Login
Home

cutting.svg
M
cutting
Number of products: 22
Application: cutting
Metal: stainless steels [M]

TRIM® C270

High-performance Synthetic

TRIM<sup>®</sup> C270

TRIM® C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days


TRIM® C350

Premium Synthetic Metalworking Fluid

TRIM<sup>®</sup> C350

TRIM® C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost


TRIM® C380

Premium Ferrous Machining Synthetic

TRIM<sup>®</sup> C380

TRIM® C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

  • Ease of maintenance, low carryoff, and long sump life result in low operating cost
  • Clear, low foaming, low odor, and low mist create a clean manufacturing environment
  • High performance in a wide range of operations from general grinding to heavy-duty machining
  • Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
  • Easily removed from parts before assembly, painting, or plating operations
  • Product readily rejects process oils such as hydraulic and way oils
  • Excellent surface finish in finish-grinding operations
  • PRTR compliant


WEDOLiT CN 2610-18

Straight cutting oil

Documents
Read More...

WEDOLiT CN 2610-18 3 is a non-water soluble high performance cutting and grinding oil of low viscosity. Highly alloyed steel grades and cast iron, non-ferrous metals and aluminium.

WEDOLIT CN 2610-18 has been developed, to treat all materials and grades of difficulty, with only one grinding oil.

WEDOLIT CN 2610-18 has a type approval at company KAPP.

Corrosion protection for a longer time depends of the treated material. In tests the corrosion protection, especially for non-ferrous metals, should be investigated. So far the immediate degreasing of the metal surface is recommended. The non-ageing oily film can easily be removed with the aid of organic solvents (e.g. petroleum) or water soluble alkaline industrial cleaning agents.

  • High inhibitor content
  • High performance through special combination of EP / AW additives
  • Excellent lubricity to achieve high surface qualities and elongated tool life while reducing the heat generation


WEDOLiT CN 3370-21

Straight Cutting Oil

Documents
Read More...

WEDOLiT CN 3370-21 is a chlorine-free, highly additivated cutting-oil, based on the new GTL-technology.

WEDOLiT CN 3370-21 has been developed for deep-hole drilling applications in steel and high alloy steels. Due to its additivation, WEDOLiT CN 3370-21 provides the best tool life and fantastic surface finish. WEDOLiT CN 3370-21 can also be used for general cutting operations such as milling, turning, drilling and hobbing.

  • Additivation especially designed for deep-hole drilling
  • High surface finish of the treated work-pieces
  • Long tool life
  • Good rinsing effect and optimal chip transport
  • High dimensional accuracy at very tight tolerances


WEDOLiT CN 5370-12

Cutting Oil

Documents
Read More...

WEDOLiT CN 5370-12 is a low viscous non-water soluble high performance cutting oil based on the latest GTL base oil technology. GTL base oils are free of aromatics, chlorine, zinc, nitrogen and heavy metals. CN 5370-12 is suitable for the machining of steel, stainless steel, cast iron, aluminium and non-ferrous metals. The product can be used in MQL (minimum quantity lubrication) systems (e.g. for sawing).

  • High cutting performance, which leads to an excellent surface finish and dimensional accuracy
  • Contributes to a high tool life
  • High flashpoint despite low viscosity
  • Very good air separation
  • Low consumption due to low evaporation loss


WEDOLiT CS 6201

Water-miscible, fully synthetic coolant

Documents
Read More...

WEDOLiT CS 6201 is suitable for grinding as well as for light to medium cutting operations of steel, aluminium, non-ferrous metals and special for hard metal alloys.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately °dH)
  • Almost free of foam
  • Offers a good skin compatibility


TRIM® E206

Long-life Emulsion

TRIM<sup>®</sup> E206

TRIM® E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment


TRIM® E850

Premium Emulsion

TRIM<sup>®</sup> E850

TRIM® E850 is a proprietary blend of new "green" vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carryoff rates result in low operating cost
  • Low product odor
  • Mild operator contact properties
  • Provides superior results in a wide range of operations
  • Excellent corrosion resistance on both nonferrous and ferrous materials
  • Superior wetting and penetration to the point of cut
  • Soft fluid film protects ways, chucks, and tool holders
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • High performance without the use of chlorinated paraffins


TRIM® E906

Premium, Low-foaming Emulsion

TRIM<sup>®</sup> E906

TRIM® E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

  • Longer operational life than competitive fluids
  • Highly effective, extreme pressure additives control built-up edge
  • E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
  • Low odor for pleasant operating environment
  • Tight emulsion reduces carryoff and gets the fluid to the point of cut
  • In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® E923

Chlorine-free, Extreme-lubricity Emulsion

TRIM<sup>®</sup> E923

TRIM® E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine-free extreme-pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations while still providing the excellent non-cutting characteristics normally associated with traditional, high-quality emulsions from Master Fluid Solutions. The extreme lubricity and extreme pressure package matches heavy-duty neat oils on difficult-to-machine materials such as Inconel®, titanium, stainless steel, and high tensile strength steels.

  • Delivers exceptional lubricity and EP performance
  • Has the necessary performance to replace neat oils in certain applications
  • Very long sump life
  • Low foam even in soft water areas
  • Hard water tolerant
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives


TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM<sup>®</sup> MicroSol<sup>®</sup> 585XT

TRIM® MicroSol® 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM® coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT


TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM<sup>®</sup> MicroSol<sup>®</sup> 590XT

TRIM® MicroSol® 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol® 590XT


TRIM® OE315 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE315 NS

TRIM® OE315 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance


TRIM® OE322 NS

Ester Based Straight Cutting Oil

TRIM<sup>®</sup> OE322 NS

TRIM® OE322 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance


TRIM® OE330 NS

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE330 NS

TRIM® OE330 NS is a very heavy-duty straight cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion resistant steel alloys. TRIM OE330 NS is especially effective in slow speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high odor neat oils used in Sunnen honing machines.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance


TRIM® OE335

Vegetable Ester Based Cutting Oil

TRIM<sup>®</sup> OE335

TRIM® OE335 is a heavy-duty straight cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximize tool life in operations such as gear hobbing.

  • Extremely high lubricity ensures fantastic tool life
  • Readily biodegradable
  • Ester based formulation ensures very low misting potential
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance


TRIM® OM 303

Nonchlorinated Cutting and Lubricating Oil

TRIM<sup>®</sup> OM 303

TRIM® OM 303 is a highly formulated straight oil designed for use in conventional and Swiss style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. OM 303 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. This product is excellent for high-pressure applications such as thread rolling and thread-form tapping. OM 303 has proven itself in difficult operations on stainless and bearing steels. OM 303 provides lubrication properties similar to ISO 32 general-purpose lube oils.

  • Very light colored and clean running
  • Low foaming and low misting for use in aggressive operations
  • Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Has replaced dark, active sulfur/chlorine straight oils in several large operations while providing superior results in tool life
  • An outstanding product in thread rolling, thread form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur; therefore, does not stain parts


TRIM® SC520

General-purpose Semisynthetic

TRIM<sup>®</sup> SC520

TRIM® SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment


TRIM® SC620

Premium Low-oil Semisynthetic

TRIM<sup>®</sup> SC620

TRIM® SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment


TRIM® TAP LIGHT

Tapping Fluid

TRIM<sup>®</sup> TAP LIGHT

TRIM® TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.

  • Especially for taps ¼" diameter and smaller
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM® fluids
  • Use for added lubricity on extremely tough jobs


TRIM® TAP NC

Nonchlorinated Tapping Fluid

TRIM<sup>®</sup> TAP NC

TRIM® TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

  • Especially for taps up to 1" diameter
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Compatible with most TRIM® fluids
  • Use for added lubricity on extremely tough jobs