Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support
TRIM C115
Description Application Guidelines Properties Concentrations Mixing Ordering Information Additional Information
Health and Safety Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Tech Tips
Documents
Videos
Logo - TRIM™ wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM™ wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM™ C115

Synthetic

TRIM<sup>®</sup> C115 - 5 gallon pail

Application Guidelines

  • C115 is not recommended in machine tools that rely on coolant splash to lubricate the mechanical portions of the machine tool; e.g., older screw machines, etc.
  • Foam may increase if the temperature is below 80°F (27°C) at the point of agitation.
  • C115 is not recommended on materials (i.e., magnesium or zirconium) without special precautions.
  • This product is a superior cleaning agent so it may "wash out" dirt and residues when a machine is first charged; a thorough cleaning of older machines is required when installing this product for the first time.
  • The minimum recommended concentration is 5% on cast iron, 4% on steel, and 5% in glass grinding.
  • Concentrations above 7.5% provide the best corrosion inhibition, tool life, and sump life; however, on-site testing is usually the best way to set your concentration.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/ap/en-ap/distributors/index.php, your District Sales Manager, or email us at [email protected].

TRIM™ C115   
©1999-2024 Master Fluid Solutions™