ログイン
Home

TRIM® MicroSol® 690XT

高潤滑性、低発泡性プレミアアムセミシンセティック製品

TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT - 5 gallon Pail

TRIM® MicroSol® 690XT

TRIM® MicroSol® 690XTは高潤滑性、セミシンセティック マイクロエマルジョンクーラントです。この製品は、前世代のセミシンセティック製品と比較して、サンプ寿命を延ばし、消泡性を改善する化学成分となっています。プレミアムTRIM® クーラントに期待する機械にやさしい特性と共に、優れた冷却および機械潤滑性を提供します。混合金属にも非常によく適合し、チタン、高ニッケル合金、鋼、銅、アルミニウム合金など、非常に幅広い材料と適合します。

  • タンク横の消毒液や殺菌剤は必要なく、飛躍的に耐用期間を延ばします
  • ホウ素およびハロゲンを使用していません
  • 現代の要求の厳しい高圧高容量用途に適した低発泡性
  • チタン、高ニッケル合金、鋼、銅、アルミニウム合金を含む非常に幅広い材料に適合
  • 高シリカアルミニウム合金の塩素化可溶オイルの優れた代替品
  • 亜硝酸塩、トリアジン、フェノール、塩素化または硫化極圧添加剤を含みません
  • すべての鉄鋼及び非鉄金属で最高の腐食防止効果をもたらします
  • 機械を清浄な状態に保ち、軟らかい液体フィルムで守るため、清掃が簡単になりメンテナンスも減ります
  • 標準的な金属加工リサイクルおよび処分法に適合します

TRIM® MicroSol® 690XT   
©2014-2020 Master Fluid Solutions®

Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT

Watch the video to find out what everyone at Hy-Speed Machining has to say about MicroSol 690XT! Michael Mills, General Manager, Cutting Inconel: "Tools lasted a lot longer, parts came out better." Mike Mills Jr., CNC Programmer, Cutting Inconel: "I went from twelve minutes a part to about four and a half minutes." Taylor Cooper, CNC Operator, "The coolant is tenfold to what we've been using" Weston InKrote, CNC Operator, "Tooling life went up, run time cut in half, finishes were great" Peter Duffy, Maintenance, "More profit for us"

2015-04-14, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=420.0

ビデオのダウンロード >



Chuck Adams is Machining A Lot of Titanium with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "Our shop is starting to machine a lot of titanium products. In order to prevent micro fractures in the metal, we wanted a coolant that was nonchlorinated. With the MicroSol 690XT we achieved that purpose and also cut down on tap breaks. We were having a lot of tap wear and tap breaks trying to tap titanium. After putting in the 690XT the tapping is much better, lubricity is much higher, we’re having less failure, and our taps are lasting a lot longer!"

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=416.0

ビデオのダウンロード >



Bradford Watts, "MicroSol® 690XT Runs at About Half the Concentration..."

Bradford Watts of Excel Manufacturing in Seymour, Indiana says, "MicroSol 690XT runs at about half the concentration level as our older style coolant. We have used less of the 690XT in the machines and that has saved us a lot of money. MicroSol 690XT keeps the tools as clean as the old product. MicroSol 690XT is probably the best coolant that we have had in my time here; and I have been here almost ten years."

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=419.0

ビデオのダウンロード >



Chuck Adams Wants to Convert Whole Shop to MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "After trials with the MicroSol 690XT in three of the machines, we wanted to buy the product. Three to four weeks after cleaning the machines we were having better machining. The product was not available at the time of the trial, so we changed the rest of the shop over to 685XT, which we are currently running. As soon as 690XT goes into production, we are changing the entire shop over to 690XT."

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=418.0

ビデオのダウンロード >



Curt Metcalf Solves Reaming Problem with MicroSol® 690XT

My name is Curt Metcalf and I work at Excel Manufacturing in Seymour, Indiana. We have been testing MicroSol 690XT for about three months now on two different machines with good success. We have tested aluminum, cast iron, and ductal iron. It solved a reaming problem we had on an aluminum machining operation and and gave us good tool life. The operators like it because of the low chemical smell and the parts come clean.

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=415.0

ビデオのダウンロード >



Chuck Adams Tapping into Fluid Savings with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio noted, "Prior to using MicroSol 690XT we were using $150 to $200 every two weeks on tapping fluid aerosol cans on all the machines. Now that we are using the TRIM coolant we don’t use any other tapping product. It is now just straight coolant with no problems."

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=417.0

ビデオのダウンロード >



Phil Smith Eliminates Tool Breaking Issues with MicroSol® 690XT

Phil Smith, Ace Manufacturing Company, Cincinnati, Ohio, states, "Since we have switched to using MicroSol 690XT coolant, it has eliminated all my rust issues, all of my tapping and tooling breakage issues, all the odor issues, and all of the foaming issues. MicroSol 690XT has been a great coolant."

2014-12-05, アメリカ英語

ビデオをシェアするには、このURLをコピーしてください: https://2trim.us/v/?v=414.0

ビデオのダウンロード >