690XT produced
dramatic results for Ace Manufacturing
Ace Manufacturing of Cincinnati, Ohio had been running
another coolant with far less than desired results. They were
experiencing multiple problems: ”tap break and a real terrible
tool life”, along with problems with foam, shop uncleanliness,
rust on machines, and foul odor. Within weeks of beginning
their trial of MicroSol 690XT on three CNC machines, they
reported tool life was dramatically improved. Highly lubricious
MicroSol 690XT was keeping the machines lightly oiled,
rust-free, and definitely cleaner without any residue build up.
Tapping into fluid savings - and bonuses -
with MicroSol 690XT
Ace supervisor Chuck Adams says, ”We’re losing a lot of coolant
because it was foaming out of the side of the tanks, especially
the two Morey’s with the high-pressure units. We were losing
15 to 20 gallons a week just from overflow. Since we have
changed to MicroSol 690XT, we have no foam at all! Our
operators like the pleasant odor and the shop environment is
cleaner. We’re changing the entire shop over to MicroSol 690XT.”
”We were having a lot of tap wear and tap breaks trying to
tap titanium,” Chuck testifies. ”After putting in MicroSol 690XT,
tapping is much better, lubricity much higher, we’re having less
failure, and our taps are lasting a lot longer. We are not shutting
down to change tools as often, so we exceeded our production
target and got our bonus this past quarter!”
MicroSol 690XT, the problem solver
Ace Manufacturing’s CNC operator Phil Smith couldn’t be
more impressed with MicroSol 690XT’s performance. Phil
reports “Since we have switched to using MicroSol 690XT, it
has eliminated all my rust issues, all of my tapping and tooling
breakage problems, all the odor issues, and all of the foaming
issues! It has been a great coolant!”
Let MicroSol 690XT put you at the top of the pack!
Check out our MicroSol 690XT customer video testimonials at:
https://2trim.us/v/?v=416
Chuck Adams, Machining Titanium with MicroSol® 690XT
https://2trim.us/v/?v=417
Chuck Adams, Tapping into Fluid Savings with MicroSol® 690XT
https://2trim.us/v/?v=418
Chuck Adams, Wants to Convert Whole Shop to MicroSol® 690XT
https://2trim.us/v/?v=414
Phil Smith, Eliminates Tool Breaking Issues with MicroSol® 690XT
TRIM® MicroSol® 690XT
Raised the Bar
on Productivity
ACE MANUFACTURING OF CINCINNATI, OHIO
INNOVATIONS
FOR LONGER SUMP
A N D T O O L L I F E
CNC Operator Phil Smith
Supervisor Chuck Adams

Tool Breakage Problems Eliminated

TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT Raised the Bar on Cleanliness www.masterfluidsolutions.com/na/en-us/ ©2015-2019 Master Fluid Solutions. TRIM® and MicroSol® are registered trademarks of Master Chemical
Corporation d/b/a Master Fluid Solutions. 2019-09-24
Ace Manufacturing enjoys keeping it clean
with the switch to TRIM® MicroSol® 690XT.
When Ace Manufacturing of Cincinnati, OH switched to
MicroSol 690XT shopwide, here is what Shop Supervisor Chuck
Adams reported...“after just the first couple weeks, the inside
of the machines, way covers, and jigs are rust free and the
machines are definitely a lot cleaner. It keeps the inside of the
machines lightly oiled with a light film, but there is no discoloration
or residue buildup.”
Chuck continues, “With the MicroSol 690XT, we have virtually
no residue in our machines. The operators like the coolant a
lot better because it keeps their machines clean and they don’t
have to work hard cleaning the parts after machining. Not only
are the parts themselves cleaner, but the smell’s better and the
workplace is cleaner.”
Choose MicroSol 690XT:
> highest lubricity MicroSol product for
markedly longer tool life and superior finish
> exceptional foam control, low carryoff
> dramatically extended sump life for
substantial savings on time and material
> soft aqueous film protects parts, keeps machines clean
> multimetal, multi-operation versatility
> superior corrosion inhibition on
ferrous and nonferrous metals
> nonchlorinated; no nitrates, triazine, phenol, or
sulphurized EP additives
> no need for tank-side biocides or fungicides
> boron- and halogen-free
Use MicroSol 690XT especially for:
> steel, stainless steel, copper, titanium and
aluminum alloys, and most composites
> high-pressure, low-foaming operations
Keep it really clean with MicroSol 690XT!
INNOVATIONS
FOR LONGER SUMP
A N D T O O L L I F E
TRIM® MicroSol® 690XT
Raised the Bar
on Cleanliness
ACE MANUFACTURING OF CINCINNATI, OHIO
Typical semisynthetic
leaves sticky residue.
TRIM MicroSol 690 XT
keeps machines clean!
Check out our MicroSol 690XT customer video testimonials at:
https://2trim.us/v/?v=416
Chuck Adams, Machining Titanium with MicroSol® 690XT
https://2trim.us/v/?v=417
Chuck Adams, Tapping into Fluid Savings with MicroSol® 690XT
https://2trim.us/v/?v=418
Chuck Adams, Wants to Convert Whole Shop to MicroSol® 690XT
https://2trim.us/v/?v=414
Phil Smith, Eliminates Tool Breaking Issues with MicroSol® 690XT

Very Clean Machines