Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

Semisynthetics Cutting & Grinding Fluids

Cutting edge solutions:

TRIM® semisynthetics offer the cooling and lubricity of a synthetic without the higher oil content of an emulsion. Designed to operate at higher SFPM, semisynthetics perform well on many operations including face milling, cut-off turning, grinding, tapping, and drilling — depending on the specific product.

Semisynthetics are compatible with alloy steels, tool steels, cast irons, copper alloys, as well as plastics and composites. With less carryoff, semisynthetics use less material — it all adds up to lower costs.

Number of products in category is 12

TRIM® MicroSol™ 456

Low-foam Ferrous Semisynthetic

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminium alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

TRIM® MicroSol™ 515

Cutting and Grinding Fluid Concentrate

TRIM MicroSol 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys.

  • Medium to high levels of lubrication without chlorinated or sulphurised EP additives
  • Compatible with aluminium, all steels, yellow metals and cast iron
  • Extremely hard water tolerant
  • Alternative to emulsion products for machining of high silica aluminium alloys
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • No aggressive biocides
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers, or phenolic compounds

TRIM® MicroSol™ 519

Premium Microemulsion

TRIM MicroSol 519 is a medium to high lubricity, semisynthetic, microemulsion coolant. The formula provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. Whilst it is particularly suited to machining and grinding cast iron and steel, it does very well in mixed metal situations and is a proven performer on aluminium alloys, stainless steels and titanium.

  • Formaldehyde releaser and boron free
  • Low foaming for modern high-pressure, high-volume applications
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 530

High-lubricity Semisynthetic

TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.

  • Lubrication package gives excellent performance for aluminium machining
  • Excellent choice for aluminium alloy wheel machining applications
  • Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel® machining applications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to milky soluble oils on aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and coolant carry-off

TRIM® MicroSol™ 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM<sup>®</sup> MicroSol™ 585XT

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols and chlorinated or sulfurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 590XT

Advanced Technology Aerospace Semisynthetic

TRIM<sup>®</sup> MicroSol™ 590XT

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to milky soluble oils on high-silica aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol™ 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM<sup>®</sup> MicroSol™ 690XT

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Boron and formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols, chlorinated or sulphurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® SC415

Low Foaming Semisynthetic Fluid

TRIM SC415 is a lower foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products especially in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • A very versatile product that works well in a wide range of operations such as grinding, milling, turning, drilling, and tapping
  • Extremely good product for cast iron and steel machining and grinding
  • Extremely fine emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Extremely hard water tolerant
  • Easily recycled or disposed of without special handling or equipment

TRIM® SC440

Low oil Semisynthetic

TRIM SC440 is a low foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products especially in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • Formaldehyde releaser and boron free
  • Provides superior corrosion inhibition on all ferrous metals
  • Fast wetting to get the fluid to the point of cut and keep grinding wheels clean
  • Low foaming for modern high-pressure, high-volume applications
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Uses standard metalworking recycling and disposal techniques

TRIM® SC440SW

Low foam Semisynthetic

TRIM SC440SW is a very low foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel in soft water. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products. SC440SW's clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

  • No aggressive biocides
  • Low foaming even in soft water
  • Excellent rust protection to prevent clinkering of cast iron chips
  • Keeps the machine and work environment clean even when machining or grinding grey iron
  • Fine micro-emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and keep grinding wheels clean
  • Easily recycled or disposed of without special handling or equipment

TRIM® SC536

Low-oil Semisynthetic

TRIM<sup>®</sup> SC536

TRIM SC536 is a low oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odour level which usually disappears after on-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC617

High Performance Semisynthetic Fluid

TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.

  • A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
  • Extremely good product for cast iron, steel and stainless steel machining and grinding
  • Low foam profile enables use in through tool machining applications
  • Very fine emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Extremely hard water tolerant
  • Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life