Home

Home

Cleaners+RP Corrosion Inhibitors

Master STAGES™ CLEAN family of advanced-technology products offer highly-effective cleaning and with the same in-process 'one-step' leave behind an effective, short-term, anticorrosive film.

Designed for specific metals, desired length of corrosion inhibition, and applications ranging from spray, immersion, ultrasonic parts, and dip tank cleaning, Master STAGES cleaners+RP inhibitors are all highly-concentrated and economical, most with low foam and very low V.O.C. content.

Number of products in category is 5

Master STAGES™ CLEAN 2029 "One Step"

Parts Washing Fluid with Corrosion Inhibitor

Master STAGES™ CLEAN 2029 "One Step"

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Master STAGES™ CLEAN 2030

Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers

Master STAGES™ CLEAN 2030

Master STAGES™ CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030's oil-rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer.
  • Will provide one-to two-weeks' indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
  • Contains no borates, phosphates, phenols, or nitrites, and no SARA 313-listed ingredients
  • Will remove coolant residues as well as straight oils
  • Also very compatible with magnesium and zinc

Master STAGES™ CLEAN 2115

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115

Master STAGES™ CLEAN 2115 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces

  • Compatible with a wide range of materials including cast iron, steels, zinc, plastics, and composites
  • When washing aluminum parts above 100°F (40°C) consider using Master STAGES™ CLEAN 2115AL
  • Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115 applications are in the range of 3,000 PSI-10,000 PSI (200-600 kPa)
  • Provides excellent short-term corrosion inhibition on most common ferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Can be used on most aluminum alloys if kept under 100°F (40°C)
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2115AL

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (200 to 660 kPa)
  • Provides short term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2430

Near-neutral Washing Compound

Master STAGES™ CLEAN 2430

Master STAGES™ CLEAN 2430 is a highly-concentrated, mild pH, liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in high-pressure spray washers
  • CLEAN 2430 "splits" oils to the surface of the cleaner tank for easy skimming
  • Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
  • Provides long life between washer cleanouts