Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

MicroSol™ Products

For ultimate performance:

TRIM® MicroSol™ semisynthetic microemulsion coolants deliver high-performance lubricity and ultimately lower costs. Achieve precision parts, exceptional tool life, extended sump life, assured regulatory compliance, and greater profitability with the MicroSol product just right for your production.

Designed to meet the rigorous demands of the aerospace, medical, automotive, and high production, precision parts manufacturing industries, there's a MicroSol to answer your concerns, ramp up your production, and boost your bottom line.

Number of products in category is 7

TRIM® MicroSol™ 456

Low-foam Ferrous Semisynthetic

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminium alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

TRIM® MicroSol™ 515

Cutting and Grinding Fluid Concentrate

TRIM MicroSol 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys.

  • Medium to high levels of lubrication without chlorinated or sulphurised EP additives
  • Compatible with aluminium, all steels, yellow metals and cast iron
  • Extremely hard water tolerant
  • Alternative to emulsion products for machining of high silica aluminium alloys
  • Fine soluble oil emulsion reduces carry-off for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • No aggressive biocides
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers, or phenolic compounds

TRIM® MicroSol™ 519

Premium Microemulsion

TRIM MicroSol 519 is a medium to high lubricity, semisynthetic, microemulsion coolant. The formula provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. Whilst it is particularly suited to machining and grinding cast iron and steel, it does very well in mixed metal situations and is a proven performer on aluminium alloys, stainless steels and titanium.

  • Formaldehyde releaser and boron free
  • Low foaming for modern high-pressure, high-volume applications
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 530

High-lubricity Semisynthetic

TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.

  • Lubrication package gives excellent performance for aluminium machining
  • Excellent choice for aluminium alloy wheel machining applications
  • Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel® machining applications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to milky soluble oils on aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and coolant carry-off

TRIM® MicroSol™ 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM<sup>®</sup> MicroSol™ 585XT

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
  • Optimised combination of cooling and lubricity for titanium machining applications
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols and chlorinated or sulfurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol™ 590XT

Advanced Technology Aerospace Semisynthetic

TRIM<sup>®</sup> MicroSol™ 590XT

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to milky soluble oils on high-silica aluminium alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol™ 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM<sup>®</sup> MicroSol™ 690XT

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.

  • Dramatically extends useful life without the need for tank side biocides or fungicides
  • Boron and formaldehyde free
  • Low foaming for demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
  • Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
  • Contains no nitrites, phenols, chlorinated or sulphurised EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques