Home
Login
Home
Anti-corrosive-en-US.png
Number of products for application is 26

WEDOLiT AN 6723

Special-Fluid 100°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN 6723 is a thixotropic corrosion protection oil for steel. It contains a combination of inhibitors which offers long-term protection for indoor storage and short-term protection for outdoor storage. It can be applied by spraying, flooding, brushing or rolling.
WEDOLiT AN 6723 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Ideal for overseas transport
  • Stable against acidic and alkaline impurities
  • Good material compatibility
  • The full corrosion protection develops, if the product is applied at temperatures of 50 - 60°C (for spraying: The temperature has to be adapted according to the specifications of the used device)
  • For an optimal protection of the treated parts, storage temperatures ≥ 36°C and a direct exposure to solar radiation should be avoided


WEDOLiT AN 7114

High-Protection-DW-Fluid 120°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN-7114 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding or by means of rollers.

WEDOLiT AN-7114 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Ideal compatibility with VCI-foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behaviour
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Low


WEDOLiT AN 7324

Special-Fluid 100°C flash point
(aromatic content ≤ 2%)

WEDOLiT AN 7324 is a leading edge corrosion inhibitor for steel and other metals. It can be applied by spraying, flooding, brushing or rolling on parts with surface temperatures ≤ 80°C. This results in time savings and enhances productivity.

WEDOLiT AN 7324 fulfills all requirements regarding Altautorichtlinie 2000/53/EG. It is not subject to the German VOC-regulation (VOC-guideline, 31. BImSchV) nor to the Swiss regulation for VOC (Lenkungsabgabe VOCV Swiss).

  • Parts with surface temperatures ≤ 80°C can be treated without odor formation or a loss in performance
  • Suitable for VCI foils
  • Stable against acidic and alkaline impurities
  • Good material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Water displacing with a very good wetting behavior


WEDOLiT AS 1012

Dewatering-fluid 40°C flashpoint
(aromatic content ≤ 2%)

WEDOLiT AS 1012 is a dewatering fluid with corrosion protection properties. It uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can efficiently be dewatered. It is mainly used as an immersion bath at room temperature.

  • Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions or synthetic coolants are removed from the metal surface
  • After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
  • Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
  • Development of a clear phase boundary between the water and the product, without forming an emulsion phase
  • Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils
  • Excellent bath-life
  • Additive loss due to water contact: None


WEDOLiT AS 1723

High-Protection-Waxdispersion-Fluid 30°C flash point
(aromatic content ≤ 2%)

WEDOLIiT AS 1723 is a universal, solvent-containing, long-term corrosion protection. It contains a newly formulated thixotropic wax dispersion, which allows a long period of protection under covered storage as well as a limited period of outdoor storage. It can be applied by spraying, flooding, brushing or by means of rollers.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • After the evaporation of the solvent (quick drying time), a waxy, light-coloured, non-adhesive and non-dust-binding, age-resistant protective film is formed on the treated surface
  • Good protection for outdoor storage
  • It´s recommended to homogenise the product before use or after a longer storage period
  • Protection against atmospheric contaminations such as dissolved gases that cannot penetrate the protective film (water vapour permeability)


WEDOLiT AS 2241

High-Protection-DW-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-2241 is a modern formulated corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage). Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 2241-1

High-Protection-DW-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 2241-1 is a modern formulated corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 2241-3

High-Protection-DW-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-2241-3 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Low


WEDOLiT AS 2251

High-Protection-DW-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-2251 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Very low


WEDOLiT AS 2603

High-Protection-Waxdispersion-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 2603 is a universal, solvent-containing, long-term corrosion protection. It contains a newly formulated thixotropic wax dispersion, which allows a long period of protection under covered storage as well as a limited storage period for outdoor storage. It can be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • After the evaporation of the solvent (quick drying time), a waxy, light-coloured, non-adhesive and non-dust-binding, age-resistant protective film is formed on the treated surface
  • Good protection for outdoor storage
  • It´s recommended to homogenise the product before use or after a longer storage period
  • Protection against atmospheric contaminations such as dissolved gases that cannot penetrate the protective film (water vapour permeability)


WEDOLiT AS 3040

Dewatering-fluid 60°C flashpoint
(aromatic content ≤ 2%)

WEDOLiT AS 3040 is a dewatering fluid with corrosion protection properties that uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can be efficiently dewatered. It is mainly used as an immersion bath at room temperature.

  • Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions and synthetic coolants are removed from the metal surface
  • After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
  • Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
  • Development of a clear phase boundary between the water and the product, without forming an emulsion phase
  • Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils
  • Excellent bath-life
  • Additive loss due to water contact: None


WEDOLiT AS 4111

Special-Fluid 60°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 4111 is a leading edge universally applicable, corrosion protection which offers a long-term protection for indoor storage. It has been especially developed for loosening rusted parts and can be applied by spraying, flooding or via an immersion bath.

  • Suitable for overseas transport
  • Rust remover for humidity-related ignition problems in electrical systems
  • Loosens rusted screws, nuts, joints, hinges, switches and mechanisms
  • Cleans dirty tools and components and protects them from corrosion
  • Stable against acidic and alkaline impurities
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Water displacing with very good wetting behavior
  • Additive loss due to water contact: Low


WEDOLiT AS 4116

High-Protection-DW-Fluid 60°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-4116 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing of rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 4116-2

High-Protection-DW-Fluid 60°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-4116-2 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 4116-3

High-Protection-DW-Fluid 60°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS-4116-3 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Very low


WEDOLiT AS 4143

Dewatering-fluid 60°C flashpoint
(aromatic content ≤ 2%)

WEDOLiT AS 4143 is a dewatering fluid with corrosion protection properties. It uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can be efficiently dewatered. It is mainly used as an immersion bath at room temperature.

  • Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions and synthetic coolants are removed from the metal surface
  • After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
  • Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
  • Development of a clear phase boundary between the water and the product, without forming an emulsion phase
  • Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils
  • Excellent bath-life
  • Additive loss due to water contact: None


WEDOLiT AS 9921-40

High-Protection-Calibration-Fluid 40°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 9921-40 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow bodies. It can also be applied by spraying, flooding, brushing or rolling. Due to the high oil content, it can also be used in straightening processes.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Can be used in straightening or light forming processes after the solvent has evaporated
  • Stable against acidic and alkaline contamination
  • Excellent bath life
  • Excellent material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 9921-60

High-Protection-Calibration-Fluid 60°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 9921-60 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow bodies. It can also be applied by spraying, flooding, brushing or rolling. Due to the high oil content, it can also be used in straightening processes.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Can be used in straightening or light forming processes after the solvent has evaporated
  • Stable against acidic and alkaline contamination
  • Excellent bath life
  • Excellent material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AS 9921-80

High-Protection-Calibration-Fluid 80°C flash point
(aromatic content ≤ 2%)

WEDOLiT AS 9921-80 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow bodies. It can also be applied by spraying, flooding, brushing or rolling. Due to the high oil content, it can also be used in straightening processes.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Can be used in straightening or light forming processes after the solvent has evaporated
  • Stable against acidic and alkaline contamination
  • Excellent bath life
  • Excellent material compatibility
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low


WEDOLiT AW 8321 (K 110)

Water-miscible High-performance Fluid

WEDOLiT AW 8321 is universally applicable for parts cleaning and corrosion protection. The mineral oil free product is not only suitable for steel, but also for non-ferrous metals. Utilizing the latest technology, AW 8321 offers the possibility for a boron and formaldehyde free application.

  • The product forms a stable emulsion, regardless of the concentration. Due to the electrolyte and temperature stability, an application in heated baths is possible (recommended temperature 60 - 80°C)
  • Even at high temperatures the product is stable against contaminations (e.g. sodium sulfonates or phosphates)
  • Easily removable with solvents or alkaline industrial cleaners
  • For the corrosion protection it´s important that treated parts are completely dry before packaging. Dependent on the concentration a minimal to slightly noticeable film is formed on the metal surface
  • Very good compatibility with VCI foils
  • Outstanding material compatibility (even at higher concentration)


WEDOLiT K 118

Corrosion protection

WEDOLiT K 118 is a solvent free rust preventive oil of low viscosity for steel. It contains an inhibitor-combination, solved in mineral oil, attuned for temporary corrosion protection at covered storage. It forms a thin non ageing protective film on the treated surface.

WEDOLiT K 118 offers a very good corrosion protection on bright steel. At steel sheets, tested according DIN EN ISO 6270-2 AHT, more than 10 cycles will be reached. Weathering tests at storage under a roof show under normal conditions, without direct influence of wind- driven rain, several months storage time without corrosion, provided that the material has been moistened with an even layer corrosion protection oil.

WEDOLiT K 118 was adjusted with regard to viscosity and flash point, so that both applications are possible, direct in the working process, e.g. straightening machine, just as in dipping process at ambient temperature.

WEDOLiT K 118 can easily be removed, even after a longer storage time of the oiled materials, with organic solvents, like hydrocarbons or water soluble alkaline industrial cleansers.

WEDOLiT K 118 contains no volatile organic compounds. Therefore it is not subject of the German VOC-guideline (VOC-guideline 31rd BImSchV) as well as the Swiss ordinance on the incentive tax on volatile organic compounds.



    WEDOLiT K 119

    Anti-corrosion agent and straightening-oil

    WEDOLiT K 119 is a solvent free straightening– and corrosion protection oil for steel and galvanized steel, as well as for galvanized or yellow-chromated work-pieces. It contains a combination of inhibitors, which gives temporary corrosion protection for a storage under roof.

    WEDOLiT K 119 forms an ageing-resistant protection film on the treated surface. This film can easily beremoved - even after longer storage time of the protected material - with organic solvents or water soluble, industrial cleaning agents.

    For this reason WEDOLiT K 119 can be used for corrosion prevention by spray-application at the outlet of the annealing furnace. During the application, the tube temperature shouldn’t be over 120°C.



      WEDOLiT K 721

      Anti-corrosive agent

      WEDOLiT K 721 is an anti-corrosive protective medium of low viscosity for steel. It contains an inhibitor combination attuned to affording temporary protection from corrosion. When the solvent has evaporated a thin film of oil impervious to age forms on the treated surface which grants protection under covered storage facilities for several months and even allows a short period of exposure to weather in the open when, for example, goods are being transported from one factory location to another. This film can be easily removed even after a long period with the aid of organic solvents or water-soluble industrial detergents. As complete anti-corrosion protection however is not afforded until the solvent-free film has formed, a period of storage lasting some 24 hours should be observed for evaporation before packaging the freshly oiled material in cases with oiled paper or foil inserts.

      WEDOLiT K 721 is adjusted to give temporary corrosion protection to bright-drawn steel. In addition it is also suitable for the after-treatment of phosphatised parts to the extent that these are immersed in the oil free of water.

      WEDOLiT K 721 meets, after the evaporation of the solvent, all the requirements demanded by VDA 230- 201.

      WEDOLiT K 721 is the preferred medium for immersion baths in treating hollow bodies (pipe and tube, for example) at ambient temperatures because of its low viscosity. It can also be applied by spraying, flow coating or by means of rollers.

      WEDOLiT K 721 contains a solvent based mineral oil for adjusting viscosity with a flash point above 60°C.



        WEDOLiT K 722

        Corrosion Protection

        WEDOLiT K 722 is a low-viscosity corrosion protection oil for steel. It contains an inhibitor combination set for temporary corrosion protection in roofed storage. After evaporation of the solvent, a thin, age-resistant protective film with an oily film character is formed on the treated surface. This can be easily removed with organic solvents or water-soluble industrial cleaners even after prolonged storage of the preserved material. Since full corrosion protection is only provided in a solvent-free film, a storage time of approx. 24 hours for evaporation of the solvent should be observed before packing the freshly oiled material in boxes with oil paper or film.

        WEDOLiT K 722 is adjusted for corrosion protection of bright steel. Despite the extremely low film weights of only 1-2 g/m² treated surface, excellent corrosion protection is provided both in tests according to DIN EN ISO 6270-2 AHT and in hall weathering. Even with complete free weathering (sprinkling) a good corrosion protection is still given.

        WEDOLiT K 722 is strongly water displacing - Dewatering effect. The water absorbed by the oil bath separates from it after a short standing time and can be drained off via a valve at the bottom of the bath tank.

        WEDOLiT K 722 is preferably used as an impregnation bath at room temperature for the treatment of hollow bodies, e.g. pipes, due to its low viscosity. It can also be applied by spraying, flooding or rollers.

        WEDOLiT K 722 is approved by DaimlerChrysler under the number QSO 040212.



          WEDOLIT K 725

          Anticorrosion Agent

          WEDOLiT K 725 is an anticorrosion agent for steel. It is suitable for temporary corrosion prevention in storage under a roof. Its protective effect results from a combination of film-forming inhibitors. After the evaporation of the solvent, a thin, waxy, non-ageing protective film develops on the treated surface. This film don’t run-off by storage of the treated material. Since full corrosion prevention can only be obtained with the solvent-free film, a drying time of approximately 24 hours - especially before packing in boxes with oiled papers or foils - must be keep evaporating the solvent completely. The protective film can be easily removed with organic solvents or water-soluble industrial cleaning agents after a longer storage of the preserved material.

          WEDOLiT K 725 displaces water - the so-called dewatering effect. By this means, the rests of aqueous treatment liquids are removed from the surface of the parts and the danger of corrosion below the film is eliminated. After a short period of time, the water separates from the immersion bath and can be easily removed from the bottom of the bath tank.

          Because of the excellent non-ageing-stability of the protective film, WEDOLIT K 725 is preferable used for the corrosion protection of bright-rolled or polished surfaces. Its low viscosity enable the application as immersion bath by ambient temperature for the treatment of hollow parts, e.g. tubes (pipes). It can also be used by spraying, flooding or by means of rollers.

          WEDOLiTK 725 can jelly on temperatures less than 15°C. This process is reversible, i.e. through elevating the temperatures above 20°C and homogenising the product, the original viscosity reappears.



            WEDOLiT N 22-3

            Deep-drawing-agent

            WEDOLiT N 22-3 is a thixotropic, water insoluble, deep-drawing agent. Trough a combination of polar active substances with E.P.-(Extreme-Pressure) additives it is excellent suitable for non-cutting cold shaping of uncoated C-steels, zinc- and zinc/nickel-coated and aluminated sheet steel as for aluminium and aluminium alloys.

            WEDOLiT N 22-3 fulfills all requirements of all german automotive manufacturers according to VDA 230-213 and QPA VW-001, and has been approved by all VDA members.

            WEDOLiT N 22-3 can be applied by spraying or by hand with a brush or by means of rollers. A filtration over a fine-meshed filter (< 50 µ) is absolute to avoid, as the thickener will be filtered out. Heating the oil of approximately of 40-50°C before application is possible, without loss of the thixotropic effect after cooling.

            WEDOLiT N 22-3 acts at the same time as a corrosion protection agent. Represervation of the drawn sheet is not necessary. The film remaining on the component after drawing has good ageing stability and can be easily removed with organic solvents or water soluble, mild alkaline industrial cleaning agents, even after long storage of the components. After degreasing, phosphating treatment can be carried out without problems. WEDOLiT N 22-3 is free of insoluble pigments, such as graphite or molybdenum disulphide.